From: Linus Torvalds Date: Sat, 13 Mar 2010 00:04:50 +0000 (-0800) Subject: Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=c32da02342b7521df25fefc2ef20aee0e61cf887;p=GitHub%2Fmt8127%2Fandroid_kernel_alcatel_ttab.git Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (56 commits) doc: fix typo in comment explaining rb_tree usage Remove fs/ntfs/ChangeLog doc: fix console doc typo doc: cpuset: Update the cpuset flag file Fix of spelling in arch/sparc/kernel/leon_kernel.c no longer needed Remove drivers/parport/ChangeLog Remove drivers/char/ChangeLog doc: typo - Table 1-2 should refer to "status", not "statm" tree-wide: fix typos "ass?o[sc]iac?te" -> "associate" in comments No need to patch AMD-provided drivers/gpu/drm/radeon/atombios.h devres/irq: Fix devm_irq_match comment Remove reference to kthread_create_on_cpu tree-wide: Assorted spelling fixes tree-wide: fix 'lenght' typo in comments and code drm/kms: fix spelling in error message doc: capitalization and other minor fixes in pnp doc devres: typo fix s/dev/devm/ Remove redundant trailing semicolons from macros fix typo "definetly" -> "definitely" in comment tree-wide: s/widht/width/g typo in comments ... Fix trivial conflict in Documentation/laptops/00-INDEX --- c32da02342b7521df25fefc2ef20aee0e61cf887 diff --cc Documentation/laptops/00-INDEX index f1fc13d05f3e,df4fb52d4594..fa688538e757 --- a/Documentation/laptops/00-INDEX +++ b/Documentation/laptops/00-INDEX @@@ -2,8 -2,10 +2,12 @@@ - This file acer-wmi.txt - information on the Acer Laptop WMI Extras driver. + asus-laptop.txt + - information on the Asus Laptop Extras driver. + disk-shock-protection.txt + - information on hard disk shock protection. +dslm.c + - Simple Disk Sleep Monitor program laptop-mode.txt - how to conserve battery power using laptop-mode. sony-laptop.txt diff --cc arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h index 652e2bbdaa20,000000000000..dda19da037ad mode 100644,000000..100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h @@@ -1,176 -1,0 +1,176 @@@ +/* linux/arch/arm/plat-s3c/include/plat/gpio-cfg-helper.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C Platform - GPIO pin configuration helper definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* This is meant for core cpu support, machine or other driver files + * should not be including this header. + */ + +#ifndef __PLAT_GPIO_CFG_HELPERS_H +#define __PLAT_GPIO_CFG_HELPERS_H __FILE__ + +/* As a note, all gpio configuration functions are entered exclusively, either + * with the relevant lock held or the system prevented from doing anything else + * by disabling interrupts. +*/ + +static inline int s3c_gpio_do_setcfg(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int config) +{ + return (chip->config->set_config)(chip, off, config); +} + +static inline int s3c_gpio_do_setpull(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull) +{ + return (chip->config->set_pull)(chip, off, pull); +} + +/** + * s3c_gpio_setcfg_s3c24xx - S3C24XX style GPIO configuration. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @cfg: The configuration value to set. + * + * This helper deal with the GPIO cases where the control register + * has two bits of configuration per gpio, which have the following + * functions: + * 00 = input + * 01 = output + * 1x = special function +*/ +extern int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int cfg); + +/** + * s3c_gpio_setcfg_s3c24xx_a - S3C24XX style GPIO configuration (Bank A) + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @cfg: The configuration value to set. + * + * This helper deal with the GPIO cases where the control register + * has one bit of configuration for the gpio, where setting the bit + * means the pin is in special function mode and unset means output. +*/ +extern int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int cfg); + +/** + * s3c_gpio_setcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @cfg: The configuration value to set. + * + * This helper deal with the GPIO cases where the control register has 4 bits + * of control per GPIO, generally in the form of: + * 0000 = Input + * 0001 = Output + * others = Special functions (dependant on bank) + * + * Note, since the code to deal with the case where there are two control - * registers instead of one, we do not have a seperate set of functions for ++ * registers instead of one, we do not have a separate set of functions for + * each case. +*/ +extern int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int cfg); + + +/* Pull-{up,down} resistor controls. + * + * S3C2410,S3C2440,S3C24A0 = Pull-UP, + * S3C2412,S3C2413 = Pull-Down + * S3C6400,S3C6410 = Pull-Both [None,Down,Up,Undef] + * S3C2443 = Pull-Both [not same as S3C6400] + */ + +/** + * s3c_gpio_setpull_1up() - Pull configuration for choice of up or none. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @param: pull: The pull mode being requested. + * + * This is a helper function for the case where we have GPIOs with one + * bit configuring the presence of a pull-up resistor. + */ +extern int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull); + +/** + * s3c_gpio_setpull_1down() - Pull configuration for choice of down or none + * @chip: The gpio chip that is being configured + * @off: The offset for the GPIO being configured + * @param: pull: The pull mode being requested + * + * This is a helper function for the case where we have GPIOs with one + * bit configuring the presence of a pull-down resistor. + */ +extern int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull); + +/** + * s3c_gpio_setpull_upown() - Pull configuration for choice of up, down or none + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @param: pull: The pull mode being requested. + * + * This is a helper function for the case where we have GPIOs with two + * bits configuring the presence of a pull resistor, in the following + * order: + * 00 = No pull resistor connected + * 01 = Pull-up resistor connected + * 10 = Pull-down resistor connected + */ +extern int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull); + + +/** + * s3c_gpio_getpull_updown() - Get configuration for choice of up, down or none + * @chip: The gpio chip that the GPIO pin belongs to + * @off: The offset to the pin to get the configuration of. + * + * This helper function reads the state of the pull-{up,down} resistor for the + * given GPIO in the same case as s3c_gpio_setpull_upown. +*/ +extern s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip, + unsigned int off); + +/** + * s3c_gpio_setpull_s3c2443() - Pull configuration for s3c2443. