From: Joe Perches Date: Tue, 5 May 2015 17:05:47 +0000 (-0700) Subject: arcnet: Use normal kernel spacing style X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=cb334648a10c7fa6f0f163c22602f4dc1c6d56b4;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git arcnet: Use normal kernel spacing style Standardized spacing is easier to read. git diff -w shows no differences. objdiff shows no differences. Signed-off-by: Joe Perches Signed-off-by: Michael Grzeschik --- diff --git a/drivers/net/arcnet/arc-rawmode.c b/drivers/net/arcnet/arc-rawmode.c index 705e6ce2eb90..49f5819a0367 100644 --- a/drivers/net/arcnet/arc-rawmode.c +++ b/drivers/net/arcnet/arc-rawmode.c @@ -1,6 +1,6 @@ /* * Linux ARCnet driver - "raw mode" packet encapsulation (no soft headers) - * + * * Written 1994-1999 by Avery Pennarun. * Derived from skeleton.c by Donald Becker. * @@ -109,7 +109,7 @@ static void rx(struct net_device *dev, int bufnum, skb_put(skb, length + ARC_HDR_SIZE); skb->dev = dev; - pkt = (struct archdr *) skb->data; + pkt = (struct archdr *)skb->data; skb_reset_mac_header(skb); skb_pull(skb, ARC_HDR_SIZE); @@ -136,7 +136,7 @@ static int build_header(struct sk_buff *skb, struct net_device *dev, unsigned short type, uint8_t daddr) { int hdr_size = ARC_HDR_SIZE; - struct archdr *pkt = (struct archdr *) skb_push(skb, hdr_size); + struct archdr *pkt = (struct archdr *)skb_push(skb, hdr_size); /* * Set the source hardware address. @@ -150,7 +150,7 @@ static int build_header(struct sk_buff *skb, struct net_device *dev, /* see linux/net/ethernet/eth.c to see where I got the following */ if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) { - /* + /* * FIXME: fill in the last byte of the dest ipaddr here to better * comply with RFC1051 in "noarp" mode. */ @@ -192,7 +192,7 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, hard->offset[0] = ofs = 256 - length; BUGMSG(D_DURING, "prepare_tx: length=%d ofs=%d\n", - length,ofs); + length, ofs); lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE); lp->hw.copy_to_card(dev, bufnum, ofs, &pkt->soft, length); diff --git a/drivers/net/arcnet/arc-rimi.c b/drivers/net/arcnet/arc-rimi.c index b8b4c7ba884f..4644d46b6a5f 100644 --- a/drivers/net/arcnet/arc-rimi.c +++ b/drivers/net/arcnet/arc-rimi.c @@ -1,6 +1,6 @@ /* * Linux ARCnet driver - "RIM I" (entirely mem-mapped) cards - * + * * Written 1994-1999 by Avery Pennarun. * Written 1999-2000 by Martin Mares . * Derived from skeleton.c by Donald Becker. @@ -56,27 +56,27 @@ static void arcrimi_copy_from_card(struct net_device *dev, int bufnum, int offse /* Handy defines for ARCnet specific stuff */ /* Amount of I/O memory used by the card */ -#define BUFFER_SIZE (512) -#define MIRROR_SIZE (BUFFER_SIZE*4) +#define BUFFER_SIZE (512) +#define MIRROR_SIZE (BUFFER_SIZE * 4) /* COM 9026 controller chip --> ARCnet register addresses */ -#define _INTMASK (ioaddr+0) /* writable */ -#define _STATUS (ioaddr+0) /* readable */ -#define _COMMAND (ioaddr+1) /* writable, returns random vals on read (?) */ -#define _RESET (ioaddr+8) /* software reset (on read) */ -#define _MEMDATA (ioaddr+12) /* Data port for IO-mapped memory */ -#define _ADDR_HI (ioaddr+15) /* Control registers for said */ -#define _ADDR_LO (ioaddr+14) -#define _CONFIG (ioaddr+2) /* Configuration register */ +#define _INTMASK (ioaddr + 0) /* writable */ +#define _STATUS (ioaddr + 0) /* readable */ +#define _COMMAND (ioaddr + 1) /* writable, returns random vals on read (?) */ +#define _RESET (ioaddr + 8) /* software reset (on read) */ +#define _MEMDATA (ioaddr + 12) /* Data port for IO-mapped memory */ +#define _ADDR_HI (ioaddr + 15) /* Control registers for said */ +#define _ADDR_LO (ioaddr + 14) +#define _CONFIG (ioaddr + 2) /* Configuration register */ #undef ASTATUS #undef ACOMMAND #undef AINTMASK #define ASTATUS() readb(_STATUS) -#define ACOMMAND(cmd) writeb((cmd),_COMMAND) -#define AINTMASK(msk) writeb((msk),_INTMASK) -#define SETCONF() writeb(lp->config,_CONFIG) +#define ACOMMAND(cmd) writeb((cmd), _COMMAND) +#define AINTMASK(msk) writeb((msk), _INTMASK) +#define SETCONF() writeb(lp->config, _CONFIG) /* @@ -90,7 +90,7 @@ static int __init arcrimi_probe(struct net_device *dev) BUGLVL(D_NORMAL) printk("E-mail me if you actually test the RIM I driver, please!\n"); BUGLVL(D_NORMAL) printk("Given: node %02Xh, shmem %lXh, irq %d\n", - dev->dev_addr[0], dev->mem_start, dev->irq); + dev->dev_addr[0], dev->mem_start, dev->irq); if (dev->mem_start <= 0 || dev->irq <= 0) { BUGLVL(D_NORMAL) printk("No autoprobe for RIM I; you " diff --git a/drivers/net/arcnet/arcnet.c b/drivers/net/arcnet/arcnet.c index 10f71c732b59..2a594d1c4b55 100644 --- a/drivers/net/arcnet/arcnet.c +++ b/drivers/net/arcnet/arcnet.c @@ -1,6 +1,6 @@ /* * Linux ARCnet driver - device-independent routines - * + * * Written 1997 by David Woodhouse. * Written 1994-1999 by Avery Pennarun. * Written 1999-2000 by Martin Mares . @@ -20,12 +20,12 @@ * modified by SRC, incorporated herein by reference. * * ********************** - * + * * The change log is now in a file called ChangeLog in this directory. * * Sources: * - Crynwr arcnet.com/arcether.com packet drivers. - * - arcnet.c v0.00 dated 1/1/94 and apparently by + * - arcnet.c v0.00 dated 1/1/94 and apparently by * Donald Becker - it didn't work :) * - skeleton.c v0.05 dated 11/16/93 by Donald Becker * (from Linux Kernel 1.1.45) @@ -69,8 +69,8 @@ static void arcnet_rx(struct net_device *dev, int bufnum); * arc_proto_default instead. It also must not be NULL; if you would like * to set it to NULL, set it to &arc_proto_null instead. */ - struct ArcProto *arc_proto_map[256], *arc_proto_default, - *arc_bcast_proto, *arc_raw_proto; +struct ArcProto *arc_proto_map[256], *arc_proto_default, + *arc_bcast_proto, *arc_raw_proto; static struct ArcProto arc_proto_null = { @@ -136,8 +136,8 @@ static int __init arcnet_init(void) BUGLVL(D_DURING) printk("arcnet: struct sizes: %Zd %Zd %Zd %Zd %Zd\n", - sizeof(struct arc_hardware), sizeof(struct arc_rfc1201), - sizeof(struct arc_rfc1051), sizeof(struct arc_eth_encap), + sizeof(struct arc_hardware), sizeof(struct arc_rfc1201), + sizeof(struct arc_rfc1051), sizeof(struct arc_eth_encap), sizeof(struct archdr)); return 0; @@ -184,11 +184,11 @@ static void arcnet_dump_packet(struct net_device *dev, int bufnum, /* hw.copy_from_card expects IRQ context so take the IRQ lock to keep it single threaded */ - if(take_arcnet_lock) + if (take_arcnet_lock) spin_lock_irqsave(&lp->lock, flags); lp->hw.copy_from_card(dev, bufnum, 0, buf, 512); - if(take_arcnet_lock) + if (take_arcnet_lock) spin_unlock_irqrestore(&lp->lock, flags); /* if the offset[0] byte is nonzero, this is a 256-byte packet */ @@ -202,7 +202,7 @@ static void arcnet_dump_packet(struct net_device *dev, int bufnum, #else -#define arcnet_dump_packet(dev, bufnum, desc,take_arcnet_lock) do { } while (0) +#define arcnet_dump_packet(dev, bufnum, desc, take_arcnet_lock) do { } while (0) #endif @@ -233,7 +233,7 @@ void arcnet_unregister_proto(struct ArcProto *proto) /* * Add a buffer to the queue. Only the interrupt handler is allowed to do * this, unless interrupts are disabled. - * + * * Note: we don't check for a full queue, since there aren't enough buffers * to more than fill it. */ @@ -248,7 +248,7 @@ static void release_arcbuf(struct net_device *dev, int bufnum) BUGLVL(D_DURING) { BUGMSG(D_DURING, "release_arcbuf: freed #%d; buffer queue is now: ", bufnum); - for (i = lp->next_buf; i != lp->first_free_buf; i = (i+1) % 5) + for (i = lp->next_buf; i != lp->first_free_buf; i = (i + 1) % 5) BUGMSG2(D_DURING, "#%d ", lp->buf_queue[i]); BUGMSG2(D_DURING, "\n"); } @@ -284,7 +284,7 @@ static int get_arcbuf(struct net_device *dev) BUGLVL(D_DURING) { BUGMSG(D_DURING, "get_arcbuf: got #%d; buffer queue is now: ", buf); - for (i = lp->next_buf; i != lp->first_free_buf; i = (i+1) % 5) + for (i = lp->next_buf; i != lp->first_free_buf; i = (i + 1) % 5) BUGMSG2(D_DURING, "#%d ", lp->buf_queue[i]); BUGMSG2(D_DURING, "\n"); } @@ -346,7 +346,7 @@ struct net_device *alloc_arcdev(const char *name) dev = alloc_netdev(sizeof(struct arcnet_local), name && *name ? name : "arc%d", NET_NAME_UNKNOWN, arcdev_setup); - if(dev) { + if (dev) { struct arcnet_local *lp = netdev_priv(dev); spin_lock_init(&lp->lock); } @@ -367,7 +367,7 @@ int arcnet_open(struct net_device *dev) struct arcnet_local *lp = netdev_priv(dev); int count, newmtu, error; - BUGMSG(D_INIT,"opened."); + BUGMSG(D_INIT, "opened."); if (!try_module_get(lp->hw.owner)) return -ENODEV; @@ -431,24 +431,24 @@ int arcnet_open(struct net_device *dev) BUGMSG(D_NORMAL, "WARNING! Station address FF may confuse " "DOS networking programs!\n"); - BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); + BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__); if (ASTATUS() & RESETflag) { - BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); + BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__); ACOMMAND(CFLAGScmd | RESETclear); } - BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); + BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__); /* make sure we're ready to receive IRQ's. */ AINTMASK(0); udelay(1); /* give it time to set the mask before * we reset it again. (may not even be * necessary) */ - BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); + BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__); lp->intmask = NORXflag | RECONflag; AINTMASK(lp->intmask); - BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); + BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__); netif_start_queue(dev); @@ -489,29 +489,29 @@ static int arcnet_header(struct sk_buff *skb, struct net_device *dev, struct ArcProto *proto; BUGMSG(D_DURING, - "create header from %d to %d; protocol %d (%Xh); size %u.\n", - saddr ? *(uint8_t *) saddr : -1, - daddr ? *(uint8_t *) daddr : -1, + "create header from %d to %d; protocol %d (%Xh); size %u.\n", + saddr ? *(uint8_t *)saddr : -1, + daddr ? *(uint8_t *)daddr : -1, type, type, len); - if (skb->len!=0 && len != skb->len) + if (skb->len != 0 && len != skb->len) BUGMSG(D_NORMAL, "arcnet_header: Yikes! skb->len(%d) != len(%d)!\n", skb->len, len); - /* Type is host order - ? */ - if(type == ETH_P_ARCNET) { - proto = arc_raw_proto; - BUGMSG(D_DEBUG, "arc_raw_proto used. proto='%c'\n",proto->suffix); - _daddr = daddr ? *(uint8_t *) daddr : 0; - } + /* Type is host order - ? */ + if (type == ETH_P_ARCNET) { + proto = arc_raw_proto; + BUGMSG(D_DEBUG, "arc_raw_proto used. proto='%c'\n", proto->suffix); + _daddr = daddr ? *(uint8_t *)daddr : 0; + } else if (!daddr) { /* * if the dest addr isn't provided, we can't choose an encapsulation! * Store the packet type (eg. ETH_P_IP) for now, and we'll push on a * real header when we do rebuild_header. */ - *(uint16_t *) skb_push(skb, 2) = type; + *(uint16_t *)skb_push(skb, 2) = type; /* * XXX: Why not use skb->mac_len? */ @@ -522,7 +522,7 @@ static int arcnet_header(struct sk_buff *skb, struct net_device *dev, } else { /* otherwise, we can just add the header as usual. */ - _daddr = *(uint8_t *) daddr; + _daddr = *(uint8_t *)daddr; proto_num = lp->default_proto[_daddr]; proto = arc_proto_map[proto_num]; BUGMSG(D_DURING, "building header for %02Xh using protocol '%c'\n", @@ -538,7 +538,7 @@ static int arcnet_header(struct sk_buff *skb, struct net_device *dev, /* Called by the kernel in order to transmit a packet. */ netdev_tx_t arcnet_send_packet(struct sk_buff *skb, - struct net_device *dev) + struct net_device *dev) { struct arcnet_local *lp = netdev_priv(dev); struct archdr *pkt; @@ -550,14 +550,14 @@ netdev_tx_t arcnet_send_packet(struct sk_buff *skb, BUGMSG(D_DURING, "transmit requested (status=%Xh, txbufs=%d/%d, len=%d, protocol %x)\n", - ASTATUS(), lp->cur_tx, lp->next_tx, skb->len,skb->protocol); + ASTATUS(), lp->cur_tx, lp->next_tx, skb->len, skb->protocol); - pkt = (struct archdr *) skb->data; + pkt = (struct archdr *)skb->data; soft = &pkt->soft.rfc1201; proto = arc_proto_map[soft->proto]; BUGMSG(D_SKB_SIZE, "skb: transmitting %d bytes to %02X\n", - skb->len, pkt->hard.dest); + skb->len, pkt->hard.dest); BUGLVL(D_SKB) arcnet_dump_skb(dev, skb, "tx"); /* fits in one packet? */ @@ -572,7 +572,7 @@ netdev_tx_t arcnet_send_packet(struct sk_buff *skb, spin_lock_irqsave(&lp->lock, flags); AINTMASK(0); - if(lp->next_tx == -1) + if (lp->next_tx == -1) txbuf = get_arcbuf(dev); else { txbuf = -1; @@ -594,9 +594,9 @@ netdev_tx_t arcnet_send_packet(struct sk_buff *skb, if (proto->continue_tx && proto->continue_tx(dev, txbuf)) { - BUGMSG(D_NORMAL, - "bug! continue_tx finished the first time! " - "(proto='%c')\n", proto->suffix); + BUGMSG(D_NORMAL, + "bug! continue_tx finished the first time! " + "(proto='%c')\n", proto->suffix); } } retval = NETDEV_TX_OK; @@ -606,14 +606,14 @@ netdev_tx_t arcnet_send_packet(struct sk_buff *skb, freeskb = 0; } - BUGMSG(D_DEBUG, "%s: %d: %s, status: %x\n",__FILE__,__LINE__,__func__,ASTATUS()); + BUGMSG(D_DEBUG, "%s: %d: %s, status: %x\n", __FILE__, __LINE__, __func__, ASTATUS()); /* make sure we didn't ignore a TX IRQ while we were in here */ AINTMASK(0); - BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); - lp->intmask |= TXFREEflag|EXCNAKflag; + BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__); + lp->intmask |= TXFREEflag | EXCNAKflag; AINTMASK(lp->intmask); - BUGMSG(D_DEBUG, "%s: %d: %s, status: %x\n",__FILE__,__LINE__,__func__,ASTATUS()); + BUGMSG(D_DEBUG, "%s: %d: %s, status: %x\n", __FILE__, __LINE__, __func__, ASTATUS()); spin_unlock_irqrestore(&lp->lock, flags); if (freeskb) { @@ -649,7 +649,7 @@ static int go_tx(struct net_device *dev) lp->lasttrans_dest = lp->lastload_dest; lp->lastload_dest = 0; lp->excnak_pending = 0; - lp->intmask |= TXFREEflag|EXCNAKflag; + lp->intmask |= TXFREEflag | EXCNAKflag; return 1; } @@ -676,12 +676,12 @@ void arcnet_timeout(struct net_device *dev) /* make sure we didn't miss a TX or a EXC NAK IRQ */ AINTMASK(0); - lp->intmask |= TXFREEflag|EXCNAKflag; + lp->intmask |= TXFREEflag | EXCNAKflag; AINTMASK(lp->intmask); - + spin_unlock_irqrestore(&lp->lock, flags); - if (time_after(jiffies, lp->last_timeout + 10*HZ)) { + if (time_after(jiffies, lp->last_timeout + 10 * HZ)) { BUGMSG(D_EXTRA, "tx timed out%s (status=%Xh, intmask=%Xh, dest=%02Xh)\n", msg, status, lp->intmask, lp->lasttrans_dest); lp->last_timeout = jiffies; @@ -710,7 +710,7 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id) lp = netdev_priv(dev); BUG_ON(!lp); - + spin_lock(&lp->lock); /* @@ -731,16 +731,16 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id) boguscount = 5; do { status = ASTATUS(); - diagstatus = (status >> 8) & 0xFF; + diagstatus = (status >> 8) & 0xFF; BUGMSG(D_DEBUG, "%s: %d: %s: status=%x\n", - __FILE__,__LINE__,__func__,status); + __FILE__, __LINE__, __func__, status); didsomething = 0; /* * RESET flag was enabled - card is resetting and if RX is * disabled, it's NOT because we just got a packet. - * + * * The card is in an undefined state. Clear it out and start over. */ if (status & RESETflag) { @@ -751,14 +751,14 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id) /* get out of the interrupt handler! */ break; } - /* + /* * RX is inhibited - we must have received something. Prepare to * receive into the next buffer. - * + * * We don't actually copy the received packet from the card until * after the transmit handler runs (and possibly launches the next * tx); this should improve latency slightly if we get both types - * of interrupts at once. + * of interrupts at once. */ recbuf = -1; if (status & lp->intmask & NORXflag) { @@ -775,27 +775,27 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id) didsomething++; } - if((diagstatus & EXCNAKflag)) { + if ((diagstatus & EXCNAKflag)) { BUGMSG(D_DURING, "EXCNAK IRQ (diagstat=%Xh)\n", diagstatus); - ACOMMAND(NOTXcmd); /* disable transmit */ - lp->excnak_pending = 1; + ACOMMAND(NOTXcmd); /* disable transmit */ + lp->excnak_pending = 1; - ACOMMAND(EXCNAKclear); + ACOMMAND(EXCNAKclear); lp->intmask &= ~(EXCNAKflag); - didsomething++; - } + didsomething++; + } /* a transmit finished, and we're interested in it. */ if ((status & lp->intmask & TXFREEflag) || lp->timed_out) { - lp->intmask &= ~(TXFREEflag|EXCNAKflag); + lp->intmask &= ~(TXFREEflag | EXCNAKflag); BUGMSG(D_DURING, "TX IRQ (stat=%Xh)\n", status); if (lp->cur_tx != -1 && !lp->timed_out) { - if(!(status & TXACKflag)) { + if (!(status & TXACKflag)) { if (lp->lasttrans_dest != 0) { BUGMSG(D_EXTRA, "transmit was not acknowledged! " @@ -813,16 +813,16 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id) if (lp->outgoing.proto && lp->outgoing.proto->ack_tx) { - int ackstatus; - if(status & TXACKflag) - ackstatus=2; - else if(lp->excnak_pending) - ackstatus=1; - else - ackstatus=0; - - lp->outgoing.proto - ->ack_tx(dev, ackstatus); + int ackstatus; + if (status & TXACKflag) + ackstatus = 2; + else if (lp->excnak_pending) + ackstatus = 1; + else + ackstatus = 0; + + lp->outgoing.proto + ->ack_tx(dev, ackstatus); } } if (lp->cur_tx != -1) @@ -842,11 +842,11 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id) if (lp->outgoing.proto->continue_tx(dev, txbuf)) { /* that was the last segment */ dev->stats.tx_bytes += lp->outgoing.skb->len; - if(!lp->outgoing.proto->ack_tx) - { - dev_kfree_skb_irq(lp->outgoing.skb); - lp->outgoing.proto = NULL; - } + if (!lp->outgoing.proto->ack_tx) + { + dev_kfree_skb_irq(lp->outgoing.skb); + lp->outgoing.proto = NULL; + } } lp->next_tx = txbuf; } @@ -871,8 +871,8 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id) BUGMSG(D_RECON, "Network reconfiguration detected (status=%Xh)\n", status); /* MYRECON bit is at bit 7 of diagstatus */ - if(diagstatus & 0x80) - BUGMSG(D_RECON,"Put out that recon myself\n"); + if (diagstatus & 0x80) + BUGMSG(D_RECON, "Put out that recon myself\n"); /* is the RECON info empty or old? */ if (!lp->first_recon || !lp->last_recon || @@ -889,7 +889,7 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id) BUGMSG(D_DURING, "recon: counter=%d, time=%lds, net=%d\n", lp->num_recons, - (lp->last_recon - lp->first_recon) / HZ, + (lp->last_recon - lp->first_recon) / HZ, lp->network_down); /* if network is marked up; @@ -911,7 +911,7 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id) } } } else if (lp->network_down && - time_after(jiffies, lp->last_recon + HZ * 10)) { + time_after(jiffies, lp->last_recon + HZ * 10)) { if (lp->network_down) BUGMSG(D_NORMAL, "cabling restored?\n"); lp->first_recon = lp->last_recon = 0; @@ -920,7 +920,7 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id) BUGMSG(D_DURING, "not recon: clearing counters anyway.\n"); } - if(didsomething) { + if (didsomething) { retval |= IRQ_HANDLED; } } @@ -934,7 +934,7 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id) AINTMASK(0); udelay(1); AINTMASK(lp->intmask); - + spin_unlock(&lp->lock); return retval; } @@ -1007,7 +1007,7 @@ static void null_rx(struct net_device *dev, int bufnum, struct archdr *pkthdr, int length) { BUGMSG(D_PROTO, - "rx: don't know how to deal with proto %02Xh from host %02Xh.\n", + "rx: don't know how to deal with proto %02Xh from host %02Xh.\n", pkthdr->soft.rfc1201.proto, pkthdr->hard.source); } diff --git a/drivers/net/arcnet/capmode.c b/drivers/net/arcnet/capmode.c index 42fce91b71fc..95a6cf07965c 100644 --- a/drivers/net/arcnet/capmode.c +++ b/drivers/net/arcnet/capmode.c @@ -71,12 +71,12 @@ static void rx(struct net_device *dev, int bufnum, /* use these variables to be sure we count in bytes, not in sizeof(struct archdr) */ - pktbuf=(char*)pkt; - pkthdrbuf=(char*)pkthdr; - memcpy(pktbuf, pkthdrbuf, ARC_HDR_SIZE+sizeof(pkt->soft.cap.proto)); - memcpy(pktbuf+ARC_HDR_SIZE+sizeof(pkt->soft.cap.proto)+sizeof(int), - pkthdrbuf+ARC_HDR_SIZE+sizeof(pkt->soft.cap.proto), - sizeof(struct archdr)-ARC_HDR_SIZE-sizeof(pkt->soft.cap.proto)); + pktbuf = (char *)pkt; + pkthdrbuf = (char *)pkthdr; + memcpy(pktbuf, pkthdrbuf, ARC_HDR_SIZE + sizeof(pkt->soft.cap.proto)); + memcpy(pktbuf + ARC_HDR_SIZE + sizeof(pkt->soft.cap.proto) + sizeof(int), + pkthdrbuf + ARC_HDR_SIZE + sizeof(pkt->soft.cap.proto), + sizeof(struct archdr) - ARC_HDR_SIZE - sizeof(pkt->soft.cap.proto)); if (length > sizeof(pkt->soft)) lp->hw.copy_from_card(dev, bufnum, ofs + sizeof(pkt->soft), @@ -101,10 +101,10 @@ static int build_header(struct sk_buff *skb, uint8_t daddr) { int hdr_size = ARC_HDR_SIZE; - struct archdr *pkt = (struct archdr *) skb_push(skb, hdr_size); + struct archdr *pkt = (struct archdr *)skb_push(skb, hdr_size); BUGMSG(D_PROTO, "Preparing header for cap packet %x.