From: Tony Lindgren Date: Wed, 8 Dec 2010 00:26:55 +0000 (-0800) Subject: omap: Fix gpio_request calls to happen as arch_initcall X-Git-Tag: MMI-PSA29.97-13-9~21439^2~46^2~12 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=c2cdaffe0bb32015e84af8e31f73e620ba271165;p=GitHub%2FMotorolaMobilityLLC%2Fkernel-slsi.git omap: Fix gpio_request calls to happen as arch_initcall Looks like some boards are calling gpio_request from init_irq. This will make the request_irq fail, as GPIO will be initialized as postcore_initcall. Reported-by: Paul Walmsley Signed-off-by: Tony Lindgren --- diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 149fdd32e127..295ab6713670 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -120,6 +120,15 @@ static struct resource smc91x_resources[] = { }, }; +static void __init fsample_init_smc91x(void) +{ + fpga_write(1, H2P2_DBG_FPGA_LAN_RESET); + mdelay(50); + fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1, + H2P2_DBG_FPGA_LAN_RESET); + mdelay(50); +} + static struct mtd_partition nor_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { @@ -285,6 +294,8 @@ static struct omap_board_config_kernel fsample_config[] = { static void __init omap_fsample_init(void) { + fsample_init_smc91x(); + if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0) BUG(); gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN); @@ -312,21 +323,11 @@ static void __init omap_fsample_init(void) omap_register_i2c_bus(1, 100, NULL, 0); } -static void __init fsample_init_smc91x(void) -{ - fpga_write(1, H2P2_DBG_FPGA_LAN_RESET); - mdelay(50); - fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1, - H2P2_DBG_FPGA_LAN_RESET); - mdelay(50); -} - static void __init omap_fsample_init_irq(void) { omap1_init_common_hw(); omap_init_irq(); omap_gpio_init(); - fsample_init_smc91x(); } /* Only FPGA needs to be mapped here. All others are done with ioremap */ diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 197adb49dc5a..dd35efdefcf7 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -375,7 +375,6 @@ static void __init h2_init_irq(void) omap1_init_common_hw(); omap_init_irq(); omap_gpio_init(); - h2_init_smc91x(); } static struct omap_usb_config h2_usb_config __initdata = { @@ -403,6 +402,8 @@ static struct omap_board_config_kernel h2_config[] __initdata = { static void __init h2_init(void) { + h2_init_smc91x(); + /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped * to address 0 by a dip switch), NAND on CS2B. The NAND driver will * notice whether a NAND chip is enabled at probe time. diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 9126e3e37b4a..78719198809e 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -264,6 +264,15 @@ static struct platform_device smc91x_device = { .resource = smc91x_resources, }; +static void __init h3_init_smc91x(void) +{ + omap_cfg_reg(W15_1710_GPIO40); + if (gpio_request(40, "SMC91x irq") < 0) { + printk("Error requesting gpio 40 for smc91x irq\n"); + return; + } +} + #define GPTIMER_BASE 0xFFFB1400 #define GPTIMER_REGS(x) (0xFFFB1400 + (x * 0x800)) #define GPTIMER_REGS_SIZE 0x46 @@ -376,6 +385,8 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = { static void __init h3_init(void) { + h3_init_smc91x(); + /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped * to address 0 by a dip switch), NAND on CS2B. The NAND driver will * notice whether a NAND chip is enabled at probe time. @@ -422,21 +433,11 @@ static void __init h3_init(void) h3_mmc_init(); } -static void __init h3_init_smc91x(void) -{ - omap_cfg_reg(W15_1710_GPIO40); - if (gpio_request(40, "SMC91x irq") < 0) { - printk("Error requesting gpio 40 for smc91x irq\n"); - return; - } -} - static void __init h3_init_irq(void) { omap1_init_common_hw(); omap_init_irq(); omap_gpio_init(); - h3_init_smc91x(); } static void __init h3_map_io(void) diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index dc2b86fd66c1..0feaa6731c7e 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -296,7 +296,6 @@ static void __init innovator_init_irq(void) omap1510_fpga_init_irq(); } #endif - innovator_init_smc91x(); } #ifdef CONFIG_ARCH_OMAP15XX @@ -387,6 +386,8 @@ static struct omap_board_config_kernel innovator_config[] = { static void __init innovator_init(void) { + innovator_init_smc91x(); + #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { unsigned char reg; diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index e9dd79149a8e..30bdbdb93636 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -284,8 +284,6 @@ static void __init osk_init_irq(void) omap1_init_common_hw(); omap_init_irq(); omap_gpio_init(); - osk_init_smc91x(); - osk_init_cf(); } static struct omap_usb_config osk_usb_config __initdata = { @@ -541,6 +539,9 @@ static void __init osk_init(void) { u32 l; + osk_init_smc91x(); + osk_init_cf(); + /* Workaround for wrong CS3 (NOR flash) timing * There are some U-Boot versions out there which configure * wrong CS3 memory timings. This mainly leads to CRC diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index a8d16a255c18..07660be4f228 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -251,8 +251,19 @@ static struct omap_board_config_kernel perseus2_config[] __initdata = { { OMAP_TAG_LCD, &perseus2_lcd_config }, }; +static void __init perseus2_init_smc91x(void) +{ + fpga_write(1, H2P2_DBG_FPGA_LAN_RESET); + mdelay(50); + fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1, + H2P2_DBG_FPGA_LAN_RESET); + mdelay(50); +} + static void __init omap_perseus2_init(void) { + perseus2_init_smc91x(); + if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0) BUG(); gpio_direction_input(P2_NAND_RB_GPIO_PIN); @@ -280,21 +291,11 @@ static void __init omap_perseus2_init(void) omap_register_i2c_bus(1, 100, NULL, 0); } -static void __init perseus2_init_smc91x(void) -{ - fpga_write(1, H2P2_DBG_FPGA_LAN_RESET); - mdelay(50); - fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1, - H2P2_DBG_FPGA_LAN_RESET); - mdelay(50); -} - static void __init omap_perseus2_init_irq(void) { omap1_init_common_hw(); omap_init_irq(); omap_gpio_init(); - perseus2_init_smc91x(); } /* Only FPGA needs to be mapped here. All others are done with ioremap */ static struct map_desc omap_perseus2_io_desc[] __initdata = { diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 2c6db1aaeb29..6ae777e08896 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -281,7 +281,6 @@ static void __init omap_apollon_init_irq(void) omap2_init_common_hw(NULL, NULL); omap_init_irq(); omap_gpio_init(); - apollon_init_smc91x(); } static void __init apollon_led_init(void) @@ -324,6 +323,7 @@ static void __init omap_apollon_init(void) omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC); + apollon_init_smc91x(); apollon_led_init(); apollon_flash_init(); apollon_usb_init(); diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 001fd9713f39..3dab44e3eb42 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -295,7 +295,6 @@ static void __init omap_ldp_init_irq(void) omap2_init_common_hw(NULL, NULL); omap_init_irq(); omap_gpio_init(); - ldp_init_smsc911x(); } static struct twl4030_usb_data ldp_usb_data = { @@ -426,6 +425,7 @@ static struct mtd_partition ldp_nand_partitions[] = { static void __init omap_ldp_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + ldp_init_smsc911x(); omap_i2c_init(); platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices)); ts_gpio = 54;