From: Praveen Madhavan Date: Fri, 16 Jan 2015 16:00:20 +0000 (+0530) Subject: csiostor:Removed file csio_hw_t4.c X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=d39443152399fbfd3faaca0d540d952206a93fc0;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git csiostor:Removed file csio_hw_t4.c We have decided not to productize FCoE on T4. Hence file is removed. Signed-off-by: Praveen Madhavan Signed-off-by: David S. Miller --- diff --git a/drivers/scsi/csiostor/Makefile b/drivers/scsi/csiostor/Makefile index 913b9a92fb06..3681a3fbd499 100644 --- a/drivers/scsi/csiostor/Makefile +++ b/drivers/scsi/csiostor/Makefile @@ -8,5 +8,5 @@ ccflags-y += -I$(srctree)/drivers/net/ethernet/chelsio/cxgb4 obj-$(CONFIG_SCSI_CHELSIO_FCOE) += csiostor.o csiostor-objs := csio_attr.o csio_init.o csio_lnode.o csio_scsi.o \ - csio_hw.o csio_hw_t4.o csio_hw_t5.o csio_isr.o \ + csio_hw.o csio_hw_t5.o csio_isr.o \ csio_mb.o csio_rnode.o csio_wr.o diff --git a/drivers/scsi/csiostor/csio_hw_t4.c b/drivers/scsi/csiostor/csio_hw_t4.c deleted file mode 100644 index 14884e46fd99..000000000000 --- a/drivers/scsi/csiostor/csio_hw_t4.c +++ /dev/null @@ -1,404 +0,0 @@ -/* - * This file is part of the Chelsio FCoE driver for Linux. - * - * Copyright (c) 2008-2013 Chelsio Communications, Inc. All rights reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * OpenIB.org BSD license below: - * - * Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * - Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * - Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ - -#include "csio_hw.h" -#include "csio_init.h" - -/* - * Return the specified PCI-E Configuration Space register from our Physical - * Function. We try first via a Firmware LDST Command since we prefer to let - * the firmware own all of these registers, but if that fails we go for it - * directly ourselves. - */ -static uint32_t -csio_t4_read_pcie_cfg4(struct csio_hw *hw, int reg) -{ - u32 val = 0; - struct csio_mb *mbp; - int rv; - struct fw_ldst_cmd *ldst_cmd; - - mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); - if (!mbp) { - CSIO_INC_STATS(hw, n_err_nomem); - pci_read_config_dword(hw->pdev, reg, &val); - return val; - } - - csio_mb_ldst(hw, mbp, CSIO_MB_DEFAULT_TMO, reg); - rv = csio_mb_issue(hw, mbp); - - /* - * If the LDST Command suucceeded, exctract the returned register - * value. Otherwise read it directly ourself. - */ - if (rv == 0) { - ldst_cmd = (struct fw_ldst_cmd *)(mbp->mb); - val = ntohl(ldst_cmd->u.pcie.data[0]); - } else - pci_read_config_dword(hw->pdev, reg, &val); - - mempool_free(mbp, hw->mb_mempool); - - return val; -} - -static int -csio_t4_set_mem_win(struct csio_hw *hw, uint32_t win) -{ - u32 bar0; - u32 mem_win_base; - - /* - * Truncation intentional: we only read the bottom 32-bits of the - * 64-bit BAR0/BAR1 ... We use the hardware backdoor mechanism to - * read BAR0 instead of using pci_resource_start() because we could be - * operating from within a Virtual Machine which is trapping our - * accesses to our Configuration Space and we need to set up the PCI-E - * Memory Window decoders with the actual addresses which will be - * coming across the PCI-E link. - */ - bar0 = csio_t4_read_pcie_cfg4(hw, PCI_BASE_ADDRESS_0); - bar0 &= PCI_BASE_ADDRESS_MEM_MASK; - - mem_win_base = bar0 + MEMWIN_BASE; - - /* - * Set up memory window for accessing adapter memory ranges. (Read - * back MA register to ensure that changes propagate before we attempt - * to use the new values.) - */ - csio_wr_reg32(hw, mem_win_base | BIR_V(0) | - WINDOW_V(ilog2(MEMWIN_APERTURE) - 10), - PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A, win)); - csio_rd_reg32(hw, - PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A, win)); - return 0; -} - -/* - * Interrupt handler for the PCIE module. - */ -static void -csio_t4_pcie_intr_handler(struct csio_hw *hw) -{ - static struct intr_info sysbus_intr_info[] = { - { RNPP_F, "RXNP array parity error", -1, 1 }, - { RPCP_F, "RXPC array parity error", -1, 1 }, - { RCIP_F, "RXCIF array parity error", -1, 1 }, - { RCCP_F, "Rx completions control array parity error", -1, 1 }, - { RFTP_F, "RXFT array parity error", -1, 1 }, - { 0, NULL, 0, 0 } - }; - static struct intr_info pcie_port_intr_info[] = { - { TPCP_F, "TXPC array parity error", -1, 1 }, - { TNPP_F, "TXNP array parity error", -1, 1 }, - { TFTP_F, "TXFT array parity error", -1, 1 }, - { TCAP_F, "TXCA array parity error", -1, 1 }, - { TCIP_F, "TXCIF array parity error", -1, 1 }, - { RCAP_F, "RXCA array parity error", -1, 1 }, - { OTDD_F, "outbound request TLP discarded", -1, 1 }, - { RDPE_F, "Rx data parity error", -1, 1 }, - { TDUE_F, "Tx uncorrectable data error", -1, 1 }, - { 0, NULL, 0, 0 } - }; - - static struct intr_info pcie_intr_info[] = { - { MSIADDRLPERR_F, "MSI AddrL parity error", -1, 1 }, - { MSIADDRHPERR_F, "MSI AddrH parity error", -1, 1 }, - { MSIDATAPERR_F, "MSI data parity error", -1, 1 }, - { MSIXADDRLPERR_F, "MSI-X AddrL parity error", -1, 1 }, - { MSIXADDRHPERR_F, "MSI-X AddrH parity error", -1, 1 }, - { MSIXDATAPERR_F, "MSI-X data parity error", -1, 1 }, - { MSIXDIPERR_F, "MSI-X DI parity error", -1, 1 }, - { PIOCPLPERR_F, "PCI PIO completion FIFO parity error", -1, 1 }, - { PIOREQPERR_F, "PCI PIO request FIFO parity error", -1, 1 }, - { TARTAGPERR_F, "PCI PCI target tag FIFO parity error", -1, 1 }, - { CCNTPERR_F, "PCI CMD channel count parity error", -1, 1 }, - { CREQPERR_F, "PCI CMD channel request parity error", -1, 1 }, - { CRSPPERR_F, "PCI CMD channel response parity error", -1, 1 }, - { DCNTPERR_F, "PCI DMA channel count parity error", -1, 1 }, - { DREQPERR_F, "PCI DMA channel request parity error", -1, 1 }, - { DRSPPERR_F, "PCI DMA channel response parity error", -1, 1 }, - { HCNTPERR_F, "PCI HMA channel count parity error", -1, 1 }, - { HREQPERR_F, "PCI HMA channel request parity error", -1, 1 }, - { HRSPPERR_F, "PCI HMA channel response parity error", -1, 1 }, - { CFGSNPPERR_F, "PCI config snoop FIFO parity error", -1, 1 }, - { FIDPERR_F, "PCI FID parity error", -1, 1 }, - { INTXCLRPERR_F, "PCI INTx clear parity error", -1, 1 }, - { MATAGPERR_F, "PCI MA tag parity error", -1, 1 }, - { PIOTAGPERR_F, "PCI PIO tag parity error", -1, 1 }, - { RXCPLPERR_F, "PCI Rx completion parity error", -1, 1 }, - { RXWRPERR_F, "PCI Rx write parity error", -1, 1 }, - { RPLPERR_F, "PCI replay buffer parity error", -1, 1 }, - { PCIESINT_F, "PCI core secondary fault", -1, 1 }, - { PCIEPINT_F, "PCI core primary fault", -1, 1 }, - { UNXSPLCPLERR_F, "PCI unexpected split completion error", -1, - 0 }, - { 0, NULL, 0, 0 } - }; - - int fat; - fat = csio_handle_intr_status(hw, - PCIE_CORE_UTL_SYSTEM_BUS_AGENT_STATUS_A, - sysbus_intr_info) + - csio_handle_intr_status(hw, - PCIE_CORE_UTL_PCI_EXPRESS_PORT_STATUS_A, - pcie_port_intr_info) + - csio_handle_intr_status(hw, PCIE_INT_CAUSE_A, pcie_intr_info); - if (fat) - csio_hw_fatal_err(hw); -} - -/* - * csio_t4_flash_cfg_addr - return the address of the flash configuration file - * @hw: the HW module - * - * Return the address within the flash where the