From: françois romieu Date: Thu, 20 Jan 2011 04:59:23 +0000 (+0000) Subject: atl1e: remove private #define. X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=ccd5c8ef24590bd0e1277ae6f6c0b7790afd371d;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git atl1e: remove private #define. Either unused or duplicates from mii.h. Signed-off-by: Francois Romieu Cc: Jay Cliburn Cc: Chris Snook Cc: Jie Yang Signed-off-by: David S. Miller --- diff --git a/drivers/net/atl1e/atl1e_ethtool.c b/drivers/net/atl1e/atl1e_ethtool.c index 6943a6c3b948..1209297433b8 100644 --- a/drivers/net/atl1e/atl1e_ethtool.c +++ b/drivers/net/atl1e/atl1e_ethtool.c @@ -95,18 +95,18 @@ static int atl1e_set_settings(struct net_device *netdev, ecmd->advertising = hw->autoneg_advertised | ADVERTISED_TP | ADVERTISED_Autoneg; - adv4 = hw->mii_autoneg_adv_reg & ~MII_AR_SPEED_MASK; + adv4 = hw->mii_autoneg_adv_reg & ~ADVERTISE_ALL; adv9 = hw->mii_1000t_ctrl_reg & ~MII_AT001_CR_1000T_SPEED_MASK; if (hw->autoneg_advertised & ADVERTISE_10_HALF) - adv4 |= MII_AR_10T_HD_CAPS; + adv4 |= ADVERTISE_10HALF; if (hw->autoneg_advertised & ADVERTISE_10_FULL) - adv4 |= MII_AR_10T_FD_CAPS; + adv4 |= ADVERTISE_10FULL; if (hw->autoneg_advertised & ADVERTISE_100_HALF) - adv4 |= MII_AR_100TX_HD_CAPS; + adv4 |= ADVERTISE_100HALF; if (hw->autoneg_advertised & ADVERTISE_100_FULL) - adv4 |= MII_AR_100TX_FD_CAPS; + adv4 |= ADVERTISE_100FULL; if (hw->autoneg_advertised & ADVERTISE_1000_FULL) - adv9 |= MII_AT001_CR_1000T_FD_CAPS; + adv9 |= ADVERTISE_1000FULL; if (adv4 != hw->mii_autoneg_adv_reg || adv9 != hw->mii_1000t_ctrl_reg) { diff --git a/drivers/net/atl1e/atl1e_hw.c b/drivers/net/atl1e/atl1e_hw.c index 76cc043def8c..923063d2e5bb 100644 --- a/drivers/net/atl1e/atl1e_hw.c +++ b/drivers/net/atl1e/atl1e_hw.c @@ -318,7 +318,7 @@ static int atl1e_phy_setup_autoneg_adv(struct atl1e_hw *hw) * Advertisement Register (Address 4) and the 1000 mb speed bits in * the 1000Base-T control Register (Address 9). */ - mii_autoneg_adv_reg &= ~MII_AR_SPEED_MASK; + mii_autoneg_adv_reg &= ~ADVERTISE_ALL; mii_1000t_ctrl_reg &= ~MII_AT001_CR_1000T_SPEED_MASK; /* @@ -327,44 +327,37 @@ static int atl1e_phy_setup_autoneg_adv(struct atl1e_hw *hw) */ switch (hw->media_type) { case MEDIA_TYPE_AUTO_SENSOR: - mii_autoneg_adv_reg |= (MII_AR_10T_HD_CAPS | - MII_AR_10T_FD_CAPS | - MII_AR_100TX_HD_CAPS | - MII_AR_100TX_FD_CAPS); - hw->autoneg_advertised = ADVERTISE_10_HALF | - ADVERTISE_10_FULL | - ADVERTISE_100_HALF | - ADVERTISE_100_FULL; + mii_autoneg_adv_reg |= ADVERTISE_ALL; + hw->autoneg_advertised = ADVERTISE_ALL; if (hw->nic_type == athr_l1e) { - mii_1000t_ctrl_reg |= - MII_AT001_CR_1000T_FD_CAPS; + mii_1000t_ctrl_reg |= ADVERTISE_1000FULL; hw->autoneg_advertised |= ADVERTISE_1000_FULL; } break; case MEDIA_TYPE_100M_FULL: - mii_autoneg_adv_reg |= MII_AR_100TX_FD_CAPS; + mii_autoneg_adv_reg |= ADVERTISE_100FULL; hw->autoneg_advertised = ADVERTISE_100_FULL; break; case MEDIA_TYPE_100M_HALF: - mii_autoneg_adv_reg |= MII_AR_100TX_HD_CAPS; + mii_autoneg_adv_reg |= ADVERTISE_100_HALF; hw->autoneg_advertised = ADVERTISE_100_HALF; break; case MEDIA_TYPE_10M_FULL: - mii_autoneg_adv_reg |= MII_AR_10T_FD_CAPS; + mii_autoneg_adv_reg |= ADVERTISE_10_FULL; hw->autoneg_advertised = ADVERTISE_10_FULL; break; default: - mii_autoneg_adv_reg |= MII_AR_10T_HD_CAPS; + mii_autoneg_adv_reg |= ADVERTISE_10_HALF; hw->autoneg_advertised = ADVERTISE_10_HALF; break; } /* flow control fixed to enable all */ - mii_autoneg_adv_reg |= (MII_AR_ASM_DIR | MII_AR_PAUSE); + mii_autoneg_adv_reg |= (ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP); hw->mii_autoneg_adv_reg = mii_autoneg_adv_reg; hw->mii_1000t_ctrl_reg = mii_1000t_ctrl_reg; @@ -374,7 +367,7 @@ static int atl1e_phy_setup_autoneg_adv(struct atl1e_hw *hw) return ret_val; if (hw->nic_type == athr_l1e || hw->nic_type == athr_l2e_revA) { - ret_val = atl1e_write_phy_reg(hw, MII_AT001_CR, + ret_val = atl1e_write_phy_reg(hw, MII_CTRL1000, mii_1000t_ctrl_reg); if (ret_val) return ret_val; @@ -397,7 +390,7 @@ int atl1e_phy_commit(struct atl1e_hw *hw) int ret_val; u16 phy_data; - phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG; + phy_data = BMCR_RESET | BMCR_ANENABLE | BMCR_ANRESTART; ret_val = atl1e_write_phy_reg(hw, MII_BMCR, phy_data); if (ret_val) { @@ -645,15 +638,14 @@ int atl1e_restart_autoneg(struct atl1e_hw *hw) return err; if (hw->nic_type == athr_l1e || hw->nic_type == athr_l2e_revA) { - err = atl1e_write_phy_reg(hw, MII_AT001_CR, + err = atl1e_write_phy_reg(hw, MII_CTRL1000, hw->mii_1000t_ctrl_reg); if (err) return err; } err = atl1e_write_phy_reg(hw, MII_BMCR, - MII_CR_RESET | MII_CR_AUTO_NEG_EN | - MII_CR_RESTART_AUTO_NEG); + BMCR_RESET | BMCR_ANENABLE | BMCR_ANRESTART); return err; } diff --git a/drivers/net/atl1e/atl1e_hw.h b/drivers/net/atl1e/atl1e_hw.h index 5ea2f4d86cfa..74df16aef793 100644 --- a/drivers/net/atl1e/atl1e_hw.h +++ b/drivers/net/atl1e/atl1e_hw.h @@ -629,127 +629,24 @@ s32 atl1e_restart_autoneg(struct atl1e_hw *hw); /***************************** MII definition ***************************************/ /* PHY Common Register */ -#define MII_BMCR 0x00 -#define MII_BMSR 0x01 -#define MII_PHYSID1 0x02 -#define MII_PHYSID2 0x03 -#define MII_ADVERTISE 0x04 -#define MII_LPA 0x05 -#define MII_EXPANSION 0x06 -#define MII_AT001_CR 0x09 -#define MII_AT001_SR 0x0A -#define MII_AT001_ESR 0x0F #define MII_AT001_PSCR 0x10 #define MII_AT001_PSSR 0x11 #define MII_INT_CTRL 0x12 #define MII_INT_STATUS 0x13 #define MII_SMARTSPEED 0x14 -#define MII_RERRCOUNTER 0x15 -#define MII_SREVISION 0x16 -#define MII_RESV1 0x17 #define MII_LBRERROR 0x18 -#define MII_PHYADDR 0x19 #define MII_RESV2 0x1a -#define MII_TPISTATUS 0x1b -#define MII_NCONFIG 0x1c #define MII_DBG_ADDR 0x1D #define MII_DBG_DATA 0x1E - -/* PHY Control Register */ -#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */ -#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */ -#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ -#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ -#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */ -#define MII_CR_POWER_DOWN 0x0800 /* Power down */ -#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ -#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */ -#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ -#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ -#define MII_CR_SPEED_MASK 0x2040 -#define MII_CR_SPEED_1000 0x0040 -#define MII_CR_SPEED_100 0x2000 -#define MII_CR_SPEED_10 0x0000 - - -/* PHY Status Register */ -#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */ -#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */ -#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */ -#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */ -#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */ -#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */ -#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */ -#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */ -#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */ -#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */ -#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */ -#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */ -#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */ -#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */ -#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */ - -/* Link partner ability register. */ -#define MII_LPA_SLCT 0x001f /* Same as advertise selector */ -#define MII_LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */ -#define MII_LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */ -#define MII_LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */ -#define MII_LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */ -#define MII_LPA_100BASE4 0x0200 /* 100BASE-T4 */ -#define MII_LPA_PAUSE 0x0400 /* PAUSE */ -#define