From: Johannes Tenschert Date: Wed, 7 Dec 2011 17:25:06 +0000 (+0100) Subject: staging: bcm: led_control.c: fix whitespaces X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=c1eb22d0f33c6b8accbe244181ce6b4c47b69e5d;p=GitHub%2FLineageOS%2Fandroid_kernel_samsung_universal7580.git staging: bcm: led_control.c: fix whitespaces Signed-off-by: Johannes Tenschert Reviewed-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/bcm/led_control.c b/drivers/staging/bcm/led_control.c index 16e939fa15d..0fe2b8e63f3 100644 --- a/drivers/staging/bcm/led_control.c +++ b/drivers/staging/bcm/led_control.c @@ -5,18 +5,19 @@ static B_UINT16 CFG_CalculateChecksum(B_UINT8 *pu8Buffer, B_UINT32 u32Size) { - B_UINT16 u16CheckSum=0; - while(u32Size--) { + B_UINT16 u16CheckSum = 0; + while (u32Size--) { u16CheckSum += (B_UINT8)~(*pu8Buffer); - pu8Buffer++; + pu8Buffer++; } return u16CheckSum; } + BOOLEAN IsReqGpioIsLedInNVM(PMINI_ADAPTER Adapter, UINT gpios) { - INT Status ; - Status = (Adapter->gpioBitMap & gpios) ^ gpios ; - if(Status) + INT Status; + Status = (Adapter->gpioBitMap & gpios) ^ gpios; + if (Status) return FALSE; else return TRUE; @@ -28,15 +29,15 @@ static INT LED_Blink(PMINI_ADAPTER Adapter, UINT GPIO_Num, UCHAR uiLedIndex, ULO BOOLEAN bInfinite = FALSE; /*Check if num_of_time is -ve. If yes, blink led in infinite loop*/ - if(num_of_time < 0) + if (num_of_time < 0) { bInfinite = TRUE; num_of_time = 1; } - while(num_of_time) + while (num_of_time) { - if(currdriverstate == Adapter->DriverState) + if (currdriverstate == Adapter->DriverState) TURN_ON_LED(GPIO_Num, uiLedIndex); /*Wait for timeout after setting on the LED*/ @@ -44,26 +45,26 @@ static INT LED_Blink(PMINI_ADAPTER Adapter, UINT GPIO_Num, UCHAR uiLedIndex, ULO currdriverstate != Adapter->DriverState || kthread_should_stop(), msecs_to_jiffies(timeout)); - if(kthread_should_stop()) + if (kthread_should_stop()) { - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Led thread got signal to exit..hence exiting"); - Adapter->LEDInfo.led_thread_running= BCM_LED_THREAD_DISABLED; + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Led thread got signal to exit..hence exiting"); + Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_DISABLED; TURN_OFF_LED(GPIO_Num, uiLedIndex); - Status=EVENT_SIGNALED; + Status = EVENT_SIGNALED; break; } - if(Status) + if (Status) { TURN_OFF_LED(GPIO_Num, uiLedIndex); - Status=EVENT_SIGNALED; + Status = EVENT_SIGNALED; break; } TURN_OFF_LED(GPIO_Num, uiLedIndex); Status = wait_event_interruptible_timeout(Adapter->LEDInfo.notify_led_event, - currdriverstate!= Adapter->DriverState || kthread_should_stop(), + currdriverstate != Adapter->DriverState || kthread_should_stop(), msecs_to_jiffies(timeout)); - if(bInfinite == FALSE) + if (bInfinite == FALSE) num_of_time--; } return Status; @@ -71,19 +72,19 @@ static INT LED_Blink(PMINI_ADAPTER Adapter, UINT GPIO_Num, UCHAR uiLedIndex, ULO static INT ScaleRateofTransfer(ULONG rate) { - if(rate <= 3) + if (rate <= 3) return rate; - else if((rate > 3) && (rate <= 100)) + else if ((rate > 3) && (rate <= 100)) return 5; - else if((rate > 100) && (rate <= 200)) + else if ((rate > 100) && (rate <= 200)) return 6; - else if((rate > 200) && (rate <= 300)) + else if ((rate > 200) && (rate <= 300)) return 7; - else if((rate > 300) && (rate <= 400)) + else if ((rate > 300) && (rate <= 400)) return 8; - else if((rate > 400) && (rate <= 500)) + else if ((rate > 400) && (rate <= 500)) return 9; - else if((rate > 500) && (rate <= 600)) + else if ((rate > 500) && (rate <= 600)) return 10; else return MAX_NUM_OF_BLINKS; @@ -112,29 +113,29 @@ static INT LED_Proportional_Blink(PMINI_ADAPTER Adapter, UCHAR GPIO_Num_tx, Initial_num_of_packts_rx = Adapter->dev->stats.rx_packets; /*Scale the rate of transfer to no of blinks.