Firmware Configuration - * File is stored. - */ -static unsigned int -csio_t4_flash_cfg_addr(struct csio_hw *hw) -{ - return FLASH_CFG_OFFSET; -} - -/* - * csio_t4_mc_read - read from MC through backdoor accesses - * @hw: the hw module - * @idx: not used for T4 adapter - * @addr: address of first byte requested - * @data: 64 bytes of data containing the requested address - * @ecc: where to store the corresponding 64-bit ECC word - * - * Read 64 bytes of data from MC starting at a 64-byte-aligned address - * that covers the requested address @addr. If @parity is not %NULL it - * is assigned the 64-bit ECC word for the read data. - */ -static int -csio_t4_mc_read(struct csio_hw *hw, int idx, uint32_t addr, __be32 *data, - uint64_t *ecc) -{ - int i; - - if (csio_rd_reg32(hw, MC_BIST_CMD_A) & START_BIST_F) - return -EBUSY; - csio_wr_reg32(hw, addr & ~0x3fU, MC_BIST_CMD_ADDR_A); - csio_wr_reg32(hw, 64, MC_BIST_CMD_LEN_A); - csio_wr_reg32(hw, 0xc, MC_BIST_DATA_PATTERN_A); - csio_wr_reg32(hw, BIST_OPCODE_V(1) | START_BIST_F | BIST_CMD_GAP_V(1), - MC_BIST_CMD_A); - i = csio_hw_wait_op_done_val(hw, MC_BIST_CMD_A, START_BIST_F, - 0, 10, 1, NULL); - if (i) - return i; - -#define MC_DATA(i) MC_BIST_STATUS_REG(MC_BIST_STATUS_RDATA_A, i) - - for (i = 15; i >= 0; i--) - *data++ = htonl(csio_rd_reg32(hw, MC_DATA(i))); - if (ecc) - *ecc = csio_rd_reg64(hw, MC_DATA(16)); -#undef MC_DATA - return 0; -} - -/* - * csio_t4_edc_read - read from EDC through backdoor accesses - * @hw: the hw module - * @idx: which EDC to access - * @addr: address of first byte requested - * @data: 64 bytes of data containing the requested address - * @ecc: where to store the corresponding 64-bit ECC word - * - * Read 64 bytes of data from EDC starting at a 64-byte-aligned address - * that covers the requested address @addr. If @parity is not %NULL it - * is assigned the 64-bit ECC word for the read data. - */ -static int -csio_t4_edc_read(struct csio_hw *hw, int idx, uint32_t addr, __be32 *data, - uint64_t *ecc) -{ - int i; - - idx *= EDC_STRIDE; - if (csio_rd_reg32(hw, EDC_BIST_CMD_A + idx) & START_BIST_F) - return -EBUSY; - csio_wr_reg32(hw, addr & ~0x3fU, EDC_BIST_CMD_ADDR_A + idx); - csio_wr_reg32(hw, 64, EDC_BIST_CMD_LEN_A + idx); - csio_wr_reg32(hw, 0xc, EDC_BIST_DATA_PATTERN_A + idx); - csio_wr_reg32(hw, BIST_OPCODE_V(1) | BIST_CMD_GAP_V(1) | START_BIST_F, - EDC_BIST_CMD_A + idx); - i = csio_hw_wait_op_done_val(hw, EDC_BIST_CMD_A + idx, START_BIST_F, - 0, 10, 1, NULL); - if (i) - return i; - -#define EDC_DATA(i) (EDC_BIST_STATUS_REG(EDC_BIST_STATUS_RDATA_A, i) + idx) - - for (i = 15; i >= 0; i--) - *data++ = htonl(csio_rd_reg32(hw, EDC_DATA(i))); - if (ecc) - *ecc = csio_rd_reg64(hw, EDC_DATA(16)); -#undef EDC_DATA - return 0; -} - -/* - * csio_t4_memory_rw - read/write EDC 0, EDC 1 or MC via PCIE memory window - * @hw: the csio_hw - * @win: PCI-E memory Window to use - * @mtype: memory type: MEM_EDC0, MEM_EDC1, MEM_MC0 (or MEM_MC) or MEM_MC1 - * @addr: address within indicated memory type - * @len: amount of memory to transfer - * @buf: host memory buffer - * @dir: direction of transfer 1 => read, 0 => write - * - * Reads/writes an [almost] arbitrary memory region in the firmware: the - * firmware memory address, length and host buffer must be aligned on - * 32-bit boudaries. The memory is transferred as a raw byte sequence - * from/to the firmware's memory. If this memory contains data - * structures which contain multi-byte integers, it's the callers - * responsibility to perform appropriate byte order