From: David VomLehn Date: Fri, 21 May 2010 18:25:36 +0000 (-0700) Subject: MIPS: PowerTV: Use O(1) algorthm for phys_to_dma/dma_to_phys X-Git-Tag: MMI-PSA29.97-13-9~23084^2~140 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=ca36c36b7821b573fe06ce6bc34db03b557f3ce4;p=GitHub%2FMotorolaMobilityLLC%2Fkernel-slsi.git MIPS: PowerTV: Use O(1) algorthm for phys_to_dma/dma_to_phys Replace phys_to_dma()/dma_to_phys() looping algorithm with an O(1) algorithm The approach taken is inspired by the sparse memory implementation: take a certain number of high-order bits off the address them, use this as an index into a table containing an offset to the desired address and add it to the original value. There is a table for mapping physical addresses to DMA addresses and another one for the reverse mapping. The table sizes depend on how fine-grained the mappings need to be; Coarser granularity less to smaller tables. On a processor with 32-bit physical and DMA addresses, with 4 MIB granularity, memory usage is two 2048-byte arrays. Each 32-byte cache line thus covers 64 MiB of address space. Also, renames phys_to_bus() to phys_to_dma() and bus_to_phys() to dma_to_phys() to align with kernel usage. [Ralf: Fixed silly build breakage due to stackoverflow warning caused by huge array on stack.] Signed-off-by: David VomLehn To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1257/ Signed-off-by: Ralf Baechle --- diff --git a/arch/mips/include/asm/mach-powertv/dma-coherence.h b/arch/mips/include/asm/mach-powertv/dma-coherence.h index 5b8d5ebeb838..f76029c2406e 100644 --- a/arch/mips/include/asm/mach-powertv/dma-coherence.h +++ b/arch/mips/include/asm/mach-powertv/dma-coherence.h @@ -65,21 +65,21 @@ static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size) { if (is_kseg2(addr)) - return phys_to_bus(virt_to_phys_from_pte(addr)); + return phys_to_dma(virt_to_phys_from_pte(addr)); else - return phys_to_bus(virt_to_phys(addr)); + return phys_to_dma(virt_to_phys(addr)); } static inline dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page) { - return phys_to_bus(page_to_phys(page)); + return phys_to_dma(page_to_phys(page)); } static inline unsigned long plat_dma_addr_to_phys(struct device *dev, dma_addr_t dma_addr) { - return bus_to_phys(dma_addr); + return dma_to_phys(dma_addr); } static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr, diff --git a/arch/mips/include/asm/mach-powertv/ioremap.h b/arch/mips/include/asm/mach-powertv/ioremap.h index e6276d5146e8..076f2eeaa575 100644 --- a/arch/mips/include/asm/mach-powertv/ioremap.h +++ b/arch/mips/include/asm/mach-powertv/ioremap.h @@ -10,64 +10,101 @@ #define __ASM_MACH_POWERTV_IOREMAP_H #include +#include +#include -#define LOW_MEM_BOUNDARY_PHYS 0x20000000 -#define LOW_MEM_BOUNDARY_MASK (~(LOW_MEM_BOUNDARY_PHYS - 1)) +#include +#include + +/* We're going to mess with bits, so get sizes */ +#define IOR_BPC 8 /* Bits per char */ +#define IOR_PHYS_BITS (IOR_BPC * sizeof(phys_addr_t)) +#define IOR_DMA_BITS (IOR_BPC * sizeof(dma_addr_t)) /* - * The bus addresses are different than the physical addresses that - * the processor sees by an offset. This offset varies by ASIC - * version. Define a variable to hold the offset and some macros to - * make the conversion simpler. */ -extern unsigned long phys_to_bus_offset; - -#ifdef CONFIG_HIGHMEM -#define MEM_GAP_PHYS 0x60000000 + * Define the granularity of physical/DMA mapping in terms of the number + * of bits that