From: Richard woodruff Date: Wed, 16 Feb 2011 04:54:16 +0000 (+0530) Subject: i2c-omap: Double clear of ARDY status in IRQ handler X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=cb527ede1bf6ff2008a025606f25344b8ed7b4ac;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git i2c-omap: Double clear of ARDY status in IRQ handler This errata occurs when the ARDY interrupt generation is enabled. At the begining of every new transaction the ARDY interrupt is cleared. On continuous i2c transactions where after clearing the ARDY bit from I2C_STAT register (clearing the interrupt), the IRQ line is reasserted and the I2C_STAT[ARDY] bit set again on 1. In fact, the ARDY status bit is not cleared at the write access to I2C_STAT[ARDY] and only the IRQ line is deasserted and then reasserted. This is not captured in the usual errata documents. The workaround is to have a double clear of ARDY status in irq handler. Signed-off-by: Richard woodruff Signed-off-by: Keerthy Signed-off-by: Ben Dooks --- diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index adc1ee53b1a1..e3f925ac1c39 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -847,11 +847,15 @@ complete: dev_err(dev->dev, "Arbitration lost\n"); err |= OMAP_I2C_STAT_AL; } + /* + * ProDB0017052: Clear ARDY bit twice + */ if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) { omap_i2c_ack_stat(dev, stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR | - OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR)); + OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR | + OMAP_I2C_STAT_ARDY)); omap_i2c_complete_cmd(dev, err); return IRQ_HANDLED; }