From: Mark Einon Date: Tue, 22 Jan 2013 14:29:48 +0000 (+0000) Subject: staging: et131x: Trivial camel case fixes X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=c655dee9298c68739de2fa6c80f258b434156d42;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git staging: et131x: Trivial camel case fixes Checkpatch now highlights some camel case flag names. Fix these issues. Also fix some remaining lines > 80chars issues for completeness. Signed-off-by: Mark Einon Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c index d2fbe910371d..7adf0af9d0d4 100644 --- a/drivers/staging/et131x/et131x.c +++ b/drivers/staging/et131x/et131x.c @@ -139,19 +139,19 @@ MODULE_DESCRIPTION("10/100/1000 Base-T Ethernet Driver for the ET1310 by Agere S #define NIC_SEND_HANG_THRESHOLD 0 /* MP_TCB flags */ -#define fMP_DEST_MULTI 0x00000001 -#define fMP_DEST_BROAD 0x00000002 +#define FMP_DEST_MULTI 0x00000001 +#define FMP_DEST_BROAD 0x00000002 /* MP_ADAPTER flags */ -#define fMP_ADAPTER_INTERRUPT_IN_USE 0x00000008 +#define FMP_ADAPTER_INTERRUPT_IN_USE 0x00000008 /* MP_SHARED flags */ -#define fMP_ADAPTER_LOWER_POWER 0x00200000 +#define FMP_ADAPTER_LOWER_POWER 0x00200000 -#define fMP_ADAPTER_NON_RECOVER_ERROR 0x00800000 -#define fMP_ADAPTER_HARDWARE_ERROR 0x04000000 +#define FMP_ADAPTER_NON_RECOVER_ERROR 0x00800000 +#define FMP_ADAPTER_HARDWARE_ERROR 0x04000000 -#define fMP_ADAPTER_FAIL_SEND_MASK 0x3ff00000 +#define FMP_ADAPTER_FAIL_SEND_MASK 0x3ff00000 /* Some offsets in PCI config space that are actually used. */ #define ET1310_PCI_MAC_ADDRESS 0xA4 @@ -1062,7 +1062,7 @@ static void et1310_config_mac_regs2(struct et131x_adapter *adapter) writel(ctl, &adapter->regs->txmac.ctl); /* Ready to start the RXDMA/TXDMA engine */ - if (adapter->flags & fMP_ADAPTER_LOWER_POWER) { + if (adapter->flags & FMP_ADAPTER_LOWER_POWER) { et131x_rx_dma_enable(adapter); et131x_tx_dma_enable(adapter); } @@ -2068,7 +2068,7 @@ static void et131x_enable_txrx(struct net_device *netdev) et131x_tx_dma_enable(adapter); /* Enable device interrupts */ - if (adapter->flags & fMP_ADAPTER_INTERRUPT_IN_USE) + if (adapter->flags & FMP_ADAPTER_INTERRUPT_IN_USE) et131x_enable_interrupts(adapter); /* We're ready to move some data, so start the queue */ @@ -2167,7 +2167,7 @@ static void et1310_enable_phy_coma(struct et131x_adapter *adapter) /* Stop sending packets. */ spin_lock_irqsave(&adapter->send_hw_lock, flags); - adapter->flags |= fMP_ADAPTER_LOWER_POWER; + adapter->flags |= FMP_ADAPTER_LOWER_POWER; spin_unlock_irqrestore(&adapter->send_hw_lock, flags); /* Wait for outstanding Receive packets */ @@ -2220,7 +2220,7 @@ static void et1310_disable_phy_coma(struct et131x_adapter *adapter) et131x_adapter_setup(adapter); /* Allow Tx to restart */ - adapter->flags &= ~fMP_ADAPTER_LOWER_POWER; + adapter->flags &= ~FMP_ADAPTER_LOWER_POWER; et131x_enable_txrx(adapter->netdev); } @@ -3041,13 +3041,15 @@ static int nic_send_packet(struct et131x_adapter *adapter, struct tcb *tcb) if (phydev && phydev->speed == SPEED_1000) { if (++adapter->tx_ring.since_irq == PARM_TX_NUM_BUFS_DEF) { /* Last element & Interrupt flag */ - desc[frag - 1].flags = TXDESC_FLAG_INTPROC | TXDESC_FLAG_LASTPKT; + desc[frag - 1].flags = + TXDESC_FLAG_INTPROC | TXDESC_FLAG_LASTPKT; adapter->tx_ring.since_irq = 0; } else { /* Last element */ desc[frag - 1].flags = TXDESC_FLAG_LASTPKT; } } else - desc[frag - 1].flags = TXDESC_FLAG_INTPROC | TXDESC_FLAG_LASTPKT; + desc[frag - 1].flags = + TXDESC_FLAG_INTPROC | TXDESC_FLAG_LASTPKT; desc[0].flags |= TXDESC_FLAG_FIRSTPKT; @@ -3168,9 +3170,9 @@ static int send_packet(struct sk_buff *skb, struct et131x_adapter *adapter) if ((shbufva[0] == 0xffff) && (shbufva[1] == 0xffff) && (shbufva[2] == 0xffff)) { - tcb->flags |= fMP_DEST_BROAD; + tcb->flags |= FMP_DEST_BROAD; } else if ((shbufva[0] & 0x3) == 0x0001) { - tcb->flags |= fMP_DEST_MULTI; + tcb->flags |= FMP_DEST_MULTI; } } @@ -3225,7 +3227,7 @@ static int et131x_send_packets(struct sk_buff *skb, struct net_device *netdev) /* We need to see if the link is up; if it's not, make the * netif layer think we're good and drop the packet */ - if ((adapter->flags & fMP_ADAPTER_FAIL_SEND_MASK) || + if ((adapter->flags & FMP_ADAPTER_FAIL_SEND_MASK) || !netif_carrier_ok(netdev)) { dev_kfree_skb_any(skb); skb = NULL; @@ -3262,9 +3264,9 @@ static inline void free_send_packet(struct et131x_adapter *adapter, struct net_device_stats *stats = &adapter->net_stats; u64 dma_addr; - if (tcb->flags & fMP_DEST_BROAD) + if (tcb->flags & FMP_DEST_BROAD) atomic_inc(&adapter->stats.broadcast_pkts_xmtd); - else if (tcb->flags & fMP_DEST_MULTI) + else if (tcb->flags & FMP_DEST_MULTI) atomic_inc(&adapter->stats.multicast_pkts_xmtd); else atomic_inc(&adapter->stats.unicast_pkts_xmtd); @@ -4351,7 +4353,7 @@ static void et131x_isr_handler(struct work_struct *work) * to do is disable the interrupts and set the flag to cause us * to reset so we can solve this issue. */ - /* MP_SET_FLAG( adapter, fMP_ADAPTER_HARDWARE_ERROR); */ + /* MP_SET_FLAG( adapter, FMP_ADAPTER_HARDWARE_ERROR); */ dev_warn(&adapter->pdev->dev, "RXMAC interrupt, error 0x%08x. Requesting reset\n", @@ -4466,7 +4468,7 @@ static int et131x_open(struct net_device *netdev) return result; } - adapter->flags |= fMP_ADAPTER_INTERRUPT_IN_USE; + adapter->flags |= FMP_ADAPTER_INTERRUPT_IN_USE; et131x_up(netdev); @@ -4485,7 +4487,7 @@ static int et131x_close(struct net_device *netdev) et131x_down(netdev); - adapter->flags &= ~fMP_ADAPTER_INTERRUPT_IN_USE; + adapter->flags &= ~FMP_ADAPTER_INTERRUPT_IN_USE; free_irq(adapter->pdev->irq, netdev); /* Stop the error timer */ @@ -4695,17 +4697,17 @@ static void et131x_tx_timeout(struct net_device *netdev) unsigned long flags; /* If the device is closed, ignore the timeout */ - if (~(adapter->flags & fMP_ADAPTER_INTERRUPT_IN_USE)) + if (~(adapter->flags & FMP_ADAPTER_INTERRUPT_IN_USE)) return; /* Any nonrecoverable hardware error? * Checks adapter->flags for any failure in phy reading */ - if (adapter->flags & fMP_ADAPTER_NON_RECOVER_ERROR) + if (adapter->flags & FMP_ADAPTER_NON_RECOVER_ERROR) return; /* Hardware failure? */ - if (adapter->flags & fMP_ADAPTER_HARDWARE_ERROR) { + if (adapter->flags & FMP_ADAPTER_HARDWARE_ERROR) { dev_err(&adapter->pdev->dev, "hardware error - reset\n"); return; }