From: Pavel Machek Date: Sat, 3 Sep 2005 22:56:57 +0000 (-0700) Subject: [PATCH] swsusp: switch pm_message_t to struct X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=ca078bae813dd46c0f9b102fdfb4a3384641ff48;p=GitHub%2Fmt8127%2Fandroid_kernel_alcatel_ttab.git [PATCH] swsusp: switch pm_message_t to struct This adds type-checking to pm_message_t, so that people can't confuse it with int or u32. It also allows us to fix "disk yoyo" during suspend (disk spinning down/up/down). [We've tried that before; since that cpufreq problems were fixed and I've tried make allyes config and fixed resulting damage.] Signed-off-by: Pavel Machek Signed-off-by: Alexander Nyberg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/arch/ppc/syslib/of_device.c b/arch/ppc/syslib/of_device.c index 1eb4f726ca9f..da8a0f2128dc 100644 --- a/arch/ppc/syslib/of_device.c +++ b/arch/ppc/syslib/of_device.c @@ -105,7 +105,7 @@ static int of_device_remove(struct device *dev) return 0; } -static int of_device_suspend(struct device *dev, u32 state) +static int of_device_suspend(struct device *dev, pm_message_t state) { struct of_device * of_dev = to_of_device(dev); struct of_platform_driver * drv = to_of_platform_driver(dev->driver); diff --git a/drivers/base/power/resume.c b/drivers/base/power/resume.c index bdd96b03b885..0a7aa07b9a2a 100644 --- a/drivers/base/power/resume.c +++ b/drivers/base/power/resume.c @@ -26,11 +26,11 @@ int resume_device(struct device * dev) down(&dev->sem); if (dev->power.pm_parent - && dev->power.pm_parent->power.power_state) { + && dev->power.pm_parent->power.power_state.event) { dev_err(dev, "PM: resume from %d, parent %s still %d\n", - dev->power.power_state, + dev->power.power_state.event, dev->power.pm_parent->bus_id, - dev->power.pm_parent->power.power_state); + dev->power.pm_parent->power.power_state.event); } if (dev->bus && dev->bus->resume) { dev_dbg(dev,"resuming\n"); @@ -54,7 +54,7 @@ void dpm_resume(void) list_add_tail(entry, &dpm_active); up(&dpm_list_sem); - if (!dev->power.prev_state) + if (!dev->power.prev_state.event) resume_device(dev); down(&dpm_list_sem); put_device(dev); diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index 325962d80191..e8f0519f5dfa 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -13,10 +13,10 @@ static void runtime_resume(struct device * dev) { dev_dbg(dev, "resuming\n"); - if (!dev->power.power_state) + if (!dev->power.power_state.event) return; if (!resume_device(dev)) - dev->power.power_state = 0; + dev->power.power_state = PMSG_ON; } @@ -49,10 +49,10 @@ int dpm_runtime_suspend(struct device * dev, pm_message_t state) int error = 0; down(&dpm_sem); - if (dev->power.power_state == state) + if (dev->power.power_state.event == state.event) goto Done; - if (dev->power.power_state) + if (dev->power.power_state.event) runtime_resume(dev); if (!(error = suspend_device(dev, state))) diff --git a/drivers/base/power/suspend.c b/drivers/base/power/suspend.c index 2ccee3763acf..50501764d050 100644 --- a/drivers/base/power/suspend.c +++ b/drivers/base/power/suspend.c @@ -40,22 +40,22 @@ int suspend_device(struct device * dev, pm_message_t state) int error = 0; down(&dev->sem); - if (dev->power.power_state) { + if (dev->power.power_state.event) { dev_dbg(dev, "PM: suspend %d-->%d\n", - dev->power.power_state, state); + dev->power.power_state.event, state.event); } if (dev->power.pm_parent - && dev->power.pm_parent->power.power_state) { + && dev->power.pm_parent->power.power_state.event) { dev_err(dev, "PM: suspend %d->%d, parent %s already %d\n", - dev->power.power_state, state, + dev->power.power_state.event, state.event, dev->power.pm_parent->bus_id, - dev->power.pm_parent->power.power_state); + dev->power.pm_parent->power.power_state.event); } dev->power.prev_state = dev->power.power_state; - if (dev->bus && dev->bus->suspend && !dev->power.power_state) { + if (dev->bus && dev->bus->suspend && !dev->power.power_state.event) { dev_dbg(dev, "suspending\n"); error = dev->bus->suspend(dev, state); } diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c index f82b3df9545f..8d04fb435c17 100644 --- a/drivers/base/power/sysfs.c +++ b/drivers/base/power/sysfs.c @@ -26,19 +26,19 @@ static ssize_t state_show(struct device * dev, struct device_attribute *attr, char * buf) { - return sprintf(buf, "%u\n", dev->power.power_state); + return sprintf(buf, "%u\n", dev->power.power_state.event); } static ssize_t state_store(struct device * dev, struct device_attribute *attr, const char * buf, size_t n) { - u32 state; + pm_message_t state; char * rest; int error = 0; - state = simple_strtoul(buf, &rest, 10); + state.event = simple_strtoul(buf, &rest, 10); if (*rest) return -EINVAL; - if (state) + if (state.event) error = dpm_runtime_suspend(dev, state); else dpm_runtime_resume(dev); diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index dae1bd5b8c3e..73ca8f73917d 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -1229,7 +1229,7 @@ static int generic_ide_suspend(struct device *dev, pm_message_t state) rq.special = &args; rq.pm = &rqpm; rqpm.pm_step = ide_pm_state_start_suspend; - rqpm.pm_state = state; + rqpm.pm_state = state.event; return ide_do_drive_cmd(drive, &rq, ide_wait); } @@ -1248,7 +1248,7 @@ static int generic_ide_resume(struct device *dev) rq.special = &args; rq.pm = &rqpm; rqpm.pm_step = ide_pm_state_start_resume; - rqpm.pm_state = 0; + rqpm.pm_state = PM_EVENT_ON; return ide_do_drive_cmd(drive, &rq, ide_head_wait); } diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c index 10592cec6c43..24e21b2838c1 100644 --- a/drivers/ide/pci/sc1200.c +++ b/drivers/ide/pci/sc1200.c @@ -350,9 +350,9 @@ static int sc1200_suspend (struct pci_dev *dev, pm_message_t state) { ide_hwif_t *hwif = NULL; - printk("SC1200: suspend(%u)\n", state); + printk("SC1200: suspend(%u)\n", state.event); - if (state == 0) { + if (state.event == PM_EVENT_ON) { // we only save state when going from full power to less // @@ -386,8 +386,8 @@ static int sc1200_suspend (struct pci_dev *dev, pm_message_t state) /* You don't need to iterate over disks -- sysfs should have done that for you already */ pci_disable_device(dev); - pci_set_power_state(dev,state); - dev->current_state = state; + pci_set_power_state(dev, pci_choose_state(dev, state)); + dev->current_state = state.event; return 0; } @@ -396,8 +396,8 @@ static int sc1200_resume (struct pci_dev *dev) ide_hwif_t *hwif = NULL; printk("SC1200: resume\n"); - pci_set_power_state(dev,0); // bring chip back from sleep state - dev->current_state = 0; + pci_set_power_state(dev, PCI_D0); // bring chip back from sleep state + dev->current_state = PM_EVENT_ON; pci_enable_device(dev); // // loop over all interfaces that are part of this pci device: diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index d2760b8ca159..87d1f8a1f41e 