From: Huacai Chen Date: Fri, 21 Mar 2014 10:44:09 +0000 (+0800) Subject: MIPS: Loongson 3: Add CPU hotplug support X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=c4a987db1b3cd89207cece4b8121c09cbfbc978a;p=GitHub%2Fexynos8895%2Fandroid_kernel_samsung_universal8895.git MIPS: Loongson 3: Add CPU hotplug support Tips of Loongson's CPU hotplug: 1, To fully shutdown a core in Loongson 3, the target core should go to CKSEG1 and flush all L1 cache entries at first. Then, another core (usually Core 0) can safely disable the clock of the target core. So play_dead() call loongson3_play_dead() via CKSEG1 (both uncached and unmmaped). 2, The default clocksource of Loongson is MIPS. Since clock source is a global device, timekeeping need the CP0' Count registers of each core be synchronous. Thus, when a core is up, we use a SMP_ASK_C0COUNT IPI to ask Core-0's Count. Signed-off-by: Huacai Chen Signed-off-by: Hongliang Tao Signed-off-by: Hua Yan Tested-by: Alex Smith Reviewed-by: Alex Smith Cc: John Crispin Cc: Steven J. Hill Cc: Aurelien Jarno Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang Cc: Zhangjin Wu Patchwork: https://patchwork.linux-mips.org/patch/6639 Signed-off-by: Ralf Baechle --- diff --git a/arch/mips/include/asm/mach-loongson/irq.h b/arch/mips/include/asm/mach-loongson/irq.h index 0c77b22a6630..34560bda6626 100644 --- a/arch/mips/include/asm/mach-loongson/irq.h +++ b/arch/mips/include/asm/mach-loongson/irq.h @@ -37,6 +37,7 @@ #endif +extern void fixup_irqs(void); extern void loongson3_ipi_interrupt(struct pt_regs *regs); #include_next diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h index f185907e8ce3..f3fd1eb8e3dd 100644 --- a/arch/mips/include/asm/mach-loongson/loongson.h +++ b/arch/mips/include/asm/mach-loongson/loongson.h @@ -249,6 +249,9 @@ static inline void do_perfcnt_IRQ(void) #define LOONGSON_PXARB_CFG LOONGSON_REG(LOONGSON_REGBASE + 0x68) #define LOONGSON_PXARB_STATUS LOONGSON_REG(LOONGSON_REGBASE + 0x6c) +/* Chip Config */ +#define LOONGSON_CHIPCFG0 LOONGSON_REG(LOONGSON_REGBASE + 0x80) + /* pcimap */ #define LOONGSON_PCIMAP_PCIMAP_LO0 0x0000003f @@ -264,9 +267,6 @@ static inline void do_perfcnt_IRQ(void) #ifdef CONFIG_CPU_SUPPORTS_CPUFREQ #include extern struct cpufreq_frequency_table loongson2_clockmod_table[]; - -/* Chip Config */ -#define LOONGSON_CHIPCFG0 LOONGSON_REG(LOONGSON_REGBASE + 0x80) #endif /* diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h index eb6008758484..efa02acd3dd5 100644 --- a/arch/mips/include/asm/smp.h +++ b/arch/mips/include/asm/smp.h @@ -42,6 +42,7 @@ extern int __cpu_logical_map[NR_CPUS]; #define SMP_ICACHE_FLUSH 0x4 /* Used by kexec crashdump to save all cpu's state */ #define SMP_DUMP 0x8 +#define SMP_ASK_C0COUNT 0x10 extern volatile cpumask_t cpu_callin_map; diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig index a5d46f5efe03..7397be226a06 100644 --- a/arch/mips/loongson/Kconfig +++ b/arch/mips/loongson/Kconfig @@ -79,6 +79,7 @@ config LEMOTE_MACH3A select SYS_HAS_CPU_LOONGSON3 select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_SMP + select SYS_SUPPORTS_HOTPLUG_CPU select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_HIGHMEM select SYS_SUPPORTS_LITTLE_ENDIAN diff --git a/arch/mips/loongson/loongson-3/irq.c b/arch/mips/loongson/loongson-3/irq.c index 088fd5e4fd64..f240828181ff 100644 --- a/arch/mips/loongson/loongson-3/irq.c +++ b/arch/mips/loongson/loongson-3/irq.c @@ -114,3 +114,13 @@ void __init mach_init_irq(void) set_c0_status(STATUSF_IP2 | STATUSF_IP6); } + +#ifdef CONFIG_HOTPLUG_CPU + +void fixup_irqs(void) +{ + irq_cpu_offline(); + clear_c0_status(ST0_IM); +} + +#endif diff --git a/arch/mips/loongson/loongson-3/smp.c b/arch/mips/loongson/loongson-3/smp.c index 93483c25b4b9..c665fe16d4c9 100644 --- a/arch/mips/loongson/loongson-3/smp.c +++ b/arch/mips/loongson/loongson-3/smp.c @@ -23,10 +23,14 @@ #include #include #include +#include #include #include "smp.h" +DEFINE_PER_CPU(int, cpu_state); +DEFINE_PER_CPU(uint32_t, core0_c0count); + /* read a 32bit value from ipi register */ #define loongson3_ipi_read32(addr) readl(addr) /* read a 64bit value from ipi register */ @@ -158,8 +162,8 @@ loongson3_send_ipi_mask(const struct cpumask *mask, unsigned int action) void loongson3_ipi_interrupt(struct pt_regs *regs) { - int cpu = smp_processor_id(); - unsigned int action; + int i, cpu = smp_processor_id(); + unsigned int action, c0count; /* Load the ipi register to figure out what we're supposed to do */ action = loongson3_ipi_read32(ipi_status0_regs[cpu]); @@ -172,14 +176,24 @@ void loongson3_ipi_interrupt(struct pt_regs *regs) if (action & SMP_CALL_FUNCTION) smp_call_function_interrupt(); + + if (action & SMP_ASK_C0COUNT) { + BUG_ON(cpu != 0); + c0count = read_c0_count(); + for (i = 1; i < loongson_sysconf.nr_cpus; i++) + per_cpu(core0_c0count, i) = c0count; + } } +#define MAX_LOOPS 1111 /* * SMP init and finish on secondary CPUs */ static void loongson3_init_secondary(void) { int i; + uint32_t initcount; + unsigned int cpu = smp_processor_id(); unsigned int imask = STATUSF_IP7 | STATUSF_IP6 | STATUSF_IP3 | STATUSF_IP2; @@ -188,6 +202,21 @@ static void loongson3_init_secondary(void) for (i = 0; i < loongson_sysconf.nr_cpus; i++) loongson3_ipi_write32(0xffffffff, ipi_en0_regs[i]); + + per_cpu(cpu_state, cpu) = CPU_ONLINE; + + i = 0; + __get_cpu_var(core0_c0count) = 0; + loongson3_send_ipi_single(0, SMP_ASK_C0COUNT); + while (!__get_cpu_var(core0_c0count)) { + i++; + cpu_relax(); + } + + if (i > MAX_LOOPS) + i = MAX_LOOPS; + initcount = __get_cpu_var(core0_c0count) + i; + write_c0_count(initcount); } static void loongson3_smp_finish(void) @@ -222,6 +251,8 @@ static void __init loongson3_smp_setup(void) static void __init loongson3_prepare_cpus(unsigned int max_cpus) { + init_cpu_present(cpu_possible_mask); + per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE; } /* @@ -255,6 +286,147 @@ static void __init loongson3_cpus_done(void) { } +#ifdef CONFIG_HOTPLUG_CPU + +static int loongson3_cpu_disable(void) +{ + unsigned long flags; + unsigned int cpu = smp_processor_id(); + + if (cpu == 0) + return -EBUSY; + + set_cpu_online(cpu, false); + cpu_clear(cpu, cpu_callin_map); + local_irq_save(flags); + fixup_irqs(); + local_irq_restore(flags); + flush_cache_all(); + local_flush_tlb_all(); + + return 0; +} + + +static void loongson3_cpu_die(unsigned int cpu) +{ + while (per_cpu(cpu_state, cpu) != CPU_DEAD) + cpu_relax(); + + mb(); +} + +/* To shutdown a core in Loongson 3, the target core should go to CKSEG1 and + * flush all L1 entries at first. Then, another core (usually Core 0) can + * safely disable the clock of the target core. loongson3_play_dead() is + * called via CKSEG1 (uncached and unmmaped) */ +static void loongson3_play_dead(int *state_addr) +{ + register int