From: Kevin McKinney <klmckinney1@gmail.com>
Date: Sat, 26 May 2012 16:04:59 +0000 (-0400)
Subject: Staging: bcm: Remove condition check on macro REL_4_1 because it is not used.
X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=d0830f6c44050b78fde2fca8597d04064854cd87;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git

Staging: bcm: Remove condition check on macro REL_4_1 because it is not used.

This patch removes the conditional check on
macro REL_4_1, and the corresponding controlled
text because it is not used.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---

diff --git a/drivers/staging/bcm/Adapter.h b/drivers/staging/bcm/Adapter.h
index 1d18ef9dd35c..ade2b0d67974 100644
--- a/drivers/staging/bcm/Adapter.h
+++ b/drivers/staging/bcm/Adapter.h
@@ -251,87 +251,6 @@ typedef struct _PER_TARANG_DATA {
 	ULONG			RxCntrlMsgBitMask;
 } PER_TARANG_DATA, *PPER_TARANG_DATA;
 
-#ifdef REL_4_1
-typedef struct _TARGET_PARAMS {
-	B_UINT32 m_u32CfgVersion;
-
-	/* Scanning Related Params */
-	B_UINT32 m_u32CenterFrequency;
-	B_UINT32 m_u32BandAScan;
-	B_UINT32 m_u32BandBScan;
-	B_UINT32 m_u32BandCScan;
-
-	/* QoS Params */
-	B_UINT32 m_u32minGrantsize;	/* size of minimum grant is 0 or 6 */
-	B_UINT32 m_u32PHSEnable;
-
-	/* HO Params */
-	B_UINT32 m_u32HoEnable;
-	B_UINT32 m_u32HoReserved1;
-	B_UINT32 m_u32HoReserved2;
-
-	/* Power Control Params */
-	B_UINT32 m_u32MimoEnable;
-	B_UINT32 m_u32SecurityEnable;
-	/*
-	 * bit 1: 1 Idlemode enable;
-	 * bit 2: 1 Sleepmode Enable
-	 */
-	B_UINT32 m_u32PowerSavingModesEnable;
-	/* PowerSaving Mode Options:
-	 * bit 0 = 1: CPE mode - to keep pcmcia if alive;
-	 * bit 1 = 1: CINR reporing in Idlemode Msg
-	 * bit 2 = 1: Default PSC Enable in sleepmode
-	 */
-	B_UINT32 m_u32PowerSavingModeOptions;
-
-	B_UINT32 m_u32ArqEnable;
-
-	/* From Version #3, the HARQ section renamed as general */
-	B_UINT32 m_u32HarqEnable;
-	/* EEPROM Param Location */
-	B_UINT32 m_u32EEPROMFlag;
-	/* BINARY TYPE - 4th MSByte:
-	 * Interface Type -  3rd MSByte:
-	 * Vendor Type - 2nd MSByte
-	 */
-	/* Unused - LSByte */
-	B_UINT32 m_u32Customize;
-	B_UINT32 m_u32ConfigBW;  /* In Hz */
-	B_UINT32 m_u32ShutDownTimer;
-	B_UINT32 m_u32RadioParameter;
-	B_UINT32 m_u32PhyParameter1;
-	B_UINT32 m_u32PhyParameter2;
-	B_UINT32 m_u32PhyParameter3;
-
-	/* in eval mode only;
-	 * lower 16bits = basic cid for testing;
-	 * then bit 16 is test cqich,
-	 * bit 17  test init rang;
-	 * bit 18 test periodic rang
-	 * bit 19 is test harq ack/nack
-	 */
-	B_UINT32 m_u32TestOptions;
-	B_UINT32 m_u32MaxMACDataperDLFrame;
-	B_UINT32 m_u32MaxMACDataperULFrame;
-	B_UINT32 m_u32Corr2MacFlags;
-
-	/* adding driver params. */
-	B_UINT32 HostDrvrConfig1;
-	B_UINT32 HostDrvrConfig2;
-	B_UINT32 HostDrvrConfig3;
-	B_UINT32 HostDrvrConfig4;
-	B_UINT32 HostDrvrConfig5;
-	B_UINT32 HostDrvrConfig6;
-	B_UINT32 m_u32SegmentedPUSCenable;
-
-	/* BAMC enable - but 4.x does not support this feature
-	 * This is added just to sync 4.x and 5.x CFGs
-	 */
-	B_UINT32 m_u32BandAMCEnable;
-} STARGETPARAMS, *PSTARGETPARAMS;
-#endif
-
 struct bcm_targetdsx_buffer {
 	ULONG		ulTargetDsxBuffer;
 	B_UINT16	tid;
diff --git a/drivers/staging/bcm/Macros.h b/drivers/staging/bcm/Macros.h
index 46ed99c53764..8238cdba7a0f 100644
--- a/drivers/staging/bcm/Macros.h
+++ b/drivers/staging/bcm/Macros.h
@@ -252,11 +252,7 @@ typedef enum _E_PHS_DSC_ACTION {
 #define IDLE_MODE_WAKEUP_NOTIFIER_ADDRESS 0x1FC02FA8
 #define IDLE_MODE_MAX_RETRY_COUNT 1000
 
-#ifdef REL_4_1
-#define CONFIG_BEGIN_ADDR 0xBF60B004
-#else
 #define CONFIG_BEGIN_ADDR 0xBF60B000
-#endif
 
 #define FIRMWARE_BEGIN_ADDR 0xBFC00000