From: Jiri Slaby Date: Mon, 2 Apr 2012 11:54:35 +0000 (+0200) Subject: TTY: 68328serial, remove serial_state and friends X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=cea4b2ce4613feae878c0352b1d76f522faef511;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git TTY: 68328serial, remove serial_state and friends serial_state in 68328serial.h is a duplicated structure. One is defined in linux/serial.h. So let us use that instead. And since the serial flags are identical, use ones from there too. Signed-off-by: Jiri Slaby Cc: Geert Uytterhoeven Acked-by: Greg Ungerer Cc: linux-m68k@lists.linux-m68k.org Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c index 5ce782529d65..bf5f81113a0e 100644 --- a/drivers/tty/serial/68328serial.c +++ b/drivers/tty/serial/68328serial.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -79,18 +80,6 @@ struct m68k_serial *m68k_consinfo = 0; struct tty_driver *serial_driver; -/* number of characters left in xmit buffer before we ask for more */ -#define WAKEUP_CHARS 256 - -/* Debugging... DEBUG_INTR is bad to use when one of the zs - * lines is your console ;( - */ -#undef SERIAL_DEBUG_INTR -#undef SERIAL_DEBUG_OPEN -#undef SERIAL_DEBUG_FLOW - -#define RS_ISR_PASS_LIMIT 256 - static void change_speed(struct m68k_serial *info); /* @@ -363,7 +352,7 @@ static int startup(struct m68k_serial * info) m68328_uart *uart = &uart_addr[info->line]; unsigned long flags; - if (info->flags & S_INITIALIZED) + if (info->flags & ASYNC_INITIALIZED) return 0; if (!info->xmit_buf) { @@ -404,7 +393,7 @@ static int startup(struct m68k_serial * info) change_speed(info); - info->flags |= S_INITIALIZED; + info->flags |= ASYNC_INITIALIZED; local_irq_restore(flags); return 0; } @@ -419,7 +408,7 @@ static void shutdown(struct m68k_serial * info) unsigned long flags; uart->ustcnt = 0; /* All off! */ - if (!(info->flags & S_INITIALIZED)) + if (!(info->flags & ASYNC_INITIALIZED)) return; local_irq_save(flags); @@ -432,7 +421,7 @@ static void shutdown(struct m68k_serial * info) if (info->tty) set_bit(TTY_IO_ERROR, &info->tty->flags); - info->flags &= ~S_INITIALIZED; + info->flags &= ~ASYNC_INITIALIZED; local_irq_restore(flags); } @@ -835,11 +824,11 @@ static int set_serial_info(struct m68k_serial * info, if ((new_serial.baud_base != info->baud_base) || (new_serial.type != info->type) || (new_serial.close_delay != info->close_delay) || - ((new_serial.flags & ~S_USR_MASK) != - (info->flags & ~S_USR_MASK))) + ((new_serial.flags & ~ASYNC_USR_MASK) != + (info->flags & ~ASYNC_USR_MASK))) return -EPERM; - info->flags = ((info->flags & ~S_USR_MASK) | - (new_serial.flags & S_USR_MASK)); + info->flags = ((info->flags & ~ASYNC_USR_MASK) | + (new_serial.flags & ASYNC_USR_MASK)); info->custom_divisor = new_serial.custom_divisor; goto check_and_exit; } @@ -853,8 +842,8 @@ static int set_serial_info(struct m68k_serial * info, */ info->baud_base = new_serial.baud_base; - info->flags = ((info->flags & ~S_FLAGS) | - (new_serial.flags & S_FLAGS)); + info->flags = ((info->flags & ~ASYNC_FLAGS) | + (new_serial.flags & ASYNC_FLAGS)); info->type = new_serial.type; info->close_delay = new_serial.close_delay; info->closing_wait = new_serial.closing_wait; @@ -1022,13 +1011,13 @@ static void rs_close(struct tty_struct *tty, struct file * filp) local_irq_restore(flags); return; } - info->flags |= S_CLOSING; + info->flags |= ASYNC_CLOSING; /* * Now we wait for the transmit buffer to clear; and we notify * the line discipline to only process XON/XOFF characters. */ tty->closing = 1; - if (info->closing_wait != S_CLOSING_WAIT_NONE) + if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) tty_wait_until_sent(tty, info->closing_wait); /* * At this point we stop accepting input. To do this, we @@ -1064,7 +1053,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp) } wake_up_interruptible(&info->open_wait); } - info->flags &= ~(S_NORMAL_ACTIVE|S_CLOSING); + info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); wake_up_interruptible(&info->close_wait); local_irq_restore(flags); } @@ -1083,7 +1072,7 @@ void rs_hangup(struct tty_struct *tty) shutdown(info); info->event = 0; info->count = 0; - info->flags &= ~S_NORMAL_ACTIVE; + info->flags &= ~ASYNC_NORMAL_ACTIVE; info->tty = NULL; wake_up_interruptible(&info->open_wait); } @@ -1104,10 +1093,10 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, * If the device is in the middle of being closed, then block * until it's done, and then try again. */ - if (info->flags & S_CLOSING) { + if (info->flags & ASYNC_CLOSING) { interruptible_sleep_on(&info->close_wait); #ifdef SERIAL_DO_RESTART - if (info->flags & S_HUP_NOTIFY) + if (info->flags & ASYNC_HUP_NOTIFY) return -EAGAIN; else return -ERESTARTSYS; @@ -1122,7 +1111,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, */ if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) { - info->flags |= S_NORMAL_ACTIVE; + info->flags |= ASYNC_NORMAL_ACTIVE; return 0; } @@ -1147,9 +1136,9 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, local_irq_enable(); current->state = TASK_INTERRUPTIBLE; if (tty_hung_up_p(filp) || - !