*/ - num_of_time_tx= ScaleRateofTransfer((ULONG)rate_of_transfer_tx); - num_of_time_rx= ScaleRateofTransfer((ULONG)rate_of_transfer_rx); + num_of_time_tx = ScaleRateofTransfer((ULONG)rate_of_transfer_tx); + num_of_time_rx = ScaleRateofTransfer((ULONG)rate_of_transfer_rx); - while((Adapter->device_removed == FALSE)) + while ((Adapter->device_removed == FALSE)) { timeout = 50; /*Blink Tx and Rx LED when both Tx and Rx is in normal bandwidth*/ - if(bBlinkBothLED) + if (bBlinkBothLED) { /*Assign minimum number of blinks of either Tx or Rx.*/ - if(num_of_time_tx > num_of_time_rx) + if (num_of_time_tx > num_of_time_rx) num_of_time = num_of_time_rx; else num_of_time = num_of_time_tx; - if(num_of_time > 0) + if (num_of_time > 0) { /*Blink both Tx and Rx LEDs*/ - if(LED_Blink(Adapter, 1< 0) + if (remDelay > 0) { - timeout= 100 * remDelay; + timeout = 100 * remDelay; Status = wait_event_interruptible_timeout(Adapter->LEDInfo.notify_led_event, - currdriverstate!= Adapter->DriverState ||kthread_should_stop() , - msecs_to_jiffies (timeout)); + currdriverstate != Adapter->DriverState || kthread_should_stop(), + msecs_to_jiffies(timeout)); - if(kthread_should_stop()) + if (kthread_should_stop()) { - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Led thread got signal to exit..hence exiting"); - Adapter->LEDInfo.led_thread_running= BCM_LED_THREAD_DISABLED; + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Led thread got signal to exit..hence exiting"); + Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_DISABLED; return EVENT_SIGNALED; } - if(Status) + if (Status) return EVENT_SIGNALED; } /*Turn off both Tx and Rx LEDs before next second*/ - TURN_OFF_LED(1<dev->stats.tx_packets; Final_num_of_packts_rx = Adapter->dev->stats.rx_packets; @@ -221,11 +222,11 @@ static INT LED_Proportional_Blink(PMINI_ADAPTER Adapter, UCHAR GPIO_Num_tx, /*Read initial value of packets sent/received */ Initial_num_of_packts_tx = Final_num_of_packts_tx; - Initial_num_of_packts_rx = Final_num_of_packts_rx ; + Initial_num_of_packts_rx = Final_num_of_packts_rx; /*Scale the rate of transfer to no of blinks.*/ - num_of_time_tx= ScaleRateofTransfer((ULONG)rate_of_transfer_tx); - num_of_time_rx= ScaleRateofTransfer((ULONG)rate_of_transfer_rx); + num_of_time_tx = ScaleRateofTransfer((ULONG)rate_of_transfer_tx); + num_of_time_rx = ScaleRateofTransfer((ULONG)rate_of_transfer_rx); } return Status; @@ -246,22 +247,19 @@ static INT LED_Proportional_Blink(PMINI_ADAPTER Adapter, UCHAR GPIO_Num_tx, // //----------------------------------------------------------------------------- -static INT ValidateDSDParamsChecksum( - PMINI_ADAPTER Adapter, - ULONG ulParamOffset, - USHORT usParamLen ) +static INT ValidateDSDParamsChecksum(PMINI_ADAPTER Adapter, ULONG ulParamOffset, USHORT usParamLen) { INT Status = STATUS_SUCCESS; - PUCHAR puBuffer = NULL; - USHORT usChksmOrg = 0; + PUCHAR puBuffer = NULL; + USHORT usChksmOrg = 0; USHORT usChecksumCalculated = 0; - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"LED Thread:ValidateDSDParamsChecksum: 0x%lx 0x%X",ulParamOffset, usParamLen); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread:ValidateDSDParamsChecksum: 0x%lx 0x%X", ulParamOffset, usParamLen); puBuffer = kmalloc(usParamLen, GFP_KERNEL); - if(!puBuffer) + if (!puBuffer) { - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"LED Thread: ValidateDSDParamsChecksum Allocation failed"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: ValidateDSDParamsChecksum Allocation failed"); return -ENOMEM; } @@ -269,38 +267,38 @@ static INT ValidateDSDParamsChecksum( // // Read the DSD data from the parameter offset. // - if(STATUS_SUCCESS != BeceemNVMRead(Adapter,(PUINT)puBuffer,ulParamOffset,usParamLen)) + if (STATUS_SUCCESS != BeceemNVMRead(Adapter, (PUINT)puBuffer, ulParamOffset, usParamLen)) { - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"LED Thread: ValidateDSDParamsChecksum BeceemNVMRead failed"); - Status=STATUS_IMAGE_CHECKSUM_MISMATCH; + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: ValidateDSDParamsChecksum BeceemNVMRead failed"); + Status = STATUS_IMAGE_CHECKSUM_MISMATCH; goto exit; } // // Calculate