From: Paul Mackerras Date: Mon, 30 Jan 2017 10:21:36 +0000 (+1100) Subject: powerpc/64: Enable use of radix MMU under hypervisor on POWER9 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=cc3d2940133d24000e2866b21e03ce32adfead0a;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git powerpc/64: Enable use of radix MMU under hypervisor on POWER9 To use radix as a guest, we first need to tell the hypervisor via the ibm,client-architecture call first that we support POWER9 and architecture v3.00, and that we can do either radix or hash and that we would like to choose later using an hcall (the H_REGISTER_PROC_TBL hcall). Then we need to check whether the hypervisor agreed to us using radix. We need to do this very early on in the kernel boot process before any of the MMU initialization is done. If the hypervisor doesn't agree, we can't use radix and therefore clear the radix MMU feature bit. Later, when we have set up our process table, which points to the radix tree for each process, we need to install that using the H_REGISTER_PROC_TBL hcall. Signed-off-by: Paul Mackerras Signed-off-by: Michael Ellerman --- diff --git a/arch/powerpc/include/asm/book3s/64/mmu.h b/arch/powerpc/include/asm/book3s/64/mmu.h index 8afb0e00f7d9..cea522c3bcae 100644 --- a/arch/powerpc/include/asm/book3s/64/mmu.h +++ b/arch/powerpc/include/asm/book3s/64/mmu.h @@ -138,5 +138,11 @@ static inline void setup_initial_memory_limit(phys_addr_t first_memblock_base, extern int (*register_process_table)(unsigned long base, unsigned long page_size, unsigned long tbl_size); +#ifdef CONFIG_PPC_PSERIES +extern void radix_init_pseries(void); +#else +static inline void radix_init_pseries(void) { }; +#endif + #endif /* __ASSEMBLY__ */ #endif /* _ASM_POWERPC_BOOK3S_64_MMU_H_ */ diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h index 77ff1ba99d1f..54d11b3a6bf7 100644 --- a/arch/powerpc/include/asm/hvcall.h +++ b/arch/powerpc/include/asm/hvcall.h @@ -276,6 +276,7 @@ #define H_GET_MPP_X 0x314 #define H_SET_MODE 0x31C #define H_CLEAR_HPT 0x358 +#define H_REGISTER_PROC_TBL 0x37C #define H_SIGNAL_SYS_RESET 0x380 #define MAX_HCALL_OPCODE H_SIGNAL_SYS_RESET @@ -313,6 +314,16 @@ #define H_SIGNAL_SYS_RESET_ALL_OTHERS -2 /* >= 0 values are CPU number */ +/* Flag values used in H_REGISTER_PROC_TBL hcall */ +#define PROC_TABLE_OP_MASK 0x18 +#define PROC_TABLE_DEREG 0x10 +#define PROC_TABLE_NEW 0x18 +#define PROC_TABLE_TYPE_MASK 0x06 +#define PROC_TABLE_HPT_SLB 0x00 +#define PROC_TABLE_HPT_PT 0x02 +#define PROC_TABLE_RADIX 0x04 +#define PROC_TABLE_GTSE 0x01 + #ifndef __ASSEMBLY__ /** diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h index e6d83d0fada7..8af2546ea593 100644 --- a/arch/powerpc/include/asm/prom.h +++ b/arch/powerpc/include/asm/prom.h @@ -121,6 +121,8 @@ struct of_drconf_cell { #define OV1_PPC_2_06 0x02 /* set if we support PowerPC 2.06 */ #define OV1_PPC_2_07 0x01 /* set if we support PowerPC 2.07 */ +#define OV1_PPC_3_00 0x80 /* set if we support PowerPC 3.00 */ + /* Option vector 2: Open Firmware options supported */ #define OV2_REAL_MODE 0x20 /* set if we want OF in real mode */ @@ -155,6 +157,13 @@ struct of_drconf_cell { #define OV5_PFO_HW_842 0x1140 /* PFO Compression Accelerator */ #define OV5_PFO_HW_ENCR 0x1120 /* PFO Encryption Accelerator */ #define OV5_SUB_PROCESSORS 0x1501 /* 1,2,or 4 Sub-Processors supported */ +#define OV5_XIVE_EXPLOIT 0x1701 /* XIVE exploitation supported */ +#define OV5_MMU_RADIX_300 0x1880 /* ISA v3.00 radix MMU supported */ +#define OV5_MMU_HASH_300 0x1840 /* ISA v3.00 hash MMU supported */ +#define OV5_MMU_SEGM_RADIX 0x1820 /* radix mode (no segmentation) */ +#define OV5_MMU_PROC_TBL 0x1810 /* hcall selects SLB or proc table */ +#define OV5_MMU_SLB 0x1800 /* always use SLB */ +#define OV5_MMU_GTSE 0x1808 /* Guest translation shootdown */ /* Option Vector 6: IBM PAPR hints */ #define OV6_LINUX 0x02 /* Linux is our OS */ diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index ec47a939cbdd..358d43f8f84f 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -649,6 +649,7 @@ static void __init early_cmdline_parse(void) struct option_vector1 { u8 byte1; u8 arch_versions; + u8 arch_versions3; } __packed; struct option_vector2 { @@ -691,6 +692,9 @@ struct option_vector5 { u8 reserved2; __be16 reserved3; u8 subprocessors; + u8 byte22; + u8 