defines the offset within a grain. These will be the + * least significant bits of the address. The rest of a physical or DMA + * address will be used to index into an appropriate table to find the + * offset to add to the address to yield the corresponding DMA or physical + * address, respectively. + */ +#define IOR_LSBITS 22 /* Bits in a grain */ + /* - * TODO: We will use the hard code for conversion between physical and - * bus until the bootloader releases their device tree to us. + * Compute the number of most significant address bits after removing those + * used for the offset within a grain and then compute the number of table + * entries for the conversion. */ -#define phys_to_bus(x) (((x) < LOW_MEM_BOUNDARY_PHYS) ? \ - ((x) + phys_to_bus_offset) : (x)) -#define bus_to_phys(x) (((x) < MEM_GAP_PHYS_ADDR) ? \ - ((x) - phys_to_bus_offset) : (x)) -#else -#define phys_to_bus(x) ((x) + phys_to_bus_offset) -#define bus_to_phys(x) ((x) - phys_to_bus_offset) -#endif +#define IOR_PHYS_MSBITS (IOR_PHYS_BITS - IOR_LSBITS) +#define IOR_NUM_PHYS_TO_DMA ((phys_addr_t) 1 << IOR_PHYS_MSBITS) + +#define IOR_DMA_MSBITS (IOR_DMA_BITS - IOR_LSBITS) +#define IOR_NUM_DMA_TO_PHYS ((dma_addr_t) 1 << IOR_DMA_MSBITS) /* - * Determine whether the address we are given is for an ASIC device - * Params: addr Address to check - * Returns: Zero if the address is not for ASIC devices, non-zero - * if it is. + * Define data structures used as elements in the arrays for the conversion + * between physical and DMA addresses. We do some slightly fancy math to + * compute the width of the offset element of the conversion tables so + * that we can have the smallest conversion tables. Next, round up the + * sizes to the next higher power of two, i.e. the offset element will have + * 8, 16, 32, 64, etc. bits. This eliminates the need to mask off any + * bits. Finally, we compute a shift value that puts the most significant + * bits of the offset into the most significant bits of the offset element. + * This makes it more efficient on processors without barrel shifters and + * easier to see the values if the conversion table is dumped in binary. */ -static inline int asic_is_device_addr(phys_t addr) +#define _IOR_OFFSET_WIDTH(n) (1 << order_base_2(n)) +#define IOR_OFFSET_WIDTH(n) \ + (_IOR_OFFSET_WIDTH(n) < 8 ? 8 : _IOR_OFFSET_WIDTH(n)) + +#define IOR_PHYS_OFFSET_BITS IOR_OFFSET_WIDTH(IOR_PHYS_MSBITS) +#define IOR_PHYS_SHIFT (IOR_PHYS_BITS - IOR_PHYS_OFFSET_BITS) + +#define IOR_DMA_OFFSET_BITS IOR_OFFSET_WIDTH(IOR_DMA_MSBITS) +#define IOR_DMA_SHIFT (IOR_DMA_BITS - IOR_DMA_OFFSET_BITS) + +struct ior_phys_to_dma { + dma_addr_t offset:IOR_DMA_OFFSET_BITS __packed + __aligned((IOR_DMA_OFFSET_BITS / IOR_BPC)); +}; + +struct ior_dma_to_phys { + dma_addr_t offset:IOR_PHYS_OFFSET_BITS __packed + __aligned((IOR_PHYS_OFFSET_BITS / IOR_BPC)); +}; + +extern struct ior_phys_to_dma _ior_phys_to_dma[IOR_NUM_PHYS_TO_DMA]; +extern struct ior_dma_to_phys _ior_dma_to_phys[IOR_NUM_DMA_TO_PHYS]; + +static inline dma_addr_t _phys_to_dma_offset_raw(phys_addr_t phys) { - return !