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -1509,7 +1509,7 @@ pmac_ide_macio_suspend(struct macio_dev *mdev, pm_message_t state) ide_hwif_t *hwif = (ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev); int rc = 0; - if (state != mdev->ofdev.dev.power.power_state && state >= 2) { + if (state.event != mdev->ofdev.dev.power.power_state.event && state.event >= PM_EVENT_SUSPEND) { rc = pmac_ide_do_suspend(hwif); if (rc == 0) mdev->ofdev.dev.power.power_state = state; @@ -1524,7 +1524,7 @@ pmac_ide_macio_resume(struct macio_dev *mdev) ide_hwif_t *hwif = (ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev); int rc = 0; - if (mdev->ofdev.dev.power.power_state != 0) { + if (mdev->ofdev.dev.power.power_state.event != PM_EVENT_ON) { rc = pmac_ide_do_resume(hwif); if (rc == 0) mdev->ofdev.dev.power.power_state = PMSG_ON; @@ -1613,7 +1613,7 @@ pmac_ide_pci_suspend(struct pci_dev *pdev, pm_message_t state) ide_hwif_t *hwif = (ide_hwif_t *)pci_get_drvdata(pdev); int rc = 0; - if (state != pdev->dev.power.power_state && state >= 2) { + if (state.event != pdev->dev.power.power_state.event && state.event >= 2) { rc = pmac_ide_do_suspend(hwif); if (rc == 0) pdev->dev.power.power_state = state; @@ -1628,7 +1628,7 @@ pmac_ide_pci_resume(struct pci_dev *pdev) ide_hwif_t *hwif = (ide_hwif_t *)pci_get_drvdata(pdev); int rc = 0; - if (pdev->dev.power.power_state != 0) { + if (pdev->dev.power.power_state.event != PM_EVENT_ON) { rc = pmac_ide_do_resume(hwif); if (rc == 0) pdev->dev.power.power_state = PMSG_ON; diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c index 7e1afca75e41..c0712a1ea5af 100644 --- a/drivers/macintosh/mediabay.c +++ b/drivers/macintosh/mediabay.c @@ -708,7 +708,7 @@ static int __pmac media_bay_suspend(struct macio_dev *mdev, pm_message_t state) { struct media_bay_info *bay = macio_get_drvdata(mdev); - if (state != mdev->ofdev.dev.power.power_state && state == PM_SUSPEND_MEM) { + if (state.event != mdev->ofdev.dev.power.power_state.event && state.event == PM_EVENT_SUSPEND) { down(&bay->lock); bay->sleeping = 1; set_mb_power(bay, 0); @@ -723,7 +723,7 @@ static int __pmac media_bay_resume(struct macio_dev *mdev) { struct media_bay_info *bay = macio_get_drvdata(mdev); - if (mdev->ofdev.dev.power.power_state != 0) { + if (mdev->ofdev.dev.power.power_state.event != PM_EVENT_ON) { mdev->ofdev.dev.power.power_state = PMSG_ON; /* We re-enable the bay using it's previous content diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c index 4a0a0ad2d03c..645a2e5c70ab 100644 --- a/drivers/macintosh/via-pmu.c +++ b/drivers/macintosh/via-pmu.c @@ -3065,7 +3065,7 @@ static int pmu_sys_suspended = 0; static int pmu_sys_suspend(struct sys_device *sysdev, pm_message_t state) { - if (state != PM_SUSPEND_DISK || pmu_sys_suspended) + if (state.event != PM_EVENT_SUSPEND || pmu_sys_suspended) return 0; /* Suspend PMU event interrupts */ diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c index 7d8b3cad350b..9ea5747b1211 100644 --- a/drivers/media/dvb/cinergyT2/cinergyT2.c +++ b/drivers/media/dvb/cinergyT2/cinergyT2.c @@ -888,7 +888,7 @@ static int cinergyt2_suspend (struct usb_interface *intf, pm_message_t state) if (down_interruptible(&cinergyt2->sem)) return -ERESTARTSYS; - if (state > 0) { /* state 0 seems to mean DEVICE_PM_ON */ + if (state.event > PM_EVENT_ON) { struct cinergyt2 *cinergyt2 = usb_get_intfdata (intf); #ifdef ENABLE_RC