val; + register long cpuid, core, node, count; + register void *addr, *base, *initfunc; + + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " li %[addr], 0x80000000 \n" /* KSEG0 */ + "1: cache 0, 0(%[addr]) \n" /* flush L1 ICache */ + " cache 0, 1(%[addr]) \n" + " cache 0, 2(%[addr]) \n" + " cache 0, 3(%[addr]) \n" + " cache 1, 0(%[addr]) \n" /* flush L1 DCache */ + " cache 1, 1(%[addr]) \n" + " cache 1, 2(%[addr]) \n" + " cache 1, 3(%[addr]) \n" + " addiu %[sets], %[sets], -1 \n" + " bnez %[sets], 1b \n" + " addiu %[addr], %[addr], 0x20 \n" + " li %[val], 0x7 \n" /* *state_addr = CPU_DEAD; */ + " sw %[val], (%[state_addr]) \n" + " sync \n" + " cache 21, (%[state_addr]) \n" /* flush entry of *state_addr */ + " .set pop \n" + : [addr] "=&r" (addr), [val] "=&r" (val) + : [state_addr] "r" (state_addr), + [sets] "r" (cpu_data[smp_processor_id()].dcache.sets)); + + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " .set mips64 \n" + " mfc0 %[cpuid], $15, 1 \n" + " andi %[cpuid], 0x3ff \n" + " dli %[base], 0x900000003ff01000 \n" + " andi %[core], %[cpuid], 0x3 \n" + " sll %[core], 8 \n" /* get core id */ + " or %[base], %[base], %[core] \n" + " andi %[node], %[cpuid], 0xc \n" + " dsll %[node], 42 \n" /* get node id */ + " or %[base], %[base], %[node] \n" + "1: li %[count], 0x100 \n" /* wait for init loop */ + "2: bnez %[count], 2b \n" /* limit mailbox access */ + " addiu %[count], -1 \n" + " ld %[initfunc], 0x20(%[base]) \n" /* get PC via mailbox */ + " beqz %[initfunc], 1b \n" + " nop \n" + " ld $sp, 0x28(%[base]) \n" /* get SP via mailbox */ + " ld $gp, 0x30(%[base]) \n" /* get GP via mailbox */ + " ld $a1, 0x38(%[base]) \n" + " jr %[initfunc] \n" /* jump to initial PC */ + " nop \n" + " .set pop \n" + : [core] "=&r" (core), [node] "=&r" (node), + [base] "=&r" (base), [cpuid] "=&r" (cpuid), + [count] "=&r" (count), [initfunc] "=&r" (initfunc) + : /* No Input */ + : "a1"); +} + +void play_dead(void) +{ + int *state_addr; + unsigned int cpu = smp_processor_id(); + void (*play_dead_at_ckseg1)(int *); + + idle_task_exit(); + play_dead_at_ckseg1 = + (void *)CKSEG1ADDR((unsigned long)loongson3_play_dead); + state_addr = &per_cpu(cpu_state, cpu); + mb(); + play_dead_at_ckseg1(state_addr); +} + +#define CPU_POST_DEAD_FROZEN (CPU_POST_DEAD | CPU_TASKS_FROZEN) +static int loongson3_cpu_callback(struct notifier_block *nfb, + unsigned long action, void *hcpu) +{ + unsigned int cpu = (unsigned long)hcpu; + + switch (action) { + case CPU_POST_DEAD: + case CPU_POST_DEAD_FROZEN: + pr_info("Disable clock for CPU#%d\n", cpu); + LOONGSON_CHIPCFG0 &= ~(1 << (12 + cpu)); + break; + case CPU_UP_PREPARE: + case CPU_UP_PREPARE_FROZEN: + pr_info("Enable clock for CPU#%d\n", cpu); + LOONGSON_CHIPCFG0 |= 1 << (12 + cpu); + break; + } + + return NOTIFY_OK; +} + +static int register_loongson3_notifier(void) +{ + hotcpu_notifier(loongson3_cpu_callback, 0); + return 0; +} +early_initcall(register_loongson3_notifier); + +#endif + struct plat_smp_ops loongson3_smp_ops = { .send_ipi_single = loongson3_send_ipi_single, .send_ipi_mask = loongson3_send_ipi_mask, @@ -264,4 +436,8 @@ struct plat_smp_ops loongson3_smp_ops = { .boot_secondary = loongson3_boot_secondary, .smp_setup = loongson3_smp_setup, .prepare_cpus = loongson3_prepare_cpus, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_disable = loongson3_cpu_disable, + .cpu_die = loongson3_cpu_die, +#endif };