((phys_t)addr & (phys_t) LOW_MEM_BOUNDARY_MASK); + return (dma_addr_t)_ior_phys_to_dma[phys >> IOR_LSBITS].offset; } -/* - * Determine whether the address we are given is external RAM mappable - * into KSEG1. - * Params: addr Address to check - * Returns: Zero if the address is not for external RAM and - */ -static inline int asic_is_lowmem_ram_addr(phys_t addr) +static inline dma_addr_t _dma_to_phys_offset_raw(dma_addr_t dma) { - /* - * The RAM always starts at the following address in the processor's - * physical address space - */ - static const phys_t phys_ram_base = 0x10000000; - phys_t bus_ram_base; + return (dma_addr_t)_ior_dma_to_phys[dma >> IOR_LSBITS].offset; +} - bus_ram_base = phys_to_bus_offset + phys_ram_base; +/* These are not portable and should not be used in drivers. Drivers should + * be using ioremap() and friends to map physical addreses to virtual + * addresses and dma_map*() and friends to map virtual addresses into DMA + * addresses and back. + */ +static inline dma_addr_t phys_to_dma(phys_addr_t phys) +{ + return phys + (_phys_to_dma_offset_raw(phys) << IOR_PHYS_SHIFT); +} - return addr >= bus_ram_base && - addr < (bus_ram_base + (LOW_MEM_BOUNDARY_PHYS - phys_ram_base)); +static inline phys_addr_t dma_to_phys(dma_addr_t dma) +{ + return dma + (_dma_to_phys_offset_raw(dma) << IOR_DMA_SHIFT); } +extern void ioremap_add_map(dma_addr_t phys, phys_addr_t alias, + dma_addr_t size); + /* * Allow physical addresses to be fixed up to help peripherals located * outside the low 32-bit range -- generic pass-through version. @@ -77,10 +114,50 @@ static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size) return phys_addr; } -static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size, +/* + * Handle the special case of addresses the area aliased into the first + * 512 MiB of the processor's physical address space. These turn into either + * kseg0 or kseg1 addresses, depending on flags. + */ +static inline void __iomem *plat_ioremap(phys_t start, unsigned long size, unsigned long flags) { - return NULL; + phys_addr_t start_offset; + void __iomem *result = NULL; + + /* Start by checking to see whether this is an aliased address */ + start_offset = _dma_to_phys_offset_raw(start); + + /* + * If: + * o the memory is aliased into the first 512 MiB, and + * o the start and end are in the same RAM bank, and + * o we don't have a zero size or wrap around, and + * o we are supposed to create an uncached mapping, + * handle this is a kseg0 or kseg1 address + */ + if (start_offset != 0) { + phys_addr_t last; + dma_addr_t dma_to_phys_offset; + + last = start + size - 1; + dma_to_phys_offset = + _dma_to_phys_offset_raw(last) << IOR_DMA_SHIFT; + + if (dma_to_phys_offset == start_offset && + size != 0 && start <= last) { + phys_t adjusted_start; + adjusted_start = start + start_offset; + if (flags == _CACHE_UNCACHED) + result = (void __iomem *) (unsigned long) + CKSEG1ADDR(adjusted_start); + else + result = (void __iomem *) (unsigned long) + CKSEG0ADDR(adjusted_start); + } + } + + return result; } static inline int plat_iounmap(const volatile void __iomem *addr) diff --git a/arch/mips/powertv/Makefile b/arch/mips/powertv/Makefile index 0a0d73c0564f..e9fe1c6efe16 100644 --- a/arch/mips/powertv/Makefile +++ b/arch/mips/powertv/Makefile @@ -23,6 +23,7 @@ # under Linux. # -obj-y += init.o memory.o reset.o time.o powertv_setup.o asic/ pci/ +obj-y += init.o ioremap.o memory.o powertv_setup.o reset.o time.o \ + asic/ pci/ EXTRA_CFLAGS += -Wall -Werror diff --git a/arch/mips/powertv/asic/asic_devices.c b/arch/mips/powertv/asic/asic_devices.c index 9ec523e4dd06..c81dd497ed7b 100644 --- a/arch/mips/powertv/asic/asic_devices.c +++ b/arch/mips/powertv/asic/asic_devices.c @@ -80,8 +80,8 @@ static bool usb_configured; * Don't recommend to use it directly, it is usually used by kernel internally. * Portable