cancel_delayed_work(&cinergyt2->rc_query_work); diff --git a/drivers/net/irda/vlsi_ir.c b/drivers/net/irda/vlsi_ir.c index 4be95398bac4..6d9de626c967 100644 --- a/drivers/net/irda/vlsi_ir.c +++ b/drivers/net/irda/vlsi_ir.c @@ -1757,12 +1757,12 @@ static int vlsi_irda_suspend(struct pci_dev *pdev, pm_message_t state) idev = ndev->priv; down(&idev->sem); if (pdev->current_state != 0) { /* already suspended */ - if (state > pdev->current_state) { /* simply go deeper */ - pci_set_power_state(pdev,state); - pdev->current_state = state; + if (state.event > pdev->current_state) { /* simply go deeper */ + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + pdev->current_state = state.event; } else - IRDA_ERROR("%s - %s: invalid suspend request %u -> %u\n", __FUNCTION__, PCIDEV_NAME(pdev), pdev->current_state, state); + IRDA_ERROR("%s - %s: invalid suspend request %u -> %u\n", __FUNCTION__, PCIDEV_NAME(pdev), pdev->current_state, state.event); up(&idev->sem); return 0; } @@ -1777,7 +1777,7 @@ static int vlsi_irda_suspend(struct pci_dev *pdev, pm_message_t state) } pci_set_power_state(pdev, pci_choose_state(pdev, state)); - pdev->current_state = state; + pdev->current_state = state.event; idev->resume_ok = 1; up(&idev->sem); return 0; diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index 6db1fb6461de..abac1e40154b 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -2239,7 +2239,7 @@ static void airo_read_stats(struct airo_info *ai) { u32 *vals = stats_rid.vals; clear_bit(JOB_STATS, &ai->flags); - if (ai->power) { + if (ai->power.event) { up(&ai->sem); return; } @@ -2969,7 +2969,7 @@ static int airo_thread(void *data) { break; } - if (ai->power || test_bit(FLAG_FLASHING, &ai->flags)) { + if (ai->power.event || test_bit(FLAG_FLASHING, &ai->flags)) { up(&ai->sem); continue; } @@ -5521,7 +5521,7 @@ static int airo_pci_resume(struct pci_dev *pdev) pci_restore_state(pdev); pci_enable_wake(pdev, pci_choose_state(pdev, ai->power), 0); - if (ai->power > 1) { + if (ai->power.event > 1) { reset_card(dev, 0); mpi_init_descriptors(ai); setup_card(ai, dev->dev_addr, 0); @@ -7123,7 +7123,7 @@ static int airo_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) int rc = 0; struct airo_info *ai = (struct airo_info *)dev->priv; - if (ai->power) + if (ai->power.event) return 0; switch (cmd) { @@ -7202,7 +7202,7 @@ static void airo_read_wireless_stats(struct airo_info *local) /* Get stats out of the card */ clear_bit(JOB_WSTATS, &local->flags); - if (local->power) { + if (local->power.event) { up(&local->sem); return; } diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 1b34fc56067e..c62d2f043397 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -333,13 +333,17 @@ pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state) if (platform_pci_choose_state) { ret = platform_pci_choose_state(dev, state); if (ret >= 0) - state = ret; + state.event = ret; } - switch (state) { - case 0: return PCI_D0; - case 3: return PCI_D3hot; + + switch (state.event) { + case PM_EVENT_ON: + return PCI_D0; + case PM_EVENT_FREEZE: + case PM_EVENT_SUSPEND: + return PCI_D3hot; default: - printk("They asked me for state %d\n", state); + printk("They asked me for state %d\n", state.event); BUG(); } return PCI_D0; diff --git a/drivers/scsi/mesh.c b/drivers/scsi/mesh.c index ff1933298da6..a4857db4f9b8 100644 --- a/drivers/scsi/mesh.c +++ b/drivers/scsi/mesh.c @@ -1766,7 +1766,7 @@ static int mesh_suspend(struct