From: Johan Hovold Date: Mon, 26 May 2014 17:23:09 +0000 (+0200) Subject: USB: sierra: do not resume I/O on closing ports X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=c2e45d704723723e5691c7b4bcd0ff4aeb813522;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git USB: sierra: do not resume I/O on closing ports Use tty-port initialised flag rather than private flag to determine when port is closing down. Since the tty-port flag is set prior to dropping DTR/RTS (when HUPCL is set) this avoid submitting the read urbs when resuming the interface in dtr_rts() only to immediately kill them again in shutdown(). Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index be4a759b3aed..6f7f01eb556a 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -316,7 +316,6 @@ struct sierra_port_private { int dsr_state; int dcd_state; int ri_state; - unsigned int opened:1; }; static int sierra_send_setup(struct usb_serial_port *port) @@ -769,8 +768,11 @@ static void sierra_close(struct usb_serial_port *port) portdata = usb_get_serial_port_data(port); + /* + * Need to take susp_lock to make sure port is not already being + * resumed, but no need to hold it due to ASYNC_INITIALIZED. + */ spin_lock_irq(&intfdata->susp_lock); - portdata->opened = 0; if (--intfdata->open_ports == 0) serial->interface->needs_remote_wakeup = 0; spin_unlock_irq(&intfdata->susp_lock); @@ -826,7 +828,6 @@ static int sierra_open(struct tty_struct *tty, struct usb_serial_port *port) goto err_submit; spin_lock_irq(&intfdata->susp_lock); - portdata->opened = 1; if (++intfdata->open_ports == 1) serial->interface->needs_remote_wakeup = 1; spin_unlock_irq(&intfdata->susp_lock); @@ -1025,16 +1026,14 @@ static int sierra_resume(struct usb_serial *serial) { struct usb_serial_port *port; struct sierra_intf_private *intfdata = usb_get_serial_data(serial); - struct sierra_port_private *portdata; int ec = 0; int i, err; spin_lock_irq(&intfdata->susp_lock); for (i = 0; i < serial->num_ports; i++) { port = serial->port[i]; - portdata = usb_get_serial_port_data(port); - if (!portdata || !portdata->opened) + if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags)) continue; err = sierra_submit_delayed_urbs(port);