(info->flags & S_INITIALIZED)) { + !(info->flags & ASYNC_INITIALIZED)) { #ifdef SERIAL_DO_RESTART - if (info->flags & S_HUP_NOTIFY) + if (info->flags & ASYNC_HUP_NOTIFY) retval = -EAGAIN; else retval = -ERESTARTSYS; @@ -1158,7 +1147,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, #endif break; } - if (!(info->flags & S_CLOSING) && do_clocal) + if (!(info->flags & ASYNC_CLOSING) && do_clocal) break; if (signal_pending(current)) { retval = -ERESTARTSYS; @@ -1176,7 +1165,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, if (retval) return retval; - info->flags |= S_NORMAL_ACTIVE; + info->flags |= ASYNC_NORMAL_ACTIVE; return 0; } diff --git a/drivers/tty/serial/68328serial.h b/drivers/tty/serial/68328serial.h index 3d2faabd766f..a804ea56a0b5 100644 --- a/drivers/tty/serial/68328serial.h +++ b/drivers/tty/serial/68328serial.h @@ -11,69 +11,6 @@ #ifndef _MC683XX_SERIAL_H #define _MC683XX_SERIAL_H - -struct serial_struct { - int type; - int line; - int port; - int irq; - int flags; - int xmit_fifo_size; - int custom_divisor; - int baud_base; - unsigned short close_delay; - char reserved_char[2]; - int hub6; /* FIXME: We don't have AT&T Hub6 boards! */ - unsigned short closing_wait; /* time to wait before closing */ - unsigned short closing_wait2; /* no longer used... */ - int reserved[4]; -}; - -/* - * For the close wait times, 0 means wait forever for serial port to - * flush its output. 65535 means don't wait at all. - */ -#define S_CLOSING_WAIT_INF 0 -#define S_CLOSING_WAIT_NONE 65535 - -/* - * Definitions for S_struct (and serial_struct) flags field - */ -#define S_HUP_NOTIFY 0x0001 /* Notify getty on hangups and closes - on the callout port */ -#define S_FOURPORT 0x0002 /* Set OU1, OUT2 per AST Fourport settings */ -#define S_SAK 0x0004 /* Secure Attention Key (Orange book) */ -#define S_SPLIT_TERMIOS 0x0008 /* Separate termios for dialin/callout */ - -#define S_SPD_MASK 0x0030 -#define S_SPD_HI 0x0010 /* Use 56000 instead of 38400 bps */ - -#define S_SPD_VHI 0x0020 /* Use 115200 instead of 38400 bps */ -#define S_SPD_CUST 0x0030 /* Use user-specified divisor */ - -#define S_SKIP_TEST 0x0040 /* Skip UART test during autoconfiguration */ -#define S_AUTO_IRQ 0x0080 /* Do automatic IRQ during autoconfiguration */ -#define S_SESSION_LOCKOUT 0x0100 /* Lock out cua opens based on session */ -#define S_PGRP_LOCKOUT 0x0200 /* Lock out cua opens based on pgrp */ -#define S_CALLOUT_NOHUP 0x0400 /* Don't do hangups for cua device */ - -#define S_FLAGS 0x0FFF /* Possible legal S flags */ -#define S_USR_MASK 0x0430 /* Legal flags that non-privileged - * users can set or reset */ - -/* Internal flags used only by kernel/chr_drv/serial.c */ -#define S_INITIALIZED 0x80000000 /* Serial port was initialized */ -#define S_CALLOUT_ACTIVE 0x40000000 /* Call out device is active */ -#define S_NORMAL_ACTIVE 0x20000000 /* Normal device is active */ -#define S_BOOT_AUTOCONF 0x10000000 /* Autoconfigure port on bootup */ -#define S_CLOSING 0x08000000 /* Serial port is closing */ -#define S_CTS_FLOW 0x04000000 /* Do CTS flow control */ -#define S_CHECK_CD 0x02000000 /* i.e., CLOCAL */ - -/* Software state per channel */ - -#ifdef __KERNEL__ - /* * I believe this is the optimal setting that reduces the number of interrupts. * At high speeds the output might become a little "bursted" (use USTCNT_TXHE @@ -162,25 +99,12 @@ struct m68k_serial { wait_queue_head_t close_wait; }; - #define SERIAL_MAGIC 0x5301 -/* - * The size of the serial xmit buffer is 1 page, or 4096 bytes - */ -#define SERIAL_XMIT_SIZE 4096 - -/* - * Events are used to schedule things to happen at timer-interrupt - * time, instead of at rs interrupt time. - */ -#define RS_EVENT_WRITE_WAKEUP 0 - /* * Define the number of ports supported and their irqs. */ #define NR_PORTS 1 #define UART_IRQ_DEFNS {UART_IRQ_NUM} -#endif /* __KERNEL__ */ #endif /* !(_MC683XX_SERIAL_H) */