code should be using interfaces such as ioremp, dma_map_single, etc. */ -unsigned long phys_to_bus_offset; -EXPORT_SYMBOL(phys_to_bus_offset); +unsigned long phys_to_dma_offset; +EXPORT_SYMBOL(phys_to_dma_offset); /* * @@ -533,10 +533,10 @@ void __init configure_platform(void) switch (asic) { case ASIC_ZEUS: - phys_to_bus_offset = 0x30000000; + phys_to_dma_offset = 0x30000000; break; case ASIC_CALLIOPE: - phys_to_bus_offset = 0x10000000; + phys_to_dma_offset = 0x10000000; break; case ASIC_CRONUSLITE: /* Fall through */ @@ -546,10 +546,10 @@ void __init configure_platform(void) * 0x2XXXXXXX. If 0x10000000 aliases into 0x60000000- * 0x6XXXXXXX, the offset should be 0x50000000, not 0x10000000. */ - phys_to_bus_offset = 0x10000000; + phys_to_dma_offset = 0x10000000; break; default: - phys_to_bus_offset = 0x00000000; + phys_to_dma_offset = 0x00000000; break; } } @@ -603,7 +603,7 @@ void __init platform_alloc_bootmem(void) int size = gp_resources[i].end - gp_resources[i].start + 1; if ((gp_resources[i].start != 0) && ((gp_resources[i].flags & IORESOURCE_MEM) != 0)) { - reserve_bootmem(bus_to_phys(gp_resources[i].start), + reserve_bootmem(dma_to_phys(gp_resources[i].start), size, 0); total += gp_resources[i].end - gp_resources[i].start + 1; @@ -627,7 +627,7 @@ void __init platform_alloc_bootmem(void) else { gp_resources[i].start = - phys_to_bus(virt_to_phys(mem)); + phys_to_dma(virt_to_phys(mem)); gp_resources[i].end = gp_resources[i].start + size - 1; total += size; @@ -691,7 +691,7 @@ static void __init pmem_setup_resource(void) if (resource && pmemaddr && pmemlen) { /* The address provided by bootloader is in kseg0. Convert to * a bus address. */ - resource->start = phys_to_bus(pmemaddr - 0x80000000); + resource->start = phys_to_dma(pmemaddr - 0x80000000); resource->end = resource->start + pmemlen - 1; pr_info("persistent memory: start=0x%x end=0x%x\n", diff --git a/arch/mips/powertv/ioremap.c b/arch/mips/powertv/ioremap.c new file mode 100644 index 000000000000..a77c6f62fe23 --- /dev/null +++ b/arch/mips/powertv/ioremap.c @@ -0,0 +1,136 @@ +/* + * ioremap.c + * + * Support for mapping between dma_addr_t values a phys_addr_t values. + * + * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: David VomLehn + * + * Description: Defines the platform resources for the SA settop. + * + * NOTE: The bootloader allocates persistent memory at an address which is + * 16 MiB below the end of the highest address in KSEG0. All fixed + * address memory reservations must avoid this region. + */ + +#include +#include + +#include + +/* + * Define the sizes of and masks for grains in physical and DMA space. The + * values are the same but the types are not. + */ +#define IOR_PHYS_GRAIN ((phys_addr_t) 1 << IOR_LSBITS) +#define IOR_PHYS_GRAIN_MASK (IOR_PHYS_GRAIN - 1) + +#define IOR_DMA_GRAIN ((dma_addr_t) 1 << IOR_LSBITS) +#define IOR_DMA_GRAIN_MASK (IOR_DMA_GRAIN - 1) + +/* + * Values that, when accessed by an index derived from a phys_addr_t and + * added to phys_addr_t value, yield a DMA address + */ +struct ior_phys_to_dma _ior_phys_to_dma[IOR_NUM_PHYS_TO_DMA]; +EXPORT_SYMBOL(_ior_phys_to_dma); + +/* + * Values that, when accessed by an index derived from a dma_addr_t and + * added to that dma_addr_t value, yield a physical address + */ +struct ior_dma_to_phys _ior_dma_to_phys[IOR_NUM_DMA_TO_PHYS]; +EXPORT_SYMBOL(_ior_dma_to_phys); + +/** + * setup_dma_to_phys - set up conversion from DMA to physical addresses + * @dma_idx: Top IOR_LSBITS bits of the DMA address, i.e. an index + * into the array _dma_to_phys. + * @delta: Value that, when added to the DMA address, will yield the + * physical address + * @s: Number of bytes in the section of memory with the given delta + * between DMA and physical addresses. + */ +static void setup_dma_to_phys(dma_addr_t dma, phys_addr_t delta, dma_addr_t s) +{ + int dma_idx, first_idx, last_idx; + phys_addr_t first, last; + + /* + * Calculate the first and last indices, rounding the first up and + * the second down. + */ + first = dma & ~IOR_DMA_GRAIN_MASK; + last = (dma + s - 1) & ~IOR_DMA_GRAIN_MASK; + first_idx = first >> IOR_LSBITS; /* Convert to indices */ + last_idx = last >> IOR_LSBITS; + + for (dma_idx = first_idx; dma_idx <= last_idx; dma_idx++) + _ior_dma_to_phys[dma_idx].offset = delta >> IOR_DMA_SHIFT; +} + +/** + * setup_phys_to_dma - set up conversion from DMA to physical addresses + * @phys_idx: Top IOR_LSBITS bits of the DMA address, i.e. an index + * into the array _phys_to_dma. + * @delta: Value that, when added to the DMA address, will yield the + * physical address + * @s: Number of bytes in the section of memory with the given delta + * between DMA and physical addresses. + */ +static void setup_phys_to_dma(phys_addr_t phys, dma_addr_t delta, phys_addr_t s) +{ + int phys_idx, first_idx, last_idx; + phys_addr_t first, last; + + /* + * Calculate the first and last indices, rounding the first up and + * the second down. + */ + first = phys & ~IOR_PHYS_GRAIN_MASK; + last = (phys + s - 1) & ~IOR_PHYS_GRAIN_MASK; + first_idx = first >> IOR_LSBITS; /* Convert to indices */ + last_idx = last >> IOR_LSBITS; + + for (phys_idx = first_idx; phys_idx <= last_idx; phys_idx++) + _ior_phys_to_dma[phys_idx].offset = delta >> IOR_PHYS_SHIFT; +} + +/** + * ioremap_add_map - add to the physical and DMA address conversion arrays + * @phys: Process's view of the address of the start of the memory chunk + * @dma: DMA address of the start of the memory chunk + * @size: Size, in bytes, of the chunk of memory + * + * NOTE: It might be obvious, but the assumption is that all @size bytes have + * the same offset between the physical address and the DMA address. + */ +void ioremap_add_map(phys_addr_t phys, phys_addr_t dma, phys_addr_t size) +{ + if (size == 0) + return; + + if ((dma & IOR_DMA_GRAIN_MASK) != 0 || + (phys & IOR_PHYS_GRAIN_MASK) != 0 || + (size & IOR_PHYS_GRAIN_MASK) != 0) + pr_crit("Memory allocation must be in chunks of 0x%x bytes\n", + IOR_PHYS_GRAIN); + + setup_dma_to_phys(dma, phys - dma, size); + setup_phys_to_dma(phys, dma - phys, size); +} diff --git a/arch/mips/powertv/memory.c b/arch/mips/powertv/memory.c index f49eb3d0358b..73880ad29bc2 100644 --- a/arch/mips/powertv/memory.c +++ b/arch/mips/powertv/memory.c @@ -30,28 +30,141 @@ #include #include +#include +#include #include "init.h" /* Memory constants */ #define KIBIBYTE(n) ((n) * 1024) /* Number of kibibytes */ #define MEBIBYTE(n) ((n) * KIBIBYTE(1024)) /* Number of mebibytes */ -#define DEFAULT_MEMSIZE MEBIBYTE(256) /* If no memsize provided */ -#define LOW_MEM_MAX MEBIBYTE(252) /* Max usable low mem */ -#define RES_BOOTLDR_MEMSIZE MEBIBYTE(1) /* Memory reserved for bldr */ -#define BOOT_MEM_SIZE KIBIBYTE(256) /* Memory reserved for bldr */ -#define PHYS_MEM_START 0x10000000 /* Start of physical memory */ +#define DEFAULT_MEMSIZE MEBIBYTE(128) /* If no memsize provided */ -char __initdata cmdline[COMMAND_LINE_SIZE]; +#define