macio_dev *mdev, pm_message_t state) struct mesh_state *ms = (struct mesh_state *)macio_get_drvdata(mdev); unsigned long flags; - if (state == mdev->ofdev.dev.power.power_state || state < 2) + if (state.event == mdev->ofdev.dev.power.power_state.event || state.event < 2) return 0; scsi_block_requests(ms->host); @@ -1791,7 +1791,7 @@ static int mesh_resume(struct macio_dev *mdev) struct mesh_state *ms = (struct mesh_state *)macio_get_drvdata(mdev); unsigned long flags; - if (mdev->ofdev.dev.power.power_state == 0) + if (mdev->ofdev.dev.power.power_state.event == PM_EVENT_ON) return 0; set_mesh_power(ms, 1); @@ -1802,7 +1802,7 @@ static int mesh_resume(struct macio_dev *mdev) enable_irq(ms->meshintr); scsi_unblock_requests(ms->host); - mdev->ofdev.dev.power.power_state = 0; + mdev->ofdev.dev.power.power_state.event = PM_EVENT_ON; return 0; } diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c index 5bfde99e245e..5ddd8ab1f108 100644 --- a/drivers/serial/pmac_zilog.c +++ b/drivers/serial/pmac_zilog.c @@ -1600,7 +1600,7 @@ static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state) return 0; } - if (pm_state == mdev->ofdev.dev.power.power_state || pm_state < 2) + if (pm_state.event == mdev->ofdev.dev.power.power_state.event) return 0; pmz_debug("suspend, switching to state %d\n", pm_state); @@ -1660,7 +1660,7 @@ static int pmz_resume(struct macio_dev *mdev) if (uap == NULL) return 0; - if (mdev->ofdev.dev.power.power_state == 0) + if (mdev->ofdev.dev.power.power_state.event == PM_EVENT_ON) return 0; pmz_debug("resume, switching to state 0\n"); @@ -1713,7 +1713,7 @@ static int pmz_resume(struct macio_dev *mdev) pmz_debug("resume, switching complete\n"); - mdev->ofdev.dev.power.power_state = 0; + mdev->ofdev.dev.power.power_state.event = PM_EVENT_ON; return 0; } diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index c3e46d24a37e..c9412daff682 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1570,7 +1570,7 @@ static int __usb_suspend_device (struct usb_device *udev, int port1, struct usb_driver *driver; intf = udev->actconfig->interface[i]; - if (state <= intf->dev.power.power_state) + if (state.event <= intf->dev.power.power_state.event) continue; if (!intf->dev.driver) continue; @@ -1578,11 +1578,11 @@ static int __usb_suspend_device (struct usb_device *udev, int port1, if (driver->suspend) { status = driver->suspend(intf, state); - if (intf->dev.power.power_state != state + if (intf->dev.power.power_state.event != state.event || status) dev_err(&intf->dev, "suspend %d fail, code %d\n", - state, status); + state.event, status); } /* only drivers with suspend() can ever resume(); @@ -1595,7 +1595,7 @@ static int __usb_suspend_device (struct usb_device *udev, int port1, * since we know every driver's probe/disconnect works * even for drivers that can't suspend. */ - if (!driver->suspend || state > PM_SUSPEND_MEM) { + if (!driver->suspend || state.event > PM_EVENT_FREEZE) { #if 1 dev_warn(&intf->dev, "resume is unsafe!