From: Hans de Goede <hdegoede@redhat.com>
Date: Sat, 1 Mar 2014 19:26:28 +0000 (+0100)
Subject: ARM: sun4i: dt: Add USB host nodes to hackberry dts
X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=ca78c26c0b58fe1f1da7cdb3a5a18971b3897c5d;p=GitHub%2Fexynos8895%2Fandroid_kernel_samsung_universal8895.git

ARM: sun4i: dt: Add USB host nodes to hackberry dts

Add nodes for the usb-phy and ehci- and ohci-usb-host controllers.

Based on fex file settings, the fex file also contains a mysterious line:
usb_hub_vcc_en_gpio = port:PB09<1><0><default><0>

Which also clashes with usbc0, which has:
usb_drv_vbus_gpio = port:PB09<1><0><default><0>

So if usb does not work properly we need someone with a hackberry to look
closer into this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---

diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
index 6692d336335d..d7c17e46ce23 100644
--- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
@@ -13,6 +13,7 @@
 
 /dts-v1/;
 /include/ "sun4i-a10.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
 
 / {
 	model = "Miniand Hackberry";
@@ -35,6 +36,28 @@
 			};
 		};
 
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
 		pio: pinctrl@01c20800 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&hackberry_hogs>;
@@ -45,6 +68,13 @@
 				allwinner,drive = <0>;
 				allwinner,pull = <0>;
 			};
+
+			usb2_vbus_pin_hackberry: usb2_vbus_pin@0 {
+					allwinner,pins = "PH12";
+					allwinner,function = "gpio_out";
+					allwinner,drive = <0>;
+					allwinner,pull = <0>;
+			};
 		};
 
 		uart0: serial@01c28000 {
@@ -62,4 +92,14 @@
 		enable-active-high;
 		gpio = <&pio 7 19 0>;
 	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		pinctrl-0 = <&usb2_vbus_pin_hackberry>;
+		gpio = <&pio 7 12 0>;
+		status = "okay";
+	};
 };