BLDR_SIZE KIBIBYTE(256) /* Memory reserved for bldr */ +#define RV_SIZE MEBIBYTE(4) /* Size of reset vector */ -void __init prom_meminit(void) +#define LOW_MEM_END 0x20000000 /* Highest low memory address */ +#define BLDR_ALIAS 0x10000000 /* Bootloader address */ +#define RV_PHYS 0x1fc00000 /* Reset vector address */ +#define LOW_RAM_END RV_PHYS /* End of real RAM in low mem */ + +/* + * Very low-level conversion from processor physical address to device + * DMA address for the first bank of memory. + */ +#define PHYS_TO_DMA(paddr) ((paddr) + (CONFIG_LOW_RAM_DMA - LOW_RAM_ALIAS)) + +unsigned long ptv_memsize; + +/* + * struct low_mem_reserved - Items in low memmory that are reserved + * @start: Physical address of item + * @size: Size, in bytes, of this item + * @is_aliased: True if this is RAM aliased from another location. If false, + * it is something other than aliased RAM and the RAM in the + * unaliased address is still visible outside of low memory. + */ +struct low_mem_reserved { + phys_addr_t start; + phys_addr_t size; + bool is_aliased; +}; + +/* + * Must be in ascending address order + */ +struct low_mem_reserved low_mem_reserved[] = { + {BLDR_ALIAS, BLDR_SIZE, true}, /* Bootloader RAM */ + {RV_PHYS, RV_SIZE, false}, /* Reset vector */ +}; + +/* + * struct mem_layout - layout of a piece of the system RAM + * @phys: Physical address of the start of this piece of RAM. This is the + * address at which both the processor and I/O devices see the + * RAM. + * @alias: Alias of this piece of memory in order to make it appear in + * the low memory part of the processor's address space. I/O + * devices don't see anything here. + * @size: Size, in bytes, of this piece of RAM + */ +struct mem_layout { + phys_addr_t phys; + phys_addr_t alias; + phys_addr_t size; +}; + +/* + * struct mem_layout_list - list descriptor for layouts of system RAM pieces + * @family: Specifies the family being described + * @n: Number of &struct mem_layout elements + * @layout: Pointer to the list of &mem_layout structures + */ +struct mem_layout_list { + enum family_type family; + size_t n; + struct mem_layout *layout; +}; + +static struct mem_layout f1500_layout[] = { + {0x20000000, 0x10000000, MEBIBYTE(256)}, +}; + +static struct mem_layout f4500_layout[] = { + {0x40000000, 0x10000000, MEBIBYTE(256)}, + {0x20000000, 0x20000000, MEBIBYTE(32)}, +}; + +static struct mem_layout f8500_layout[] = { + {0x40000000, 0x10000000, MEBIBYTE(256)}, + {0x20000000, 0x20000000, MEBIBYTE(32)}, + {0x30000000, 0x30000000, MEBIBYTE(32)}, +}; + +static struct mem_layout fx600_layout[] = { + {0x20000000, 0x10000000, MEBIBYTE(256)}, + {0x60000000, 0x60000000, MEBIBYTE(128)}, +}; + +static struct mem_layout_list layout_list[] = { + {FAMILY_1500, ARRAY_SIZE(f1500_layout), f1500_layout}, + {FAMILY_1500VZE, ARRAY_SIZE(f1500_layout), f1500_layout}, + {FAMILY_1500VZF, ARRAY_SIZE(f1500_layout), f1500_layout}, + {FAMILY_4500, ARRAY_SIZE(f4500_layout), f4500_layout}, + {FAMILY_8500, ARRAY_SIZE(f8500_layout), f8500_layout}, + {FAMILY_8500RNG, ARRAY_SIZE(f8500_layout), f8500_layout}, + {FAMILY_4600, ARRAY_SIZE(fx600_layout), fx600_layout}, + {FAMILY_4600VZA, ARRAY_SIZE(fx600_layout), fx600_layout}, + {FAMILY_8600, ARRAY_SIZE(fx600_layout), fx600_layout}, + {FAMILY_8600VZB, ARRAY_SIZE(fx600_layout), fx600_layout}, +}; + +/* If we can't determine the layout, use this */ +static struct mem_layout default_layout[] = { + {0x20000000, 