MII_LPA_ASYPAUSE 0x0800 /* Asymmetrical PAUSE */ -#define MII_LPA_RFAULT 0x2000 /* Link partner faulted */ -#define MII_LPA_LPACK 0x4000 /* Link partner acked us */ -#define MII_LPA_NPAGE 0x8000 /* Next page bit */ - /* Autoneg Advertisement Register */ -#define MII_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */ -#define MII_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */ -#define MII_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */ -#define MII_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */ -#define MII_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */ -#define MII_AR_100T4_CAPS 0x0200 /* 100T4 Capable */ -#define MII_AR_PAUSE 0x0400 /* Pause operation desired */ -#define MII_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */ -#define MII_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */ -#define MII_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */ -#define MII_AR_SPEED_MASK 0x01E0 -#define MII_AR_DEFAULT_CAP_MASK 0x0DE0 +#define MII_AR_DEFAULT_CAP_MASK 0 /* 1000BASE-T Control Register */ -#define MII_AT001_CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */ -#define MII_AT001_CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */ -#define MII_AT001_CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port */ -/* 0=DTE device */ -#define MII_AT001_CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */ -/* 0=Configure PHY as Slave */ -#define MII_AT001_CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */ -/* 0=Automatic Master/Slave config */ -#define MII_AT001_CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */ -#define MII_AT001_CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */ -#define MII_AT001_CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */ -#define MII_AT001_CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */ -#define MII_AT001_CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */ -#define MII_AT001_CR_1000T_SPEED_MASK 0x0300 -#define MII_AT001_CR_1000T_DEFAULT_CAP_MASK 0x0300 - -/* 1000BASE-T Status Register */ -#define MII_AT001_SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */ -#define MII_AT001_SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */ -#define MII_AT001_SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */ -#define MII_AT001_SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */ -#define MII_AT001_SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master, 0=Slave */ -#define MII_AT001_SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */ -#define MII_AT001_SR_1000T_REMOTE_RX_STATUS_SHIFT 12 -#define MII_AT001_SR_1000T_LOCAL_RX_STATUS_SHIFT 13 - -/* Extended Status Register */ -#define MII_AT001_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */ -#define MII_AT001_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */ -#define MII_AT001_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */ -#define MII_AT001_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */ +#define MII_AT001_CR_1000T_SPEED_MASK \ + (ADVERTISE_1000FULL | ADVERTISE_1000HALF) +#define MII_AT001_CR_1000T_DEFAULT_CAP_MASK MII_AT001_CR_1000T_SPEED_MASK /* AT001 PHY Specific Control Register */ #define MII_AT001_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */ diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/atl1e/atl1e_main.c index e28f8baf394e..bf7500ccd73f 100644 --- a/drivers/net/atl1e/atl1e_main.c +++ b/drivers/net/atl1e/atl1e_main.c @@ -2051,9 +2051,9 @@ static int atl1e_suspend(struct pci_dev *pdev, pm_message_t state) atl1e_read_phy_reg(hw, MII_BMSR, (u16 *)&mii_bmsr_data); atl1e_read_phy_reg(hw, MII_BMSR, (u16 *)&mii_bmsr_data); - mii_advertise_data = MII_AR_10T_HD_CAPS; + mii_advertise_data = ADVERTISE_10HALF; - if ((atl1e_write_phy_reg(hw, MII_AT001_CR, 0) != 0) || + if ((atl1e_write_phy_reg(hw, MII_CTRL1000, 0) != 0) || (atl1e_write_phy_reg(hw, MII_ADVERTISE, mii_advertise_data) != 0) || (atl1e_phy_commit(hw)) != 0) {