intarch; + u8 mmu; } __packed; struct option_vector6 { @@ -700,7 +704,7 @@ struct option_vector6 { } __packed; struct ibm_arch_vec { - struct { u32 mask, val; } pvrs[10]; + struct { u32 mask, val; } pvrs[12]; u8 num_vectors; @@ -749,6 +753,14 @@ struct ibm_arch_vec __cacheline_aligned ibm_architecture_vec = { .mask = cpu_to_be32(0xffff0000), /* POWER8 */ .val = cpu_to_be32(0x004d0000), }, + { + .mask = cpu_to_be32(0xffff0000), /* POWER9 */ + .val = cpu_to_be32(0x004e0000), + }, + { + .mask = cpu_to_be32(0xffffffff), /* all 3.00-compliant */ + .val = cpu_to_be32(0x0f000005), + }, { .mask = cpu_to_be32(0xffffffff), /* all 2.07-compliant */ .val = cpu_to_be32(0x0f000004), @@ -774,6 +786,7 @@ struct ibm_arch_vec __cacheline_aligned ibm_architecture_vec = { .byte1 = 0, .arch_versions = OV1_PPC_2_00 | OV1_PPC_2_01 | OV1_PPC_2_02 | OV1_PPC_2_03 | OV1_PPC_2_04 | OV1_PPC_2_05 | OV1_PPC_2_06 | OV1_PPC_2_07, + .arch_versions3 = OV1_PPC_3_00, }, .vec2_len = VECTOR_LENGTH(sizeof(struct option_vector2)), @@ -836,6 +849,9 @@ struct ibm_arch_vec __cacheline_aligned ibm_architecture_vec = { .reserved2 = 0, .reserved3 = 0, .subprocessors = 1, + .intarch = 0, + .mmu = OV5_FEAT(OV5_MMU_RADIX_300) | OV5_FEAT(OV5_MMU_HASH_300) | + OV5_FEAT(OV5_MMU_PROC_TBL) | OV5_FEAT(OV5_MMU_GTSE), }, /* option vector 6: IBM PAPR hints */ diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index 4d9481ec2468..10c9a545a646 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -347,10 +347,9 @@ static int __init parse_disable_radix(char *p) early_param("disable_radix", parse_disable_radix); /* - * If we're running under a hypervisor, we currently can't do radix - * since we don't have the code to do the H_REGISTER_PROC_TBL hcall. - * We tell that we're running under a hypervisor by looking for the - * /chosen/ibm,architecture-vec-5 property. + * If we're running under a hypervisor, we need to check the contents of + * /chosen/ibm,architecture-vec-5 to see if the hypervisor is willing to do + * radix. If not, we clear the radix feature bit so we fall back to hash. */ static void early_check_vec5(void) { @@ -365,7 +364,10 @@ static void early_check_vec5(void) vec5 = of_get_flat_dt_prop(chosen, "ibm,architecture-vec-5", &size); if (!vec5) return; - cur_cpu_spec->mmu_features &= ~MMU_FTR_TYPE_RADIX; + if (size <= OV5_INDX(OV5_MMU_RADIX_300) || + !(vec5[OV5_INDX(OV5_MMU_RADIX_300)] & OV5_FEAT(OV5_MMU_RADIX_300))) + /* Hypervisor doesn't support radix */ + cur_cpu_spec->mmu_features &= ~MMU_FTR_TYPE_RADIX; } void __init mmu_early_init_devtree(void) diff --git a/arch/powerpc/mm/pgtable-radix.c b/arch/powerpc/mm/pgtable-radix.c index cfa53ccc8baf..94323c4ececc 100644 --- a/arch/powerpc/mm/pgtable-radix.c +++ b/arch/powerpc/mm/pgtable-radix.c @@ -401,6 +401,8 @@ void __init radix__early_init_mmu(void) mtspr(SPRN_LPCR, lpcr | LPCR_UPRT | LPCR_HR); radix_init_partition_table(); radix_init_amor(); + } else { + radix_init_pseries(); } memblock_set_current_limit(MEMBLOCK_ALLOC_ANYWHERE); diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index 5dc1c3c6e716..0587655aea69 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -609,6 +609,29 @@ static int __init disable_bulk_remove(char *str) __setup("bulk_remove=", disable_bulk_remove); +/* Actually only used for radix, so far */ +static int pseries_lpar_register_process_table(unsigned long base, + unsigned long page_size, unsigned long table_size) +{ + long rc; + unsigned long flags = PROC_TABLE_NEW; + + if (radix_enabled()) + flags |= PROC_TABLE_RADIX | PROC_TABLE_GTSE; + for (;;) { + rc = plpar_hcall_norets(H_REGISTER_PROC_TBL, flags, base, + page_size, table_size); + if (!H_IS_LONG_BUSY(rc)) + break; + mdelay(get_longbusy_msecs(rc)); + } + if (rc != H_SUCCESS) { + pr_err("Failed to register process table (rc=%ld)\n", rc); + BUG(); + } + return rc; +} + void __init hpte_init_pseries(void) { mmu_hash_ops.hpte_invalidate = pSeries_lpar_hpte_invalidate; @@ -622,6 +645,12 @@ void __init hpte_init_pseries(void) mmu_hash_ops.hugepage_invalidate = pSeries_lpar_hugepage_invalidate; } +void radix_init_pseries(void) +{ + pr_info("Using radix MMU under hypervisor\n"); + register_process_table = pseries_lpar_register_process_table; +} + #ifdef CONFIG_PPC_SMLPAR #define CMO_FREE_HINT_DEFAULT 1 static int cmo_free_hint_flag = CMO_FREE_HINT_DEFAULT;