From: Florian Fainelli Date: Mon, 8 Oct 2012 13:11:33 +0000 (+0200) Subject: USB: OHCI: remove CNS3xxx OHCI platform driver X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=c23920b05be41998dc8e5796eb874df098a97e9f;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git USB: OHCI: remove CNS3xxx OHCI platform driver All users have been converted to use the OHCI platform driver instead, thus making ohci-cns3xxx, so remove it. Signed-off-by: Florian Fainelli Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index d21c0070b05f..e43c9c8c185d 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -400,9 +400,13 @@ config USB_OHCI_EXYNOS Enable support for the Samsung Exynos SOC's on-chip OHCI controller. config USB_CNS3XXX_OHCI - bool "Cavium CNS3XXX OHCI Module" + bool "Cavium CNS3XXX OHCI Module (DEPRECATED)" depends on USB_OHCI_HCD && ARCH_CNS3XXX + select USB_OHCI_HCD_PLATFORM ---help--- + This option is deprecated now and the driver was removed, use + USB_OHCI_HCD_PLATFORM instead. + Enable support for the CNS3XXX SOC's on-chip OHCI controller. It is needed for low-speed USB 1.0 device support. diff --git a/drivers/usb/host/ohci-cns3xxx.c b/drivers/usb/host/ohci-cns3xxx.c deleted file mode 100644 index 2c9f233047be..000000000000 --- a/drivers/usb/host/ohci-cns3xxx.c +++ /dev/null @@ -1,166 +0,0 @@ -/* - * Copyright 2008 Cavium Networks - * - * This file is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, Version 2, as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include - -static int __devinit -cns3xxx_ohci_start(struct usb_hcd *hcd) -{ - struct ohci_hcd *ohci = hcd_to_ohci(hcd); - int ret; - - /* - * EHCI and OHCI share the same clock and power, - * resetting twice would cause the 1st controller been reset. - * Therefore only do power up at the first up device, and - * power down at the last down device. - * - * Set USB AHB INCR length to 16 - */ - if (atomic_inc_return(&usb_pwr_ref) == 1) { - cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB); - cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST); - cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST); - __raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)), - MISC_CHIP_CONFIG_REG); - } - - ret = ohci_init(ohci); - if (ret < 0) - return ret; - - ohci->num_ports = 1; - - ret = ohci_run(ohci); - if (ret < 0) { - dev_err(hcd->self.controller, "can't start %s\n", - hcd->self.bus_name); - ohci_stop(hcd); - return ret; - } - return 0; -} - -static const struct hc_driver cns3xxx_ohci_hc_driver = { - .description = hcd_name, - .product_desc = "CNS3XXX OHCI Host controller", - .hcd_priv_size = sizeof(struct ohci_hcd), - .irq = ohci_irq, - .flags = HCD_USB11 | HCD_MEMORY, - .start = cns3xxx_ohci_start, - .stop = ohci_stop, - .shutdown = ohci_shutdown, - .urb_enqueue = ohci_urb_enqueue, - .urb_dequeue = ohci_urb_dequeue, - .endpoint_disable = ohci_endpoint_disable, - .get_frame_number = ohci_get_frame, - .hub_status_data = ohci_hub_status_data, - .hub_control = ohci_hub_control, -#ifdef CONFIG_PM - .bus_suspend = ohci_bus_suspend, - .bus_resume = ohci_bus_resume, -#endif - .start_port_reset = ohci_start_port_reset, -}; - -static int cns3xxx_ohci_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct usb_hcd *hcd; - const struct hc_driver *driver = &cns3xxx_ohci_hc_driver; - struct resource *res; - int irq; - int retval; - - if (usb_disabled()) - return -ENODEV; - - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res) { - dev_err(dev, "Found HC with no IRQ.\n"); - return -ENODEV; - } - irq = res->start; - - hcd = usb_create_hcd(driver, dev, dev_name(dev)); - if (!hcd) - return -ENOMEM; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "Found HC with no register addr.\n"); - retval = -ENODEV; - goto err1; - } - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); - - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, - driver->description)) { - dev_dbg(dev, "controller already in use\n"); - retval = -EBUSY; - goto err1; - } - - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); - if (!hcd->regs) { - dev_dbg(dev, "error mapping memory\n"); - retval = -EFAULT; - goto err2; - } - - ohci_hcd_init(hcd_to_ohci(hcd)); - - retval = usb_add_hcd(hcd, irq, IRQF_SHARED); - if (retval == 0) - return retval; - - iounmap(hcd->regs); -err2: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -err1: - usb_put_hcd(hcd); - return retval; -} - -static int cns3xxx_ohci_remove(struct platform_device *pdev) -{ - struct usb_hcd *hcd = platform_get_drvdata(pdev); - - usb_remove_hcd(hcd); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); - - /* - * EHCI and OHCI share the same clock and power, - * resetting twice would cause the 1st controller been reset. - * Therefore only do power up at the first up device, and - * power down at the last down device. - */ - if (atomic_dec_return(&usb_pwr_ref) == 0) - cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST); - - usb_put_hcd(hcd); - - platform_set_drvdata(pdev, NULL); - - return 0; -} - -MODULE_ALIAS("platform:cns3xxx-ohci"); - -static struct platform_driver ohci_hcd_cns3xxx_driver = { - .probe = cns3xxx_ohci_probe, - .remove = cns3xxx_ohci_remove, - .driver = { - .name = "cns3xxx-ohci", - }, -}; diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index b8f2ead7e5c2..d35fc1e788dc 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1196,11 +1196,6 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ohci_hcd_tilegx_driver #endif -#ifdef CONFIG_USB_CNS3XXX_OHCI -#include "ohci-cns3xxx.c" -#define PLATFORM_DRIVER ohci_hcd_cns3xxx_driver -#endif - #ifdef CONFIG_CPU_XLR #include "ohci-xls.c" #define PLATFORM_DRIVER ohci_xls_driver