\n", - *((int*)&pkt->soft.cap.cookie[0])); + *((int *)&pkt->soft.cap.cookie[0])); /* * Set the source hardware address. * @@ -148,7 +148,7 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, lp->next_tx, lp->cur_tx, bufnum); BUGMSG(D_PROTO, "Sending for cap packet %x.\n", - *((int*)&pkt->soft.cap.cookie[0])); + *((int *)&pkt->soft.cap.cookie[0])); if (length > XMTU) { /* should never happen! other people already check for this. */ @@ -166,7 +166,7 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, hard->offset[0] = ofs = 256 - length; BUGMSG(D_DURING, "prepare_tx: length=%d ofs=%d\n", - length,ofs); + length, ofs); /* Copy the arcnet-header + the protocol byte down: */ lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE); @@ -175,8 +175,8 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, /* Skip the extra integer we have written into it as a cookie but write the rest of the message: */ - lp->hw.copy_to_card(dev, bufnum, ofs+1, - ((unsigned char*)&pkt->soft.cap.mes),length-1); + lp->hw.copy_to_card(dev, bufnum, ofs + 1, + ((unsigned char *)&pkt->soft.cap.mes), length - 1); lp->lastload_dest = hard->dest; @@ -188,21 +188,21 @@ static int ack_tx(struct net_device *dev, int acked) struct arcnet_local *lp = netdev_priv(dev); struct sk_buff *ackskb; struct archdr *ackpkt; - int length=sizeof(struct arc_cap); + int length = sizeof(struct arc_cap); BUGMSG(D_DURING, "capmode: ack_tx: protocol: %x: result: %d\n", - lp->outgoing.skb->protocol, acked); + lp->outgoing.skb->protocol, acked); BUGLVL(D_SKB) arcnet_dump_skb(dev, lp->outgoing.skb, "ack_tx"); /* Now alloc a skb to send back up through the layers: */ - ackskb = alloc_skb(length + ARC_HDR_SIZE , GFP_ATOMIC); + ackskb = alloc_skb(length + ARC_HDR_SIZE, GFP_ATOMIC); if (ackskb == NULL) { BUGMSG(D_NORMAL, "Memory squeeze, can't acknowledge.\n"); goto free_outskb; } - skb_put(ackskb, length + ARC_HDR_SIZE ); + skb_put(ackskb, length + ARC_HDR_SIZE); ackskb->dev = dev; skb_reset_mac_header(ackskb); @@ -212,10 +212,10 @@ static int ack_tx(struct net_device *dev, int acked) skb_copy_from_linear_data(lp->outgoing.skb, ackpkt, ARC_HDR_SIZE + sizeof(struct arc_cap)); ackpkt->soft.cap.proto = 0; /* using protocol 0 for acknowledge */ - ackpkt->soft.cap.mes.ack=acked; + ackpkt->soft.cap.mes.ack = acked; BUGMSG(D_PROTO, "Ackknowledge for cap packet %x.\n", - *((int*)&ackpkt->soft.cap.cookie[0])); + *((int *)&ackpkt->soft.cap.cookie[0])); ackskb->protocol = cpu_to_be16(ETH_P_ARCNET); diff --git a/drivers/net/arcnet/com20020-isa.c b/drivers/net/arcnet/com20020-isa.c index 45c61a2c5fbd..d8746caf8e7a 100644 --- a/drivers/net/arcnet/com20020-isa.c +++ b/drivers/net/arcnet/com20020-isa.c @@ -1,6 +1,6 @@ /* * Linux ARCnet driver - COM20020 chipset support - * + * * Written 1997 by David Woodhouse. * Written 1994-1999 by Avery Pennarun. * Written 1999-2000 by Martin Mares . diff --git a/drivers/net/arcnet/com20020-pci.c b/drivers/net/arcnet/com20020-pci.c index 96edc1346124..e0f489a117f1 100644 --- a/drivers/net/arcnet/com20020-pci.c +++ b/drivers/net/arcnet/com20020-pci.c @@ -1,7 +1,7 @@ /* * Linux ARCnet driver - COM20020 PCI support * Contemporary Controls PCI20 and SOHARD SH-ARC PCI - * + * * Written 1994-1999 by Avery Pennarun, * based on an ISA version by David Woodhouse. * Written 1999-2000 by Martin Mares . diff --git a/drivers/net/arcnet/com20020.c b/drivers/net/arcnet/com20020.c index 1a8437842fbc..cd2a5ca56ce5 100644 --- a/drivers/net/arcnet/com20020.c +++ b/drivers/net/arcnet/com20020.c @@ -1,6 +1,6 @@ /* * Linux ARCnet driver - COM20020 chipset support - * + * * Written 1997 by David Woodhouse. * Written 1994-1999 by Avery Pennarun. * Written 1999 by Martin Mares . @@ -108,7 +108,7 @@ int com20020_check(struct net_device *dev) { SET_SUBADR(SUB_SETUP2); outb(lp->setup2, _XREG); - + /* must now write the magic "restart operation" command */ mdelay(1); outb(0x18, _COMMAND); @@ -117,7 +117,7 @@ int com20020_check(struct net_device *dev) lp->config = 0x21 | (lp->timeout << 3) | (lp->backplane << 2); /* set node ID to 0x42 (but transmitter is disabled, so it's okay) */ SETCONF; - outb(0x42, ioaddr + BUS_ALIGN*7); + outb(0x42, ioaddr + BUS_ALIGN * 7); status = ASTATUS(); @@ -129,7 +129,7 @@ int com20020_check(struct net_device *dev) /* Enable TX */ outb(0x39, _CONFIG); - outb(inb(ioaddr + BUS_ALIGN*8), ioaddr + BUS_ALIGN*7); + outb(inb(ioaddr + BUS_ALIGN * 8), ioaddr + BUS_ALIGN * 7); ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear); @@ -193,7 +193,7 @@ int com20020_found(struct net_device *dev, int shared) lp->hw.close = com20020_close; if (!dev->dev_addr[0]) - dev->dev_addr[0] = inb(ioaddr + BUS_ALIGN*8); /* FIXME: do this some other way! */ + dev->dev_addr[0] = inb(ioaddr + BUS_ALIGN * 8); /* FIXME: do this some other way! */ SET_SUBADR(SUB_SETUP1); outb(lp->setup, _XREG); @@ -202,7 +202,7 @@ int com20020_found(struct net_device *dev, int shared) { SET_SUBADR(SUB_SETUP2); outb(lp->setup2, _XREG); - + /* must now write the magic "restart operation" command */ mdelay(1); outb(0x18, _COMMAND); @@ -232,7 +232,7 @@ int com20020_found(struct net_device *dev, int shared) BUGMSG(D_NORMAL, "Using extended timeout value of %d.\n", lp->timeout); BUGMSG(D_NORMAL, "Using CKP %d - data rate %s.\n", - lp->setup >> 1, + lp->setup >> 1, clockrates[3 - ((lp->setup2 & 0xF0) >> 4) + ((lp->setup & 0x0F) >> 1)]); if (register_netdev(dev)) { @@ -243,9 +243,9 @@ int com20020_found(struct net_device *dev, int shared) } -/* +/* * Do a hardware reset on the card, and set up necessary registers. - * + * * This should be called as little as possible, because it disrupts the * token on the network (causes a RECON) and requires a significant delay. * @@ -258,15 +258,15 @@ static int com20020_reset(struct net_device *dev, int really_reset) u_char inbyte; BUGMSG(D_DEBUG, "%s: %d: %s: dev: %p, lp: %p, dev->name: %s\n", - __FILE__,__LINE__,__func__,dev,lp,dev->name); + __FILE__, __LINE__, __func__, dev, lp, dev->name); BUGMSG(D_INIT, "Resetting %s (status=%02Xh)\n", dev->name, ASTATUS()); - BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); + BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__); lp->config = TXENcfg | (lp->timeout << 3) | (lp->backplane << 2); /* power-up defaults */ SETCONF; - BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); + BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__); if (really_reset) { /* reset the card */ @@ -274,22 +274,22 @@ static int com20020_reset(struct net_device *dev, int really_reset) mdelay(RESETtime * 2); /* COM20020 seems to be slower sometimes */ } /* clear flags & end reset */ - BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); + BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__); ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear); /* verify that the ARCnet signature byte is present */ - BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); + BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__); com20020_copy_from_card(dev, 0, 0, &inbyte, 1); - BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); + BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__); if (inbyte != TESTvalue) { - BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); + BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__); BUGMSG(D_NORMAL, "reset failed: TESTvalue not present.