From: Stanislaw Gruszka Date: Fri, 5 Oct 2012 11:44:09 +0000 (+0200) Subject: rt2800: use BBP_R1 for setting tx power X-Git-Tag: MMI-PSA29.97-13-9~15401^2~17^2~332 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=cee2c7315f60beeff6137ee59e99acc77d636eeb;p=GitHub%2FMotorolaMobilityLLC%2Fkernel-slsi.git rt2800: use BBP_R1 for setting tx power TX power delta can be negative. TX_PWR_CFG_ registers allow to set delta only in range between 0 dBm and 15 dBm (4 bits for each rate). Se we need to use BBP_R1 to configure negative deltas. Not utilize +6 dBm increasing BBP_R1 option for safety reason. For now, this can be used for devices, which export maximum allowed TX power value. Signed-off-by: Stanislaw Gruszka Acked-by: Helmut Schaa Acked-by: Gertjan van Wingerde Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 01dc8891070c..934dd9d9d4dc 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -2570,13 +2570,10 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev, enum ieee80211_band band, int power_level) { - u8 txpower; + u8 txpower, r1; u16 eeprom; - int i, is_rate_b; - u32 reg; - u8 r1; - u32 offset; - int delta; + u32 reg, offset; + int i, is_rate_b, delta, power_ctrl; /* * Calculate HT40 compensation delta @@ -2589,10 +2586,24 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev, delta += rt2800_get_gain_calibration_delta(rt2x00dev); /* - * set to normal bbp tx power control mode: +/- 0dBm + * BBP_R1 controls TX power for all rates, it allow to set the following + * gains -12, -6, 0, +6 dBm by setting values 2, 1, 0, 3 respectively. + * + * TODO: we do not use +6 dBm option to do not increase power beyond + * regulatory limit, however this could be utilized for devices with + * CAPABILITY_POWER_LIMIT. */ rt2800_bbp_read(rt2x00dev, 1, &r1); - rt2x00_set_field8(&r1, BBP1_TX_POWER_CTRL, 0); + if (delta <= -12) { + power_ctrl = 2; + delta += 12; + } else if (delta <= -6) { + power_ctrl = 1; + delta += 6; + } else { + power_ctrl = 0; + } + rt2x00_set_field8(&r1, BBP1_TX_POWER_CTRL, power_ctrl); rt2800_bbp_write(rt2x00dev, 1, r1); offset = TX_PWR_CFG_0;