\n"); #else @@ -1616,7 +1616,7 @@ static int __usb_suspend_device (struct usb_device *udev, int port1, * policies (when HNP doesn't apply) once we have mechanisms to * turn power back on! (Likely not before 2.7...) */ - if (state > PM_SUSPEND_MEM) { + if (state.event > PM_EVENT_FREEZE) { dev_warn(&udev->dev, "no poweroff yet, suspending instead\n"); } @@ -1733,7 +1733,7 @@ static int finish_port_resume(struct usb_device *udev) struct usb_driver *driver; intf = udev->actconfig->interface[i]; - if (intf->dev.power.power_state == PMSG_ON) + if (intf->dev.power.power_state.event == PM_EVENT_ON) continue; if (!intf->dev.driver) { /* FIXME maybe force to alt 0 */ @@ -1747,11 +1747,11 @@ static int finish_port_resume(struct usb_device *udev) /* can we do better than just logging errors? */ status = driver->resume(intf); - if (intf->dev.power.power_state != PMSG_ON + if (intf->dev.power.power_state.event != PM_EVENT_ON || status) dev_dbg(&intf->dev, "resume fail, state %d code %d\n", - intf->dev.power.power_state, status); + intf->dev.power.power_state.event, status); } status = 0; @@ -1934,7 +1934,7 @@ static int hub_resume(struct usb_interface *intf) unsigned port1; int status; - if (intf->dev.power.power_state == PM_SUSPEND_ON) + if (intf->dev.power.power_state.event == PM_EVENT_ON) return 0; for (port1 = 1; port1 <= hdev->maxchild; port1++) { diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 99c85d2f92da..2cddd8a00437 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -1400,7 +1400,7 @@ static int usb_generic_suspend(struct device *dev, pm_message_t message) driver = to_usb_driver(dev->driver); /* there's only one USB suspend state */ - if (intf->dev.power.power_state) + if (intf->dev.power.power_state.event) return 0; if (driver->suspend) diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c index b01efb6b36f6..65ac9fef3a7c 100644 --- a/drivers/usb/host/ehci-dbg.c +++ b/drivers/usb/host/ehci-dbg.c @@ -641,7 +641,7 @@ show_registers (struct class_device *class_dev, char *buf) spin_lock_irqsave (&ehci->lock, flags); - if (bus->controller->power.power_state) { + if (bus->controller->power.power_state.event) { size = scnprintf (next, size, "bus %s, device %s (driver " DRIVER_VERSION ")\n" "%s\n" diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c index c58408c95c3d..447f488f5d93 100644 --- a/drivers/usb/host/ohci-dbg.c +++ b/drivers/usb/host/ohci-dbg.c @@ -631,7 +631,7 @@ show_registers (struct class_device *class_dev, char *buf) hcd->product_desc, hcd_name); - if (bus->controller->power.power_state) { + if (bus->controller->power.power_state.event) { size -= scnprintf (next, size, "SUSPENDED (no register access)\n"); goto done; diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index 7a890a65f55d..80eaf659c198 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -1781,9 +1781,9 @@ sl811h_suspend(struct device *dev, pm_message_t state, u32 phase) if (phase != SUSPEND_POWER_DOWN) return retval; - if (state <= PM_SUSPEND_MEM) + if (state.event == PM_EVENT_FREEZE) retval = sl811h_hub_suspend(hcd); - else + else if (state.event == PM_EVENT_SUSPEND) port_power(sl811, 0); if (retval == 0) dev->power.power_state = state; @@ -1802,7 +1802,7 @@ sl811h_resume(struct device *dev, u32 phase) /* with no "check to see if VBUS is still powered" board hook, * let's assume it'd only be powered to enable remote wakeup. */ - if (dev->power.power_state > PM_SUSPEND_MEM + if (dev->power.power_state.event == PM_EVENT_SUSPEND || !hcd->can_wakeup) { sl811->port1 = 0; port_power(sl811, 1); diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index cda7249a90b2..fd7fb98e4b20 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -1533,7 +1533,7 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf) if (down_interruptible (&dev->sem)) return -ERESTARTSYS; - if (intf->dev.power.power_state != PMSG_ON) { + if (intf->dev.power.power_state.event != PM_EVENT_ON) { up (&dev->sem); return -EHOSTUNREACH; } diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c index 7bc1d44d8814..b0eba3ac6420 100644 --- a/drivers/video/aty/aty128fb.c +++ b/drivers/video/aty/aty128fb.c @@ -2323,17 +2323,16 @@ static int aty128_pci_suspend(struct pci_dev *pdev, pm_message_t state) * can properly take care of D3 ? Also, with swsusp, we * know we'll be rebooted, ... */ -#ifdef CONFIG_PPC_PMAC +#ifndef CONFIG_PPC_PMAC /* HACK ALERT ! Once I find a proper way to say to each driver * individually what will happen with it's PCI slot, I'll change * that. On laptops, the AGP slot is just unclocked, so D2 is * expected, while on desktops, the card is powered off */ - if (state >= 3) - state = 2; + return 0; #endif /* CONFIG_PPC_PMAC */ - if (state != 2 || state == pdev->dev.power.power_state) + if (state.event == pdev->dev.power.power_state.event) return 0; printk(KERN_DEBUG "aty128fb: suspending...\n"); @@ -2367,7 +2366,7 @@ static int aty128_pci_suspend(struct pci_dev *pdev, pm_message_t state) * used dummy fb ops, 2.5 need proper support for this at the * fbdev level */ - if (state == 2) + if (state.event != PM_EVENT_ON) aty128_set_suspend(par, 1); release_console_sem(); @@ -2382,12 +2381,11 @@ static int aty128_do_resume(struct pci_dev *pdev) struct fb_info *info = pci_get_drvdata(pdev); struct aty128fb_par *par = info->par; - if (pdev->dev.power.power_state == 0) + if (pdev->dev.power.power_state.event == PM_EVENT_ON) return 0; /* Wakeup chip */ - if (pdev->dev.power.power_state == 2) - aty128_set_suspend(par, 0); + aty128_set_suspend(par, 0); par->asleep = 0; /* Restore display & engine */ diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c index 8c42538dc8c1..3e10bd837d9e 100644 --- a/drivers/video/aty/atyfb_base.c +++ b/drivers/video/aty/atyfb_base.c @@ -2022,17 +2022,16 @@ static int atyfb_pci_suspend(struct pci_dev *pdev, pm_message_t state) struct fb_info *info = pci_get_drvdata(pdev); struct atyfb_par *par = (struct atyfb_par *) info->par; -#ifdef CONFIG_PPC_PMAC +#ifndef CONFIG_PPC_PMAC /* HACK ALERT ! Once I find a proper way to say to each driver * individually what will happen with it's PCI slot, I'll change * that. On laptops, the AGP slot is just unclocked, so D2 is * expected, while on desktops, the card is powered off */ - if (state >= 3) - state = 2; + return 0; #endif /* CONFIG_PPC_PMAC */ - if (state != 2 || state == pdev->dev.power.power_state) + if (state.event == pdev->dev.power.power_state.event) return 0; acquire_console_sem(); @@ -2071,12 +2070,12 @@ static int atyfb_pci_resume(struct pci_dev *pdev) struct fb_info *info = pci_get_drvdata(pdev); struct atyfb_par *par = (struct atyfb_par *) info->par; - if (pdev->dev.power.power_state == 0) + if (pdev->dev.power.power_state.event == PM_EVENT_ON) return 0; acquire_console_sem(); - if (pdev->dev.power.power_state == 2) + if (pdev->dev.power.power_state.event == 2) aty_power_mgmt(0, par); par->asleep = 0; diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c index 98352af39325..59a1b6f85067 100644 --- a/drivers/video/aty/radeon_pm.c +++ b/drivers/video/aty/radeon_pm.c @@ -2526,18 +2526,18 @@ int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t state) struct radeonfb_info *rinfo = info->par; int i; - if (state == pdev->dev.power.power_state) + if (state.event == pdev->dev.power.power_state.event) return 0; printk(KERN_DEBUG "radeonfb (%s): suspending to state: %d...