From: Carolyn Wyborny Date: Fri, 15 Oct 2010 17:35:31 +0000 (+0000) Subject: e1000e: Fix for offline diag test failure at first call X-Git-Tag: MMI-PSA29.97-13-9~21994^2~93 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=c6ce3854f098e1307ecd3bde07903d65fb14a9cb;p=GitHub%2FMotorolaMobilityLLC%2Fkernel-slsi.git e1000e: Fix for offline diag test failure at first call Move link test call to later in the offline sequence, move the restore settings block to afterwards and add another reset to ensure the hardware is in a known state afterwards. Signed-off-by: Carolyn Wyborny Acked-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index b7f15b3f0e03..8984d165a39b 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -1717,13 +1717,6 @@ static void e1000_diag_test(struct net_device *netdev, e_info("offline testing starting\n"); - /* - * Link test performed before hardware reset so autoneg doesn't - * interfere with test result - */ - if (e1000_link_test(adapter, &data[4])) - eth_test->flags |= ETH_TEST_FL_FAILED; - if (if_running) /* indicate we're in test mode */ dev_close(netdev); @@ -1747,15 +1740,19 @@ static void e1000_diag_test(struct net_device *netdev, if (e1000_loopback_test(adapter, &data[3])) eth_test->flags |= ETH_TEST_FL_FAILED; + /* force this routine to wait until autoneg complete/timeout */ + adapter->hw.phy.autoneg_wait_to_complete = 1; + e1000e_reset(adapter); + adapter->hw.phy.autoneg_wait_to_complete = 0; + + if (e1000_link_test(adapter, &data[4])) + eth_test->flags |= ETH_TEST_FL_FAILED; + /* restore speed, duplex, autoneg settings */ adapter->hw.phy.autoneg_advertised = autoneg_advertised; adapter->hw.mac.forced_speed_duplex = forced_speed_duplex; adapter->hw.mac.autoneg = autoneg; - - /* force this routine to wait until autoneg complete/timeout */ - adapter->hw.phy.autoneg_wait_to_complete = 1; e1000e_reset(adapter); - adapter->hw.phy.autoneg_wait_to_complete = 0; clear_bit(__E1000_TESTING, &adapter->state); if (if_running)