\n"); return 1; } /* enable extended (512-byte) packets */ ACOMMAND(CONFIGcmd | EXTconf); - BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); + BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__); /* done! return success. */ return 0; @@ -299,7 +299,7 @@ static int com20020_reset(struct net_device *dev, int really_reset) static void com20020_setmask(struct net_device *dev, int mask) { u_int ioaddr = dev->base_addr; - BUGMSG(D_DURING, "Setting mask to %x at %x\n",mask,ioaddr); + BUGMSG(D_DURING, "Setting mask to %x at %x\n", mask, ioaddr); AINTMASK(mask); } @@ -315,7 +315,7 @@ static int com20020_status(struct net_device *dev) { u_int ioaddr = dev->base_addr; - return ASTATUS() + (ADIAGSTATUS()<<8); + return ASTATUS() + (ADIAGSTATUS() << 8); } static void com20020_close(struct net_device *dev) diff --git a/drivers/net/arcnet/com20020_cs.c b/drivers/net/arcnet/com20020_cs.c index 057d9582132a..f68752102379 100644 --- a/drivers/net/arcnet/com20020_cs.c +++ b/drivers/net/arcnet/com20020_cs.c @@ -1,6 +1,6 @@ /* * Linux ARCnet driver - COM20020 PCMCIA support - * + * * Written 1994-1999 by Avery Pennarun, * based on an ISA version by David Woodhouse. * Derived from ibmtr_cs.c by Steve Kipisz (pcmcia-cs 3.1.4) @@ -19,14 +19,14 @@ * Director, National Security Agency. This software may only be used * and distributed according to the terms of the GNU General Public License as * modified by SRC, incorporated herein by reference. - * + * * ********************** * Changes: * Arnaldo Carvalho de Melo - 08/08/2000 * - reorganize kmallocs in com20020_attach, checking all for failure * and releasing the previous allocations if one fails * ********************** - * + * * For more details, see drivers/net/arcnet.c * * ********************** @@ -53,33 +53,33 @@ static void regdump(struct net_device *dev) { #ifdef DEBUG - int ioaddr = dev->base_addr; - int count; - - netdev_dbg(dev, "register dump:\n"); - for (count = ioaddr; count < ioaddr + 16; count++) - { - if (!(count % 16)) - pr_cont("%04X:", count); - pr_cont(" %02X", inb(count)); - } - pr_cont("\n"); - - netdev_dbg(dev, "buffer0 dump:\n"); + int ioaddr = dev->base_addr; + int count; + + netdev_dbg(dev, "register dump:\n"); + for (count = ioaddr; count < ioaddr + 16; count++) + { + if (!(count % 16)) + pr_cont("%04X:", count); + pr_cont(" %02X", inb(count)); + } + pr_cont("\n"); + + netdev_dbg(dev, "buffer0 dump:\n"); /* set up the address register */ - count = 0; + count = 0; outb((count >> 8) | RDDATAflag | AUTOINCflag, _ADDR_HI); outb(count & 0xff, _ADDR_LO); - - for (count = 0; count < 256+32; count++) - { - if (!(count % 16)) - pr_cont("%04X:", count); - - /* copy the data */ - pr_cont(" %02X", inb(_MEMDATA)); - } - pr_cont("\n"); + + for (count = 0; count < 256 + 32; count++) + { + if (!(count % 16)) + pr_cont("%04X:", count); + + /* copy the data */ + pr_cont(" %02X", inb(_MEMDATA)); + } + pr_cont("\n"); #endif } @@ -114,169 +114,169 @@ static void com20020_detach(struct pcmcia_device *p_dev); static int com20020_probe(struct pcmcia_device *p_dev) { - struct com20020_dev *info; - struct net_device *dev; - struct arcnet_local *lp; + struct com20020_dev *info; + struct net_device *dev; + struct arcnet_local *lp; - dev_dbg(&p_dev->dev, "com20020_attach()\n"); + dev_dbg(&p_dev->dev, "com20020_attach()\n"); - /* Create new network device */ - info = kzalloc(sizeof(*info), GFP_KERNEL); - if (!info) - goto fail_alloc_info; + /* Create new network device */ + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (!info) + goto fail_alloc_info; - dev = alloc_arcdev(""); - if (!dev) - goto fail_alloc_dev; + dev = alloc_arcdev(""); + if (!dev) + goto fail_alloc_dev; - lp = netdev_priv(dev); - lp->timeout = timeout; - lp->backplane = backplane; - lp->clockp = clockp; - lp->clockm = clockm & 3; - lp->hw.owner = THIS_MODULE; + lp = netdev_priv(dev); + lp->timeout = timeout; + lp->backplane = backplane; + lp->clockp = clockp; + lp->clockm = clockm & 3; + lp->hw.owner = THIS_MODULE; - /* fill in our module parameters as defaults */ - dev->dev_addr[0] = node; + /* fill in our module parameters as defaults */ + dev->dev_addr[0] = node; - p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - p_dev->resource[0]->end = 16; - p_dev->config_flags |= CONF_ENABLE_IRQ; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = 16; + p_dev->config_flags |= CONF_ENABLE_IRQ; - info->dev = dev; - p_dev->priv = info; + info->dev = dev; + p_dev->priv = info; - return com20020_config(p_dev); + return com20020_config(p_dev); fail_alloc_dev: - kfree(info); + kfree(info); fail_alloc_info: - return -ENOMEM; + return -ENOMEM; } /* com20020_attach */ static void com20020_detach(struct pcmcia_device *link) { - struct com20020_dev *info = link->priv; - struct net_device *dev = info->dev; + struct com20020_dev *info = link->priv; + struct net_device *dev = info->dev; - dev_dbg(&link->dev, "detach...\n"); + dev_dbg(&link->dev, "detach...\n"); - dev_dbg(&link->dev, "com20020_detach\n"); + dev_dbg(&link->dev, "com20020_detach\n"); - dev_dbg(&link->dev, "unregister...\n"); + dev_dbg(&link->dev, "unregister...\n"); - unregister_netdev(dev); + unregister_netdev(dev); - /* - * this is necessary because we register our IRQ separately - * from card services. - */ - if (dev->irq) - free_irq(dev->irq, dev); + /* + * this is necessary because we register our IRQ separately + * from card services. + */ + if (dev->irq) + free_irq(dev->irq, dev); - com20020_release(link); + com20020_release(link); - /* Unlink device structure, free bits */ - dev_dbg(&link->dev, "unlinking...\n"); - if (link->priv) - { - dev = info->dev; - if (dev) + /* Unlink device structure, free bits */ + dev_dbg(&link->dev, "unlinking...\n"); + if (link->priv) { - dev_dbg(&link->dev, "kfree...\n"); - free_netdev(dev); + dev = info->dev; + if (dev) + { + dev_dbg(&link->dev, "kfree...\n"); + free_netdev(dev); + } + dev_dbg(&link->dev, "kfree2...\n"); + kfree(info); } - dev_dbg(&link->dev, "kfree2...\n"); - kfree(info); - } } /* com20020_detach */ static int com20020_config(struct pcmcia_device *link) { - struct arcnet_local *lp; - struct com20020_dev *info; - struct net_device *dev; - int i, ret; - int ioaddr; + struct arcnet_local *lp; + struct com20020_dev *info; + struct net_device *dev; + int i, ret; + int ioaddr; + + info = link->priv; + dev = info->dev; - info = link->priv; - dev = info->dev; + dev_dbg(&link->dev, "config...