0x10000000, MEBIBYTE(128)}, +}; + +/** + * register_non_ram - register low memory not available for RAM usage + */ +static __init void register_non_ram(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(low_mem_reserved); i++) + add_memory_region(low_mem_reserved[i].start, + low_mem_reserved[i].size, BOOT_MEM_RESERVED); +} + +/** + * get_memsize - get the size of memory as a single bank + */ +static phys_addr_t get_memsize(void) { + static char cmdline[COMMAND_LINE_SIZE] __initdata; + phys_addr_t memsize = 0; char *memsize_str; - unsigned long memsize = 0; - unsigned int physend; char *ptr; - int low_mem; - int high_mem; /* Check the command line first for a memsize directive */ strcpy(cmdline, arcs_cmdline); @@ -73,96 +186,156 @@ void __init prom_meminit(void) if (memsize == 0) { if (_prom_memsize != 0) { memsize = _prom_memsize; - pr_info("_prom_memsize = 0x%lx\n", memsize); + pr_info("_prom_memsize = 0x%x\n", memsize); /* add in memory that the bootloader doesn't * report */ - memsize += BOOT_MEM_SIZE; + memsize += BLDR_SIZE; } else { memsize = DEFAULT_MEMSIZE; pr_info("Memsize not passed by bootloader, " - "defaulting to 0x%lx\n", memsize); + "defaulting to 0x%x\n", memsize); } } } - physend = PFN_ALIGN(&_end) - 0x80000000; - if (memsize > LOW_MEM_MAX) { - low_mem = LOW_MEM_MAX; - high_mem = memsize - low_mem; - } else { - low_mem = memsize; - high_mem = 0; + return memsize; +} + +/** + * register_low_ram - register an aliased section of RAM + * @p: Alias address of memory + * @n: Number of bytes in this section of memory + * + * Returns the number of bytes registered + * + */ +static __init phys_addr_t register_low_ram(phys_addr_t p, phys_addr_t n) +{ + phys_addr_t s; + int i; + phys_addr_t orig_n; + + orig_n = n; + + BUG_ON(p + n > RV_PHYS); + + for (i = 0; n != 0 && i < ARRAY_SIZE(low_mem_reserved); i++) { + phys_addr_t start; + phys_addr_t size; + + start = low_mem_reserved[i].start; + size = low_mem_reserved[i].size; + + /* Handle memory before this low memory section */ + if (p < start) { + phys_addr_t s; + s = min(n, start - p); + add_memory_region(p, s, BOOT_MEM_RAM); + p += s; + n -= s; + } + + /* Handle the low memory section itself. If it's aliased, + * we reduce the number of byes left, but if not, the RAM + * is available elsewhere and we don't reduce the number of + * bytes remaining. */ + if (p == start) { + if (low_mem_reserved[i].is_aliased) { + s = min(n, size); + n -= s; + p += s; + } else + p += n; + } } + return orig_n - n; +} + /* - * TODO: We will use the hard code for memory configuration until - * the bootloader releases their device tree to us. + * register_ram - register real RAM + * @p: Address of memory as seen by devices + * @alias: If the memory is seen at an additional address by the processor, + * this will be the address, otherwise it is the same as @p. + * @n: Number of bytes in this section of memory */ +static __init void register_ram(phys_addr_t p, phys_addr_t alias, + phys_addr_t n) +{ /* - * Add the memory reserved for use by the bootloader to the - * memory map. - */ - add_memory_region(PHYS_MEM_START, RES_BOOTLDR_MEMSIZE, - BOOT_MEM_RESERVED); -#ifdef CONFIG_HIGHMEM_256_128 - /* - * Add memory in low for general use by the kernel and its friends - * (like drivers, applications, etc). - */ - add_memory_region(PHYS_MEM_START + RES_BOOTLDR_MEMSIZE, - LOW_MEM_MAX - RES_BOOTLDR_MEMSIZE, BOOT_MEM_RAM); - /* - * Add the memory reserved for reset vector. - */ - add_memory_region(0x1fc00000, MEBIBYTE(4), BOOT_MEM_RESERVED); - /* - * Add the memory reserved. - */ - add_memory_region(0x20000000, MEBIBYTE(1024 + 75), BOOT_MEM_RESERVED); - /* - * Add memory in high for general use by the kernel and its friends - * (like drivers, applications, etc). - * - * 75MB is reserved for devices which are using the memory in high. - */ - add_memory_region(0x60000000 + MEBIBYTE(75), MEBIBYTE(128 - 75), - BOOT_MEM_RAM); -#elif defined CONFIG_HIGHMEM_128_128 - /* - * Add memory in low for general use by the kernel and its friends - * (like drivers, applications, etc). - */ - add_memory_region(PHYS_MEM_START + RES_BOOTLDR_MEMSIZE, - MEBIBYTE(128) - RES_BOOTLDR_MEMSIZE, BOOT_MEM_RAM); - /* - * Add the memory reserved. - */ - add_memory_region(PHYS_MEM_START + MEBIBYTE(128), - MEBIBYTE(128 + 1024 + 75), BOOT_MEM_RESERVED); - /* - * Add memory in high for general use by the kernel and its friends - * (like drivers, applications, etc). - * - * 75MB is reserved for devices which are using the memory in high. - */ - add_memory_region(0x60000000 + MEBIBYTE(75), MEBIBYTE(128 - 75), - BOOT_MEM_RAM); -#else - /* Add low memory regions for either: - * - no-highmemory configuration case -OR- - * - highmemory "HIGHMEM_LOWBANK_ONLY" case - */ - /* - * Add memory for general use by the kernel and its friends - * (like drivers, applications, etc). + * If some or all of this memory has an alias, break it into the + * aliased and non-aliased portion. */ - add_memory_region(PHYS_MEM_START + RES_BOOTLDR_MEMSIZE, - low_mem - RES_BOOTLDR_MEMSIZE, BOOT_MEM_RAM); + if (p != alias) { + phys_addr_t alias_size; + phys_addr_t registered; + + alias_size = min(n, LOW_RAM_END - alias); + registered = register_low_ram(alias, alias_size); + ioremap_add_map(alias, p, n); + n -= registered; + p += registered; + } + +#ifdef CONFIG_HIGHMEM + if (n != 0) { + add_memory_region(p, n, BOOT_MEM_RAM); + ioremap_add_map(p, p, n); + } +#endif +} + +/** + * register_address_space - register things in the address space + * @memsize: Number of bytes of RAM installed + * + * Takes the given number of bytes of RAM and registers as many of the regions, + * or partial regions, as it can. So, the default configuration might have + * two regions with 256 MiB each. If the memsize passed in on the command line + * is 384 MiB, it will register the first region with 256 MiB and the second + * with 128 MiB. + */ +static __init void register_address_space(phys_addr_t memsize) +{ + int i; + phys_addr_t size; + size_t n; + struct mem_layout *layout; + enum family_type family; + /* - * Add the memory reserved for reset vector. + * Register all of the things that aren't available to the kernel as + * memory. */ - add_memory_region(0x1fc00000, MEBIBYTE(4), BOOT_MEM_RESERVED); -#endif + register_non_ram(); + + /* Find the appropriate memory description */ + family = platform_get_family(); + + for (i = 0; i < ARRAY_SIZE(layout_list); i++) { + if (layout_list[i].family == family) + break; + } + + if (i == ARRAY_SIZE(layout_list)) { + n = ARRAY_SIZE(default_layout); + layout = default_layout; + } else { + n = layout_list[i].n; + layout = layout_list[i].layout; + } + + for (i = 0; memsize != 0 && i < n; i++) { + size = min(memsize, layout[i].size); + register_ram(layout[i].phys, layout[i].alias, size); + memsize -= size; + } +} + +void __init prom_meminit(void) +{ + ptv_memsize = get_memsize(); + register_address_space(ptv_memsize); } void __init prom_free_prom_memory(void)