From: Olof Johansson Date: Thu, 20 Feb 2014 08:49:19 +0000 (-0800) Subject: Merge tag 'imx6-dt-3.15' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=ca7964a247cacaf1e2b66e6e954f3cfd23f7db22;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git Merge tag 'imx6-dt-3.15' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt Merge "i.MX6 device tree changes for 3.15" from Shawn Guo: - A good number of new i.MX6 boards support: cm-fx6, dmo-edmqmx6, nitrogen6x, Gateworks Ventana gw5xxx family, DFI FS700-M60 and Zealz GK802 - Update imx6q-sabrelite device tree and add Dual Lite/Solo support - Move pins that are used by particular client device out of hog group - Use GPIO_6 for FEC interrupt to workaround a hardware bug (ERR006687 ENET: Only the ENET wake-up interrupt request can wake the system from Wait mode.) - Make pinctrl nodes board specific to avoid floating board specific device tree blob with so many unused pinctrl data - Use generic node name for fixed regulator - Update OPP table for cpufreq support - Random updates on various board device tree sources, adding pinctrl settings, device nodes, properties, etc. * tag 'imx6-dt-3.15' of git://git.linaro.org/people/shawnguo/linux-2.6: (62 commits) ARM: dts: imx6q: Add support for Zealz GK802 ARM: dts: imx6: Add DFI FS700-M60 board support ARM: dts: imx6: use imx51-ssi ARM: dts: imx6qdl: Add mmc aliases ARM: dts: imx6q: Add spi4 alias ARM: dts: imx6qdl-sabreauto: Add LVDS support ARM: dts: imx6sl: add keypad support for i.mx6sl-evk board. ARM: dts: imx6sl: add ocram device support ARM: dts: imx6qdl: enable dma for spi ARM: dts: imx6qdl-sabresd: Add PFUZE100 support ARM: dts: imx6: add mxs phy controller id ARM: dts: imx6: add anatop phandle for usbphy ARM: dts: imx6q-arm2: use GPIO_6 for FEC interrupt. ARM: dts: imx6qdl-sabreauto: use GPIO_6 for FEC interrupt. ARM: dts: imx6qdl-sabrelite: use GPIO_6 for FEC interrupt. ARM: dts: imx6qdl: use interrupts-extended for fec ARM: dts: imx: pinfunc: add MX6QDL_PAD_GPIO_6__ENET_IRQ ARM: dts: imx6q-sabrelite: PHY reset is active-low ARM: dts: imx6: Use 'vddarm' as the regulator name ARM: dts: imx6qdl-sabresd: Add power key support ... --- ca7964a247cacaf1e2b66e6e954f3cfd23f7db22