\n"); - dev_dbg(&link->dev, "config...\n"); + dev_dbg(&link->dev, "com20020_config\n"); - dev_dbg(&link->dev, "com20020_config\n"); + dev_dbg(&link->dev, "baseport1 is %Xh\n", + (unsigned int)link->resource[0]->start); - dev_dbg(&link->dev, "baseport1 is %Xh\n", - (unsigned int) link->resource[0]->start); + i = -ENODEV; + link->io_lines = 16; - i = -ENODEV; - link->io_lines = 16; + if (!link->resource[0]->start) + { + for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10) + { + link->resource[0]->start = ioaddr; + i = pcmcia_request_io(link); + if (i == 0) + break; + } + } + else + i = pcmcia_request_io(link); + + if (i != 0) + { + dev_dbg(&link->dev, "requestIO failed totally!\n"); + goto failed; + } + + ioaddr = dev->base_addr = link->resource[0]->start; + dev_dbg(&link->dev, "got ioaddr %Xh\n", ioaddr); + + dev_dbg(&link->dev, "request IRQ %d\n", + link->irq); + if (!link->irq) + { + dev_dbg(&link->dev, "requestIRQ failed totally!\n"); + goto failed; + } - if (!link->resource[0]->start) - { - for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10) + dev->irq = link->irq; + + ret = pcmcia_enable_device(link); + if (ret) + goto failed; + + if (com20020_check(dev)) { - link->resource[0]->start = ioaddr; - i = pcmcia_request_io(link); - if (i == 0) - break; + regdump(dev); + goto failed; } - } - else - i = pcmcia_request_io(link); - - if (i != 0) - { - dev_dbg(&link->dev, "requestIO failed totally!\n"); - goto failed; - } - - ioaddr = dev->base_addr = link->resource[0]->start; - dev_dbg(&link->dev, "got ioaddr %Xh\n", ioaddr); - - dev_dbg(&link->dev, "request IRQ %d\n", - link->irq); - if (!link->irq) - { - dev_dbg(&link->dev, "requestIRQ failed totally!\n"); - goto failed; - } - - dev->irq = link->irq; - - ret = pcmcia_enable_device(link); - if (ret) - goto failed; - - if (com20020_check(dev)) - { - regdump(dev); - goto failed; - } - - lp = netdev_priv(dev); - lp->card_name = "PCMCIA COM20020"; - lp->card_flags = ARC_CAN_10MBIT; /* pretend all of them can 10Mbit */ - - SET_NETDEV_DEV(dev, &link->dev); - - i = com20020_found(dev, 0); /* calls register_netdev */ - - if (i != 0) { - dev_notice(&link->dev, - "com20020_found() failed\n"); - goto failed; - } - - netdev_dbg(dev, "port %#3lx, irq %d\n", - dev->base_addr, dev->irq); - return 0; + + lp = netdev_priv(dev); + lp->card_name = "PCMCIA COM20020"; + lp->card_flags = ARC_CAN_10MBIT; /* pretend all of them can 10Mbit */ + + SET_NETDEV_DEV(dev, &link->dev); + + i = com20020_found(dev, 0); /* calls register_netdev */ + + if (i != 0) { + dev_notice(&link->dev, + "com20020_found() failed\n"); + goto failed; + } + + netdev_dbg(dev, "port %#3lx, irq %d\n", + dev->base_addr, dev->irq); + return 0; failed: - dev_dbg(&link->dev, "com20020_config failed...\n"); - com20020_release(link); - return -ENODEV; + dev_dbg(&link->dev, "com20020_config failed...\n"); + com20020_release(link); + return -ENODEV; } /* com20020_config */ static void com20020_release(struct pcmcia_device *link) @@ -312,9 +312,9 @@ static int com20020_resume(struct pcmcia_device *link) static const struct pcmcia_device_id com20020_ids[] = { PCMCIA_DEVICE_PROD_ID12("Contemporary Control Systems, Inc.", - "PCM20 Arcnet Adapter", 0x59991666, 0x95dfffaf), + "PCM20 Arcnet Adapter", 0x59991666, 0x95dfffaf), PCMCIA_DEVICE_PROD_ID12("SoHard AG", - "SH ARC PCMCIA", 0xf8991729, 0x69dff0c7), + "SH ARC PCMCIA", 0xf8991729, 0x69dff0c7), PCMCIA_DEVICE_NULL }; MODULE_DEVICE_TABLE(pcmcia, com20020_ids); diff --git a/drivers/net/arcnet/com90io.c b/drivers/net/arcnet/com90io.c index 487d780ebbdf..23ac9edbe91c 100644 --- a/drivers/net/arcnet/com90io.c +++ b/drivers/net/arcnet/com90io.c @@ -1,6 +1,6 @@ /* * Linux ARCnet driver - COM90xx chipset (IO-mapped buffers) - * + * * Written 1997 by David Woodhouse. * Written 1994-1999 by Avery Pennarun. * Written 1999-2000 by Martin Mares . @@ -60,23 +60,23 @@ static void com90io_copy_from_card(struct net_device *dev, int bufnum, int offse #define ARCNET_TOTAL_SIZE 16 /* COM 9026 controller chip --> ARCnet register addresses */ -#define _INTMASK (ioaddr+0) /* writable */ -#define _STATUS (ioaddr+0) /* readable */ -#define _COMMAND (ioaddr+1) /* writable, returns random vals on read (?) */ -#define _RESET (ioaddr+8) /* software reset (on read) */ -#define _MEMDATA (ioaddr+12) /* Data port for IO-mapped memory */ -#define _ADDR_HI (ioaddr+15) /* Control registers for said */ -#define _ADDR_LO (ioaddr+14) -#define _CONFIG (ioaddr+2) /* Configuration register */ +#define _INTMASK (ioaddr + 0) /* writable */ +#define _STATUS (ioaddr + 0) /* readable */ +#define _COMMAND (ioaddr + 1) /* writable, returns random vals on read (?) */ +#define _RESET (ioaddr + 8) /* software reset (on read) */ +#define _MEMDATA (ioaddr + 12) /* Data port for IO-mapped memory */ +#define _ADDR_HI (ioaddr + 15) /* Control registers for said */ +#define _ADDR_LO (ioaddr + 14) +#define _CONFIG (ioaddr + 2) /* Configuration register */ #undef ASTATUS #undef ACOMMAND #undef AINTMASK #define ASTATUS() inb(_STATUS) -#define ACOMMAND(cmd) outb((cmd),_COMMAND) -#define AINTMASK(msk) outb((msk),_INTMASK) -#define SETCONF() outb((lp->config),_CONFIG) +#define ACOMMAND(cmd) outb((cmd), _COMMAND) +#define AINTMASK(msk) outb((msk), _INTMASK) +#define SETCONF() outb((lp->config), _CONFIG) /**************************************************************************** diff --git a/drivers/net/arcnet/com90xx.c b/drivers/net/arcnet/com90xx.c index b80fbe40aa0e..a4c5d5909b13 100644 --- a/drivers/net/arcnet/com90xx.c +++ b/drivers/net/arcnet/com90xx.c @@ -1,6 +1,6 @@ /* * Linux ARCnet driver - COM90xx chipset (memory-mapped buffers) - * + * * Written 1994-1999 by Avery Pennarun. * Written 1999 by Martin Mares . * Derived from skeleton.c by Donald Becker. @@ -77,25 +77,25 @@ static int numcards; /* Amount of I/O memory used by the card */ #define BUFFER_SIZE (512) -#define MIRROR_SIZE (BUFFER_SIZE*4) +#define MIRROR_SIZE (BUFFER_SIZE * 4) /* COM 9026 controller chip --> ARCnet register addresses */ -#define _INTMASK (ioaddr+0) /* writable */ -#define _STATUS (ioaddr+0) /* readable */ -#define _COMMAND (ioaddr+1) /* writable, returns random vals on read (?) */ -#define _CONFIG (ioaddr+2) /* Configuration register */ -#define _RESET (ioaddr+8) /* software reset (on read) */ -#define _MEMDATA (ioaddr+12) /* Data port for IO-mapped memory */ -#define _ADDR_HI (ioaddr+15) /* Control registers for said */ -#define _ADDR_LO (ioaddr+14) +#define _INTMASK (ioaddr + 0) /* writable */ +#define _STATUS (ioaddr + 0) /* readable */ +#define _COMMAND (ioaddr + 1) /* writable, returns random vals on read (?) */ +#define _CONFIG (ioaddr + 2) /* Configuration register */ +#define _RESET (ioaddr + 8) /* software reset (on read) */ +#define _MEMDATA (ioaddr + 12) /* Data port for IO-mapped memory */ +#define _ADDR_HI (ioaddr + 15) /* Control registers for said */ +#define _ADDR_LO (ioaddr + 14) #undef ASTATUS #undef ACOMMAND #undef AINTMASK #define ASTATUS() inb(_STATUS) -#define ACOMMAND(cmd) outb((cmd),_COMMAND) -#define AINTMASK(msk) outb((msk),_INTMASK) +#define ACOMMAND(cmd) outb((cmd), _COMMAND) +#define AINTMASK(msk) outb((msk), _INTMASK) static int com90xx_skip_probe __initdata = 0; @@ -127,12 +127,12 @@ static void __init com90xx_probe(void) if (!io && !irq && !shmem && !