From: Benjamin Herrenschmidt Date: Tue, 3 Jun 2014 07:33:41 +0000 (+1000) Subject: powerpc/serial: Use saner flags when creating legacy ports X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=c4cad90f9e9dcb85afc5e75a02ae3522ed077296;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git powerpc/serial: Use saner flags when creating legacy ports We had a mix & match of flags used when creating legacy ports depending on where we found them in the device-tree. Among others we were missing UPF_SKIP_TEST for some kind of ISA ports which is a problem as quite a few UARTs out there don't support the loopback test (such as a lot of BMCs). Let's pick the set of flags used by the SoC code and generalize it which means autoconf, no loopback test, irq maybe shared and fixed port. Sending to stable as the lack of UPF_SKIP_TEST is breaking serial on some machines so I want this back into distros Signed-off-by: Benjamin Herrenschmidt CC: stable@vger.kernel.org --- diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index 85fb16e64cef..936258881c98 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -48,6 +48,9 @@ static struct of_device_id legacy_serial_parents[] __initdata = { static unsigned int legacy_serial_count; static int legacy_serial_console = -1; +static const upf_t legacy_port_flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_SHARE_IRQ | UPF_FIXED_PORT; + static unsigned int tsi_serial_in(struct uart_port *p, int offset) { unsigned int tmp; @@ -160,8 +163,6 @@ static int __init add_legacy_soc_port(struct device_node *np, { u64 addr; const __be32 *addrp; - upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ - | UPF_FIXED_PORT; struct device_node *tsi = of_get_parent(np); /* We only support ports that have a clock frequency properly @@ -191,9 +192,11 @@ static int __init add_legacy_soc_port(struct device_node *np, * IO port value. It will be fixed up later along with the irq */ if (tsi && !strcmp(tsi->type, "tsi-bridge")) - return add_legacy_port(np, -1, UPIO_TSI, addr, addr, NO_IRQ, flags, 0); + return add_legacy_port(np, -1, UPIO_TSI, addr, addr, + NO_IRQ, legacy_port_flags, 0); else - return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags, 0); + return add_legacy_port(np, -1, UPIO_MEM, addr, addr, + NO_IRQ, legacy_port_flags, 0); } static int __init add_legacy_isa_port(struct device_node *np, @@ -239,7 +242,7 @@ static int __init add_legacy_isa_port(struct device_node *np, /* Add port, irq will be dealt with later */ return add_legacy_port(np, index, UPIO_PORT, be32_to_cpu(reg[1]), - taddr, NO_IRQ, UPF_BOOT_AUTOCONF, 0); + taddr, NO_IRQ, legacy_port_flags, 0); } @@ -312,7 +315,7 @@ static int __init add_legacy_pci_port(struct device_node *np, * IO port value. It will be fixed up later along with the irq */ return add_legacy_port(np, index, iotype, base, addr, NO_IRQ, - UPF_BOOT_AUTOCONF, np != pci_dev); + legacy_port_flags, np != pci_dev); } #endif