\n", - pci_name(pdev), state); + pci_name(pdev), state.event); /* For suspend-to-disk, we cheat here. We don't suspend anything and * let fbcon continue drawing until we are all set. That shouldn't * really cause any problem at this point, provided that the wakeup * code knows that any state in memory may not match the HW */ - if (state != PM_SUSPEND_MEM) + if (state.event == PM_EVENT_FREEZE) goto done; acquire_console_sem(); @@ -2616,7 +2616,7 @@ int radeonfb_pci_resume(struct pci_dev *pdev) struct radeonfb_info *rinfo = info->par; int rc = 0; - if (pdev->dev.power.power_state == 0) + if (pdev->dev.power.power_state.event == PM_EVENT_ON) return 0; if (rinfo->no_schedule) { @@ -2626,7 +2626,7 @@ int radeonfb_pci_resume(struct pci_dev *pdev) acquire_console_sem(); printk(KERN_DEBUG "radeonfb (%s): resuming from state: %d...\n", - pci_name(pdev), pdev->dev.power.power_state); + pci_name(pdev), pdev->dev.power.power_state.event); if (pci_enable_device(pdev)) { @@ -2637,7 +2637,7 @@ int radeonfb_pci_resume(struct pci_dev *pdev) } pci_set_master(pdev); - if (pdev->dev.power.power_state == PM_SUSPEND_MEM) { + if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) { /* Wakeup chip. Check from config space if we were powered off * (todo: additionally, check CLK_PIN_CNTL too) */ diff --git a/drivers/video/chipsfb.c b/drivers/video/chipsfb.c index e75a965ec760..4131243cfdf8 100644 --- a/drivers/video/chipsfb.c +++ b/drivers/video/chipsfb.c @@ -462,9 +462,9 @@ static int chipsfb_pci_suspend(struct pci_dev *pdev, pm_message_t state) { struct fb_info *p = pci_get_drvdata(pdev); - if (state == pdev->dev.power.power_state) + if (state.event == pdev->dev.power.power_state.event) return 0; - if (state != PM_SUSPEND_MEM) + if (state.event != PM_SUSPEND_MEM) goto done; acquire_console_sem(); diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c index 7513fb9b19cf..6db183462b92 100644 --- a/drivers/video/i810/i810_main.c +++ b/drivers/video/i810/i810_main.c @@ -1506,12 +1506,12 @@ static int i810fb_suspend(struct pci_dev *dev, pm_message_t state) struct i810fb_par *par = (struct i810fb_par *) info->par; int blank = 0, prev_state = par->cur_state; - if (state == prev_state) + if (state.event == prev_state) return 0; - par->cur_state = state; + par->cur_state = state.event; - switch (state) { + switch (state.event) { case 1: blank = VESA_VSYNC_SUSPEND; break; diff --git a/include/linux/pm.h b/include/linux/pm.h index 7aeb208ed713..5cfb07648eca 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -186,7 +186,9 @@ extern int pm_suspend(suspend_state_t state); struct device; -typedef u32 __bitwise pm_message_t; +typedef struct pm_message { + int event; +} pm_message_t; /* * There are 4 important states driver can be in: @@ -207,9 +209,13 @@ typedef u32 __bitwise pm_message_t; * or something similar soon. */ -#define PMSG_FREEZE ((__force pm_message_t) 3) -#define PMSG_SUSPEND ((__force pm_message_t) 3) -#define PMSG_ON ((__force pm_message_t) 0) +#define PM_EVENT_ON 0 +#define PM_EVENT_FREEZE 1 +#define PM_EVENT_SUSPEND 2 + +#define PMSG_FREEZE ((struct pm_message){ .event = PM_EVENT_FREEZE, }) +#define PMSG_SUSPEND ((struct pm_message){ .event = PM_EVENT_SUSPEND, }) +#define PMSG_ON ((struct pm_message){ .event = PM_EVENT_ON, }) struct dev_pm_info { pm_message_t power_state;