From: Dmitry Baryshkov Date: Fri, 7 Dec 2007 02:18:03 +0000 (-0800) Subject: USB: gadget: pxa2xx_udc supports inverted vbus X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=d4a8d46d9129fbb26b4c2d3143b1b0975a9b4ae4;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git USB: gadget: pxa2xx_udc supports inverted vbus Some boards (like e.g. Tosa) invert the VBUS-detection signal: it's low when a host is supplying VBUS, and high otherwise. Allow specifying whether gpio_vbus value is inverted. Signed-off-by: Dmitry Baryshkov Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c index 4abf9d26d615..8bd9ce26bd95 100644 --- a/drivers/usb/gadget/pxa2xx_udc.c +++ b/drivers/usb/gadget/pxa2xx_udc.c @@ -127,8 +127,10 @@ static int is_vbus_present(void) { struct pxa2xx_udc_mach_info *mach = the_controller->mach; - if (mach->gpio_vbus) - return gpio_get_value(mach->gpio_vbus); + if (mach->gpio_vbus) { + int value = gpio_get_value(mach->gpio_vbus); + return mach->gpio_vbus_inverted ? !value : value; + } if (mach->udc_is_connected) return mach->udc_is_connected(); return 1; @@ -1398,6 +1400,9 @@ static irqreturn_t udc_vbus_irq(int irq, void *_dev) struct pxa2xx_udc *dev = _dev; int vbus = gpio_get_value(dev->mach->gpio_vbus); + if (dev->mach->gpio_vbus_inverted) + vbus = !vbus; + pxa2xx_udc_vbus_session(&dev->gadget, vbus); return IRQ_HANDLED; } diff --git a/include/asm-arm/mach/udc_pxa2xx.h b/include/asm-arm/mach/udc_pxa2xx.h index ff0a95715a07..f191e147ea90 100644 --- a/include/asm-arm/mach/udc_pxa2xx.h +++ b/include/asm-arm/mach/udc_pxa2xx.h @@ -19,7 +19,9 @@ struct pxa2xx_udc_mach_info { * with on-chip GPIOs not Lubbock's wierd hardware, can have a sane * VBUS IRQ and omit the methods above. Store the GPIO number * here; for GPIO 0, also mask in one of the pxa_gpio_mode() bits. + * Note that sometimes the signals go through inverters... */ + bool gpio_vbus_inverted; u16 gpio_vbus; /* high == vbus present */ u16 gpio_pullup; /* high == pullup activated */ };