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @param: pull: The pull mode being requested. + * + * This is a helper function for the case where we have GPIOs with two + * bits configuring the presence of a pull resistor, in the following + * order: + * 00 = Pull-up resistor connected + * 10 = Pull-down resistor connected + * x1 = No pull up resistor + */ +extern int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull); + +/** + * s3c_gpio_getpull_s3c2443() - Get configuration for s3c2443 pull resistors + * @chip: The gpio chip that the GPIO pin belongs to. + * @off: The offset to the pin to get the configuration of. + * + * This helper function reads the state of the pull-{up,down} resistor for the + * given GPIO in the same case as s3c_gpio_setpull_upown. +*/ +extern s3c_gpio_pull_t s3c_gpio_getpull_s3c24xx(struct s3c_gpio_chip *chip, + unsigned int off); + +#endif /* __PLAT_GPIO_CFG_HELPERS_H */ + diff --cc arch/arm/plat-samsung/include/plat/nand.h index 226147b7e026,000000000000..b64115fa93a4 mode 100644,000000..100644 --- a/arch/arm/plat-samsung/include/plat/nand.h +++ b/arch/arm/plat-samsung/include/plat/nand.h @@@ -1,67 -1,0 +1,67 @@@ +/* arch/arm/mach-s3c2410/include/mach/nand.h + * + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks + * - * S3C2410 - NAND device controller platfrom_device info ++ * S3C2410 - NAND device controller platform_device info + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/** + * struct s3c2410_nand_set - define a set of one or more nand chips + * @disable_ecc: Entirely disable ECC - Dangerous + * @flash_bbt: Openmoko u-boot can create a Bad Block Table + * Setting this flag will allow the kernel to + * look for it at boot time and also skip the NAND + * scan. + * @options: Default value to set into 'struct nand_chip' options. + * @nr_chips: Number of chips in this set + * @nr_partitions: Number of partitions pointed to by @partitions + * @name: Name of set (optional) + * @nr_map: Map for low-layer logical to physical chip numbers (option) + * @partitions: The mtd partition list + * + * define a set of one or more nand chips registered with an unique mtd. Also + * allows to pass flag to the underlying NAND layer. 'disable_ecc' will trigger + * a warning at boot time. + */ +struct s3c2410_nand_set { + unsigned int disable_ecc:1; + unsigned int flash_bbt:1; + + unsigned int options; + int nr_chips; + int nr_partitions; + char *name; + int *nr_map; + struct mtd_partition *partitions; + struct nand_ecclayout *ecc_layout; +}; + +struct s3c2410_platform_nand { + /* timing information for controller, all times in nanoseconds */ + + int tacls; /* time for active CLE/ALE to nWE/nOE */ + int twrph0; /* active time for nWE/nOE */ + int twrph1; /* time for release CLE/ALE from nWE/nOE inactive */ + + unsigned int ignore_unset_ecc:1; + + int nr_sets; + struct s3c2410_nand_set *sets; + + void (*select_chip)(struct s3c2410_nand_set *, + int chip); +}; + +/** + * s3c_nand_set_platdata() - register NAND platform data. + * @nand: The NAND platform data to register with s3c_device_nand. + * + * This function copies the given NAND platform data, @nand and registers + * it with the s3c_device_nand. This allows @nand to be __initdata. +*/ +extern void s3c_nand_set_platdata(struct s3c2410_platform_nand *nand); diff --cc arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h index 36a85f5000c8,000000000000..a111ad871833 mode 100644,000000..100644 --- a/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h +++ b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h @@@ -1,50 -1,0 +1,50 @@@ +/* arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C - USB2.0 Highspeed/OtG device PHY registers + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + - /* Note, this is a seperate header file as some of the clock framework ++/* Note, this is a separate header file as some of the clock framework + * needs to touch this if the clk_48m is used as the USB OHCI or other + * peripheral source. +*/ + +#ifndef __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H +#define __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H __FILE__ + +/* S3C64XX_PA_USB_HSPHY */ + +#define S3C_HSOTG_PHYREG(x) ((x) + S3C_VA_USB_HSPHY) + +#define S3C_PHYPWR S3C_HSOTG_PHYREG(0x00) +#define SRC_PHYPWR_OTG_DISABLE (1 << 4) +#define SRC_PHYPWR_ANALOG_POWERDOWN (1 << 3) +#define SRC_PHYPWR_FORCE_SUSPEND (1 << 1) + +#define S3C_PHYCLK S3C_HSOTG_PHYREG(0x04) +#define S3C_PHYCLK_MODE_USB11 (1 << 6) +#define S3C_PHYCLK_EXT_OSC (1 << 5) +#define S3C_PHYCLK_CLK_FORCE (1 << 4) +#define S3C_PHYCLK_ID_PULL (1 << 2) +#define S3C_PHYCLK_CLKSEL_MASK (0x3 << 0) +#define S3C_PHYCLK_CLKSEL_SHIFT (0) +#define S3C_PHYCLK_CLKSEL_48M (0x0 << 0) +#define S3C_PHYCLK_CLKSEL_12M (0x2 << 0) +#define S3C_PHYCLK_CLKSEL_24M (0x3 << 0) + +#define S3C_RSTCON S3C_HSOTG_PHYREG(0x08) +#define S3C_RSTCON_PHYCLK (1 << 2) +#define S3C_RSTCON_HCLK (1 << 2) +#define S3C_RSTCON_PHY (1 << 0) + +#define S3C_PHYTUNE S3C_HSOTG_PHYREG(0x20) + +#endif /* __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H */