From: Linus Walleij Date: Tue, 19 Apr 2016 09:23:22 +0000 (+0200) Subject: MIPS: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=d30a2b47d4c2b75573d93f60655d48ba8e3ed2b3;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git MIPS: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB This replaces: - "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB" as this can now be selected directly. - "select ARCH_WANT_OPTIONAL_GPIOLIB" with no dependency: GPIOLIB is now selectable by everyone, so we need not declare our intent to select it. When ordering the symbols the following rationale was used: if the selects were in alphabetical order, I moved select GPIOLIB to be in alphabetical order, but if the selects were not maintained in alphabetical order, I just replaced "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB". Cc: Michael Büsch Cc: linux-mips@linux-mips.org Acked-by: Ralf Baechle Signed-off-by: Linus Walleij --- diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 2018c2b0e078..512b5def854d 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -79,7 +79,7 @@ config MIPS_ALCHEMY select SYS_HAS_CPU_MIPS32_R1 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_APM_EMULATION - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB select SYS_SUPPORTS_ZBOOT select COMMON_CLK @@ -98,7 +98,7 @@ config AR7 select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_MIPS16 select SYS_SUPPORTS_ZBOOT_UART16550 - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB select VLYNQ select HAVE_CLK help @@ -122,11 +122,11 @@ config ATH25 config ATH79 bool "Atheros AR71XX/AR724X/AR913X based boards" select ARCH_HAS_RESET_CONTROLLER - select ARCH_REQUIRE_GPIOLIB select BOOT_RAW select CEVT_R4K select CSRC_R4K select DMA_NONCOHERENT + select GPIOLIB select HAVE_CLK select COMMON_CLK select CLKDEV_LOOKUP @@ -170,7 +170,6 @@ config BMIPS_GENERIC select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN select USB_OHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN - select ARCH_WANT_OPTIONAL_GPIOLIB help Build a generic DT-based kernel image that boots on select BCM33xx cable modem chips, BCM63xx DSL chips, and BCM7xxx set-top @@ -179,7 +178,6 @@ config BMIPS_GENERIC config BCM47XX bool "Broadcom BCM47XX based boards" - select ARCH_WANT_OPTIONAL_GPIOLIB select BOOT_RAW select CEVT_R4K select CSRC_R4K @@ -211,7 +209,7 @@ config BCM63XX select SYS_SUPPORTS_BIG_ENDIAN select SYS_HAS_EARLY_PRINTK select SWAP_IO_SPACE - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB select HAVE_CLK select MIPS_L1_CACHE_SHIFT_4 help @@ -305,7 +303,7 @@ config MACH_INGENIC select SYS_SUPPORTS_ZBOOT_UART16550 select DMA_NONCOHERENT select IRQ_MIPS_CPU - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB select COMMON_CLK select GENERIC_IRQ_CHIP select BUILTIN_DTB @@ -325,7 +323,7 @@ config LANTIQ select SYS_SUPPORTS_MIPS16 select SYS_SUPPORTS_MULTITHREADING select SYS_HAS_EARLY_PRINTK - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB select SWAP_IO_SPACE select BOOT_RAW select CLKDEV_LOOKUP @@ -377,7 +375,6 @@ config MACH_LOONGSON64 config MACH_PISTACHIO bool "IMG Pistachio SoC based boards" - select ARCH_REQUIRE_GPIOLIB select BOOT_ELF32 select BOOT_RAW select CEVT_R4K @@ -385,6 +382,7 @@ config MACH_PISTACHIO select COMMON_CLK select CSRC_R4K select DMA_MAYBE_COHERENT + select GPIOLIB select IRQ_MIPS_CPU select LIBFDT select MFD_SYSCON @@ -406,13 +404,13 @@ config MACH_PISTACHIO config MACH_XILFPGA bool "MIPSfpga Xilinx based boards" - select ARCH_REQUIRE_GPIOLIB select BOOT_ELF32 select BOOT_RAW select BUILTIN_DTB select CEVT_R4K select COMMON_CLK select CSRC_R4K + select GPIOLIB select IRQ_MIPS_CPU select LIBFDT select MIPS_CPU_SCACHE @@ -536,7 +534,7 @@ config MACH_VR41XX select CSRC_R4K select SYS_HAS_CPU_VR41XX select SYS_SUPPORTS_MIPS16 - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB config NXP_STB220 bool "NXP STB220 board" @@ -856,7 +854,7 @@ config MIKROTIK_RB532 select SYS_SUPPORTS_LITTLE_ENDIAN select SWAP_IO_SPACE select BOOT_RAW - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB select MIPS_L1_CACHE_SHIFT_4 help Support the Mikrotik(tm) RouterBoard 532 series, @@ -879,7 +877,7 @@ config CAVIUM_OCTEON_SOC select HW_HAS_PCI select ZONE_DMA32 select HOLES_IN_ZONE - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB select LIBFDT select USE_OF select ARCH_SPARSEMEM_ENABLE @@ -937,7 +935,7 @@ config NLM_XLP_BOARD select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL select ARCH_PHYS_ADDR_T_64BIT - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_HIGHMEM @@ -1077,7 +1075,7 @@ config MIPS_CLOCK_VSYSCALL def_bool CSRC_R4K || CLKSRC_MIPS_GIC config GPIO_TXX9 - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB bool config FW_CFE @@ -1342,7 +1340,7 @@ config CPU_LOONGSON3 select CPU_SUPPORTS_HUGEPAGES select WEAK_ORDERING select WEAK_REORDERING_BEYOND_LLSC - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB help The Loongson 3 processor implements the MIPS64R2 instruction set with many extensions. @@ -1362,7 +1360,7 @@ config CPU_LOONGSON2F bool "Loongson 2F" depends on SYS_HAS_CPU_LOONGSON2F select CPU_LOONGSON2 - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB help The Loongson 2F processor implements the MIPS III instruction set with many extensions. diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig index 7fa24881b708..88b4d6a792c1 100644 --- a/arch/mips/alchemy/Kconfig +++ b/arch/mips/alchemy/Kconfig @@ -20,7 +20,7 @@ config MIPS_MTX1 config MIPS_DB1XXX bool "Alchemy DB1XXX / PB1XXX boards" - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB select HW_HAS_PCI select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK diff --git a/arch/mips/pic32/Kconfig b/arch/mips/pic32/Kconfig index 1985971b9890..527d37da05ac 100644 --- a/arch/mips/pic32/Kconfig +++ b/arch/mips/pic32/Kconfig @@ -14,7 +14,7 @@ config PIC32MZDA select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB select COMMON_CLK select CLKDEV_LOOKUP select LIBFDT