*device && com90xx_skip_probe) return; - shmems = kzalloc(((0x100000-0xa0000) / 0x800) * sizeof(unsigned long), + shmems = kzalloc(((0x100000 - 0xa0000) / 0x800) * sizeof(unsigned long), GFP_KERNEL); if (!shmems) return; - iomem = kzalloc(((0x100000-0xa0000) / 0x800) * sizeof(void __iomem *), - GFP_KERNEL); + iomem = kzalloc(((0x100000 - 0xa0000) / 0x800) * sizeof(void __iomem *), + GFP_KERNEL); if (!iomem) { kfree(shmems); return; @@ -579,7 +579,7 @@ static void com90xx_setmask(struct net_device *dev, int mask) /* * Do a hardware reset on the card, and set up necessary registers. - * + * * This should be called as little as possible, because it disrupts the * token on the network (causes a RECON) and requires a significant delay. * diff --git a/drivers/net/arcnet/rfc1051.c b/drivers/net/arcnet/rfc1051.c index f81db4070a57..ae1ded286897 100644 --- a/drivers/net/arcnet/rfc1051.c +++ b/drivers/net/arcnet/rfc1051.c @@ -1,6 +1,6 @@ /* * Linux ARCnet driver - RFC1051 ("simple" standard) packet encapsulation - * + * * Written 1994-1999 by Avery Pennarun. * Derived from skeleton.c by Donald Becker. * @@ -84,12 +84,12 @@ MODULE_LICENSE("GPL"); /* * Determine a packet's protocol ID. - * + * * With ARCnet we have to convert everything to Ethernet-style stuff. */ static __be16 type_trans(struct sk_buff *skb, struct net_device *dev) { - struct archdr *pkt = (struct archdr *) skb->data; + struct archdr *pkt = (struct archdr *)skb->data; struct arc_rfc1051 *soft = &pkt->soft.rfc1051; int hdr_size = ARC_HDR_SIZE + RFC1051_HDR_SIZE; @@ -146,7 +146,7 @@ static void rx(struct net_device *dev, int bufnum, skb_put(skb, length + ARC_HDR_SIZE); skb->dev = dev; - pkt = (struct archdr *) skb->data; + pkt = (struct archdr *)skb->data; /* up to sizeof(pkt->soft) has already been copied from the card */ memcpy(pkt, pkthdr, sizeof(struct archdr)); @@ -169,7 +169,7 @@ static int build_header(struct sk_buff *skb, struct net_device *dev, unsigned short type, uint8_t daddr) { int hdr_size = ARC_HDR_SIZE + RFC1051_HDR_SIZE; - struct archdr *pkt = (struct archdr *) skb_push(skb, hdr_size); + struct archdr *pkt = (struct archdr *)skb_push(skb, hdr_size); struct arc_rfc1051 *soft = &pkt->soft.rfc1051; /* set the protocol ID according to RFC1051 */ @@ -201,7 +201,7 @@ static int build_header(struct sk_buff *skb, struct net_device *dev, /* see linux/net/ethernet/eth.c to see where I got the following */ if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) { - /* + /* * FIXME: fill in the last byte of the dest ipaddr here to better * comply with RFC1051 in "noarp" mode. */ diff --git a/drivers/net/arcnet/rfc1201.c b/drivers/net/arcnet/rfc1201.c index b71431aae084..bf2a8cb3f0e2 100644 --- a/drivers/net/arcnet/rfc1201.c +++ b/drivers/net/arcnet/rfc1201.c @@ -1,6 +1,6 @@ /* * Linux ARCnet driver - RFC1201 (standard) packet encapsulation - * + * * Written 1994-1999 by Avery Pennarun. * Derived from skeleton.c by Donald Becker. * @@ -86,12 +86,12 @@ module_exit(arcnet_rfc1201_exit); /* * Determine a packet's protocol ID. - * + * * With ARCnet we have to convert everything to Ethernet-style stuff. */ static __be16 type_trans(struct sk_buff *skb, struct net_device *dev) { - struct archdr *pkt = (struct archdr *) skb->data; + struct archdr *pkt = (struct archdr *)skb->data; struct arc_rfc1201 *soft = &pkt->soft.rfc1201; int hdr_size = ARC_HDR_SIZE + RFC1201_HDR_SIZE; @@ -169,7 +169,7 @@ static void rx(struct net_device *dev, int bufnum, if (in->skb) { /* already assembling one! */ BUGMSG(D_EXTRA, "aborting assembly (seq=%d) for unsplit packet (splitflag=%d, seq=%d)\n", - in->sequence, soft->split_flag, soft->sequence); + in->sequence, soft->split_flag, soft->sequence); lp->rfc1201.aborted_seq = soft->sequence; dev_kfree_skb_irq(in->skb); dev->stats.rx_errors++; @@ -187,7 +187,7 @@ static void rx(struct net_device *dev, int bufnum, skb_put(skb, length + ARC_HDR_SIZE); skb->dev = dev; - pkt = (struct archdr *) skb->data; + pkt = (struct archdr *)skb->data; soft = &pkt->soft.rfc1201; /* up to sizeof(pkt->soft) has already been copied from the card */ @@ -203,11 +203,11 @@ static void rx(struct net_device *dev, int bufnum, * (which is impossible to fumble) and insert it ourselves. */ if (soft->proto == ARC_P_ARP) { - struct arphdr *arp = (struct arphdr *) soft->payload; + struct arphdr *arp = (struct arphdr *)soft->payload; /* make sure addresses are the right length */ if (arp->ar_hln == 1 && arp->ar_pln == 4) { - uint8_t *cptr = (uint8_t *) arp + sizeof(struct arphdr); + uint8_t *cptr = (uint8_t *)arp + sizeof(struct arphdr); if (!*cptr) { /* is saddr = 00? */ BUGMSG(D_EXTRA, @@ -274,7 +274,7 @@ static void rx(struct net_device *dev, int bufnum, dev_kfree_skb_irq(in->skb); } in->sequence = soft->sequence; - in->numpackets = ((unsigned) soft->split_flag >> 1) + 2; + in->numpackets = ((unsigned)soft->split_flag >> 1) + 2; in->lastpacket = 1; if (in->numpackets > 16) { @@ -294,7 +294,7 @@ static void rx(struct net_device *dev, int bufnum, return; } skb->dev = dev; - pkt = (struct archdr *) skb->data; + pkt = (struct archdr *)skb->data; soft = &pkt->soft.rfc1201; memcpy(pkt, pkthdr, ARC_HDR_SIZE + RFC1201_HDR_SIZE); @@ -302,7 +302,7 @@ static void rx(struct net_device *dev, int bufnum, soft->split_flag = 0; /* end result won't be split */ } else { /* not first packet */ - int packetnum = ((unsigned) soft->split_flag >> 1) + 1; + int packetnum = ((unsigned)soft->split_flag >> 1) + 1; /* * if we're not assembling, there's no point trying to @@ -341,7 +341,7 @@ static void rx(struct net_device *dev, int bufnum, in->lastpacket = in->numpackets = 0; return; } - pkt = (struct archdr *) in->skb->data; + pkt = (struct archdr *)in->skb->data; soft = &pkt->soft.rfc1201; } @@ -357,10 +357,10 @@ static void rx(struct net_device *dev, int bufnum, in->skb = NULL; in->lastpacket = in->numpackets = 0; - BUGMSG(D_SKB_SIZE, "skb: received %d bytes from %02X (unsplit)\n", - skb->len, pkt->hard.source); - BUGMSG(D_SKB_SIZE, "skb: received %d bytes from %02X (split)\n", - skb->len, pkt->hard.source); + BUGMSG(D_SKB_SIZE, "skb: received %d bytes from %02X (unsplit)\n", + skb->len, pkt->hard.source); + BUGMSG(D_SKB_SIZE, "skb: received %d bytes from %02X (split)\n", + skb->len, pkt->hard.source); BUGLVL(D_SKB) arcnet_dump_skb(dev, skb, "rx"); skb->protocol = type_trans(skb, dev); @@ -376,7 +376,7 @@ static int build_header(struct sk_buff *skb, struct net_device *dev, { struct arcnet_local *lp = netdev_priv(dev); int hdr_size = ARC_HDR_SIZE + RFC1201_HDR_SIZE; - struct archdr *pkt = (struct archdr *) skb_push(skb, hdr_size); + struct archdr *pkt = (struct archdr *)skb_push(skb, hdr_size); struct arc_rfc1201 *soft = &pkt->soft.rfc1201; /* set the protocol ID according to RFC1201 */ @@ -424,7 +424,7 @@ static int build_header(struct sk_buff *skb, struct net_device *dev, /* see linux/net/ethernet/eth.c to see where I got the following */ if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) { - /* + /* * FIXME: fill in the last byte of the dest ipaddr here to better * comply with RFC1051 in "noarp" mode. For now, always broadcasting * will probably at least get packets sent out :) @@ -517,7 +517,7 @@ static int continue_tx(struct net_device *dev, int bufnum) int seglen; BUGMSG(D_DURING, - "rfc1201 continue_tx: loading segment %d(+1) of %d (seq=%d)\n", + "rfc1201 continue_tx: loading segment %d(+1) of %d (seq=%d)\n", out->segnum, out->numsegs, soft->sequence); /* the "new" soft header comes right before the data chunk */ diff --git a/include/linux/arcdevice.h b/include/linux/arcdevice.h index df0356220730..ccfd1d2f984b 100644 --- a/include/linux/arcdevice.h +++ b/include/linux/arcdevice.h @@ -51,7 +51,7 @@ /* * Debugging bitflags: each option can be enabled individually. - * + * * Note: only debug flags included in the ARCNET_DEBUG_MAX define will * actually be available. GCC will (at least, GCC 2.7.0 will) notice * lines using a BUGLVL not in ARCNET_DEBUG_MAX and automatically optimize @@ -77,33 +77,33 @@ #endif #ifndef ARCNET_DEBUG -#define ARCNET_DEBUG (D_NORMAL|D_EXTRA) +#define ARCNET_DEBUG (D_NORMAL | D_EXTRA) #endif extern int arcnet_debug; /* macros to simplify debug checking */ -#define BUGLVL(x) if ((ARCNET_DEBUG_MAX)&arcnet_debug&(x)) -#define BUGMSG2(x,msg,args...) do { BUGLVL(x) printk(msg, ## args); } while (0) -#define BUGMSG(x,msg,args...) \ - BUGMSG2(x, "%s%6s: " msg, \ - x==D_NORMAL ? KERN_WARNING \ - : x < D_DURING ? KERN_INFO : KERN_DEBUG, \ - dev->name , ## args) +#define BUGLVL(x) if ((ARCNET_DEBUG_MAX) & arcnet_debug & (x)) +#define BUGMSG2(x, msg, args...) do { BUGLVL(x) printk(msg, ## args); } while (0) +#define BUGMSG(x, msg, args...) \ + BUGMSG2(x, "%s%6s: " msg, \ + x == D_NORMAL ? KERN_WARNING \ + : x < D_DURING ? KERN_INFO : KERN_DEBUG, \ + dev->name, ## args) /* see how long a function call takes to run, expressed in CPU cycles */ -#define TIME(name, bytes, call) BUGLVL(D_TIMING) { \ - unsigned long _x, _y; \ - _x = get_cycles(); \ - call; \ - _y = get_cycles(); \ - BUGMSG(D_TIMING, \ - "%s: %d bytes in %lu cycles == " \ - "%lu Kbytes/100Mcycle\n",\ - name, bytes, _y - _x, \ - 100000000 / 1024 * bytes / (_y - _x + 1));\ - } \ - else { \ - call;\ +#define TIME(name, bytes, call) BUGLVL(D_TIMING) { \ + unsigned long _x, _y; \ + _x = get_cycles(); \ + call; \ + _y = get_cycles(); \ + BUGMSG(D_TIMING, \ + "%s: %d bytes in %lu cycles == " \ + "%lu Kbytes/100Mcycle\n", \ + name, bytes, _y - _x, \ + 100000000 / 1024 * bytes / (_y - _x + 1)); \ + } \ + else { \ + call; \ } @@ -189,16 +189,16 @@ struct ArcProto { int mtu; /* largest possible packet */ int is_ip; /* This is a ip plugin - not a raw thing */ - void (*rx) (struct net_device * dev, int bufnum, - struct archdr * pkthdr, int length); - int (*build_header) (struct sk_buff * skb, struct net_device *dev, - unsigned short ethproto, uint8_t daddr); + void (*rx)(struct net_device *dev, int bufnum, + struct archdr *pkthdr, int length); + int (*build_header)(struct sk_buff *skb, struct net_device *dev, + unsigned short ethproto, uint8_t daddr); /* these functions return '1' if the skb can now be freed */ - int (*prepare_tx) (struct net_device * dev, struct archdr * pkt, int length, - int bufnum); - int (*continue_tx) (struct net_device * dev, int bufnum); - int (*ack_tx) (struct net_device * dev, int acked); + int (*prepare_tx)(struct net_device *dev, struct archdr *pkt, int length, + int bufnum); + int (*continue_tx)(struct net_device *dev, int bufnum); + int (*ack_tx)(struct net_device *dev, int acked); }; extern struct ArcProto *arc_proto_map[256], *arc_proto_default, @@ -263,13 +263,13 @@ struct arcnet_local { * situations in which we (for example) want to pre-load a transmit * buffer, or start receiving while we copy a received packet to * memory. - * + * * The rules: only the interrupt handler is allowed to _add_ buffers to * the queue; thus, this doesn't require a lock. Both the interrupt * handler and the transmit function will want to _remove_ buffers, so * we need to handle the situation where they try to do it at the same * time. - * + * * If next_buf == first_free_buf, the queue is empty. Since there are * only four possible buffers, the queue should never be full. */ @@ -298,17 +298,17 @@ struct arcnet_local { /* hardware-specific functions */ struct { struct module *owner; - void (*command) (struct net_device * dev, int cmd); - int (*status) (struct net_device * dev); - void (*intmask) (struct net_device * dev, int mask); - int (*reset) (struct net_device * dev, int really_reset); - void (*open) (struct net_device * dev); - void (*close) (struct net_device * dev); - - void (*copy_to_card) (struct net_device * dev, int bufnum, int offset, - void *buf, int count); - void (*copy_from_card) (struct net_device * dev, int bufnum, int offset, - void *buf, int count); + void (*command)(struct net_device *dev, int cmd); + int (*status)(struct net_device *dev); + void (*intmask)(struct net_device *dev, int mask); + int (*reset)(struct net_device *dev, int really_reset); + void (*open)(struct net_device *dev); + void (*close)(struct net_device *dev); + + void (*copy_to_card)(struct net_device *dev, int bufnum, int offset, + void *buf, int count); + void (*copy_from_card)(struct net_device *dev, int bufnum, int offset, + void *buf, int count); } hw; void __iomem *mem_start; /* pointer to ioremap'ed MMIO */ @@ -325,7 +325,7 @@ struct arcnet_local { #if ARCNET_DEBUG_MAX & D_SKB void arcnet_dump_skb(struct net_device *dev, struct sk_buff *skb, char *desc); #else -#define arcnet_dump_skb(dev,skb,desc) ; +#define arcnet_dump_skb(dev, skb, desc) ; #endif void arcnet_unregister_proto(struct ArcProto *proto); @@ -335,7 +335,7 @@ struct net_device *alloc_arcdev(const char *name); int arcnet_open(struct net_device *dev); int arcnet_close(struct net_device *dev); netdev_tx_t arcnet_send_packet(struct sk_buff *skb, - struct net_device *dev); + struct net_device *dev); void arcnet_timeout(struct net_device *dev); #endif /* __KERNEL__ */