conversions. - */ -static int -csio_t4_memory_rw(struct csio_hw *hw, u32 win, int mtype, u32 addr, - u32 len, uint32_t *buf, int dir) -{ - u32 pos, start, offset, memoffset, bar0; - u32 edc_size, mc_size, mem_reg, mem_aperture, mem_base; - - /* - * Argument sanity checks ... - */ - if ((addr & 0x3) || (len & 0x3)) - return -EINVAL; - - /* Offset into the region of memory which is being accessed - * MEM_EDC0 = 0 - * MEM_EDC1 = 1 - * MEM_MC = 2 -- T4 - */ - edc_size = EDRAM0_SIZE_G(csio_rd_reg32(hw, MA_EDRAM0_BAR_A)); - if (mtype != MEM_MC1) - memoffset = (mtype * (edc_size * 1024 * 1024)); - else { - mc_size = EXT_MEM_SIZE_G(csio_rd_reg32(hw, - MA_EXT_MEMORY_BAR_A)); - memoffset = (MEM_MC0 * edc_size + mc_size) * 1024 * 1024; - } - - /* Determine the PCIE_MEM_ACCESS_OFFSET */ - addr = addr + memoffset; - - /* - * Each PCI-E Memory Window is programmed with a window size -- or - * "aperture" -- which controls the granularity of its mapping onto - * adapter memory. We need to grab that aperture in order to know - * how to use the specified window. The window is also programmed - * with the base address of the Memory Window in BAR0's address - * space. For T4 this is an absolute PCI-E Bus Address. For T5 - * the address is relative to BAR0. - */ - mem_reg = csio_rd_reg32(hw, - PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A, win)); - mem_aperture = 1 << (WINDOW_V(mem_reg) + 10); - mem_base = PCIEOFST_G(mem_reg) << 10; - - bar0 = csio_t4_read_pcie_cfg4(hw, PCI_BASE_ADDRESS_0); - bar0 &= PCI_BASE_ADDRESS_MEM_MASK; - mem_base -= bar0; - - start = addr & ~(mem_aperture-1); - offset = addr - start; - - csio_dbg(hw, "csio_t4_memory_rw: mem_reg: 0x%x, mem_aperture: 0x%x\n", - mem_reg, mem_aperture); - csio_dbg(hw, "csio_t4_memory_rw: mem_base: 0x%x, mem_offset: 0x%x\n", - mem_base, memoffset); - csio_dbg(hw, "csio_t4_memory_rw: bar0: 0x%x, start:0x%x, offset:0x%x\n", - bar0, start, offset); - csio_dbg(hw, "csio_t4_memory_rw: mtype: %d, addr: 0x%x, len: %d\n", - mtype, addr, len); - - for (pos = start; len > 0; pos += mem_aperture, offset = 0) { - /* - * Move PCI-E Memory Window to our current transfer - * position. Read it back to ensure that changes propagate - * before we attempt to use the new value. - */ - csio_wr_reg32(hw, pos, - PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET_A, win)); - csio_rd_reg32(hw, - PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET_A, win)); - - while (offset < mem_aperture && len > 0) { - if (dir) - *buf++ = csio_rd_reg32(hw, mem_base + offset); - else - csio_wr_reg32(hw, *buf++, mem_base + offset); - - offset += sizeof(__be32); - len -= sizeof(__be32); - } - } - return 0; -} - -/* - * csio_t4_dfs_create_ext_mem - setup debugfs for MC to read the values - * @hw: the csio_hw - * - * This function creates files in the debugfs with external memory region MC. - */ -static void -csio_t4_dfs_create_ext_mem(struct csio_hw *hw) -{ - u32 size; - int i = csio_rd_reg32(hw, MA_TARGET_MEM_ENABLE_A); - - if (i & EXT_MEM_ENABLE_F) { - size = csio_rd_reg32(hw, MA_EXT_MEMORY_BAR_A); - csio_add_debugfs_mem(hw, "mc", MEM_MC, - EXT_MEM_SIZE_G(size)); - } -} - -/* T4 adapter specific function */ -struct csio_hw_chip_ops t4_ops = { - .chip_set_mem_win = csio_t4_set_mem_win, - .chip_pcie_intr_handler = csio_t4_pcie_intr_handler, - .chip_flash_cfg_addr = csio_t4_flash_cfg_addr, - .chip_mc_read = csio_t4_mc_read, - .chip_edc_read = csio_t4_edc_read, - .chip_memory_rw = csio_t4_memory_rw, - .chip_dfs_create_ext_mem = csio_t4_dfs_create_ext_mem, -};