the checksum of the data read from the DSD parameter. // - usChecksumCalculated = CFG_CalculateChecksum(puBuffer,usParamLen); - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"LED Thread: usCheckSumCalculated = 0x%x\n", usChecksumCalculated); + usChecksumCalculated = CFG_CalculateChecksum(puBuffer, usParamLen); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: usCheckSumCalculated = 0x%x\n", usChecksumCalculated); // // End of the DSD parameter will have a TWO bytes checksum stored in it. Read it and compare with the calculated // Checksum. // - if(STATUS_SUCCESS != BeceemNVMRead(Adapter,(PUINT)&usChksmOrg,ulParamOffset+usParamLen,2)) + if (STATUS_SUCCESS != BeceemNVMRead(Adapter, (PUINT)&usChksmOrg, ulParamOffset+usParamLen, 2)) { - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"LED Thread: ValidateDSDParamsChecksum BeceemNVMRead failed"); - Status=STATUS_IMAGE_CHECKSUM_MISMATCH; + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: ValidateDSDParamsChecksum BeceemNVMRead failed"); + Status = STATUS_IMAGE_CHECKSUM_MISMATCH; goto exit; } usChksmOrg = ntohs(usChksmOrg); - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"LED Thread: usChksmOrg = 0x%x", usChksmOrg); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: usChksmOrg = 0x%x", usChksmOrg); // // Compare the checksum calculated with the checksum read from DSD section // - if(usChecksumCalculated ^ usChksmOrg) + if (usChecksumCalculated ^ usChksmOrg) { - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"LED Thread: ValidateDSDParamsChecksum: Checksums don't match"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: ValidateDSDParamsChecksum: Checksums don't match"); Status = STATUS_IMAGE_CHECKSUM_MISMATCH; goto exit; } @@ -327,21 +325,21 @@ exit: static INT ValidateHWParmStructure(PMINI_ADAPTER Adapter, ULONG ulHwParamOffset) { - INT Status = STATUS_SUCCESS ; + INT Status = STATUS_SUCCESS; USHORT HwParamLen = 0; // Add DSD start offset to the hwParamOffset to get the actual address. ulHwParamOffset += DSD_START_OFFSET; /*Read the Length of HW_PARAM structure*/ - BeceemNVMRead(Adapter,(PUINT)&HwParamLen,ulHwParamOffset,2); + BeceemNVMRead(Adapter, (PUINT)&HwParamLen, ulHwParamOffset, 2); HwParamLen = ntohs(HwParamLen); - if(0==HwParamLen || HwParamLen > Adapter->uiNVMDSDSize) + if (0 == HwParamLen || HwParamLen > Adapter->uiNVMDSDSize) { return STATUS_IMAGE_CHECKSUM_MISMATCH; } - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread:HwParamLen = 0x%x", HwParamLen); - Status =ValidateDSDParamsChecksum(Adapter,ulHwParamOffset,HwParamLen); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread:HwParamLen = 0x%x", HwParamLen); + Status = ValidateDSDParamsChecksum(Adapter, ulHwParamOffset, HwParamLen); return Status; } /* ValidateHWParmStructure() */ @@ -349,20 +347,20 @@ static int ReadLEDInformationFromEEPROM(PMINI_ADAPTER Adapter, UCHAR GPIO_Array[ { int Status = STATUS_SUCCESS; - ULONG dwReadValue = 0; - USHORT usHwParamData = 0; - USHORT usEEPROMVersion = 0; - UCHAR ucIndex = 0; - UCHAR ucGPIOInfo[32] = {0}; + ULONG dwReadValue = 0; + USHORT usHwParamData = 0; + USHORT usEEPROMVersion = 0; + UCHAR ucIndex = 0; + UCHAR ucGPIOInfo[32] = {0}; - BeceemNVMRead(Adapter,(PUINT)&usEEPROMVersion,EEPROM_VERSION_OFFSET,2); + BeceemNVMRead(Adapter, (PUINT)&usEEPROMVersion, EEPROM_VERSION_OFFSET, 2); - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"usEEPROMVersion: Minor:0x%X Major:0x%x",usEEPROMVersion&0xFF, ((usEEPROMVersion>>8)&0xFF)); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "usEEPROMVersion: Minor:0x%X Major:0x%x", usEEPROMVersion&0xFF, ((usEEPROMVersion>>8)&0xFF)); - if(((usEEPROMVersion>>8)&0xFF) < EEPROM_MAP5_MAJORVERSION) + if (((usEEPROMVersion>>8)&0xFF) < EEPROM_MAP5_MAJORVERSION) { - BeceemNVMRead(Adapter,(PUINT)&usHwParamData,EEPROM_HW_PARAM_POINTER_ADDRESS,2); + BeceemNVMRead(Adapter, (PUINT)&usHwParamData, EEPROM_HW_PARAM_POINTER_ADDRESS, 2); usHwParamData = ntohs(usHwParamData); dwReadValue = usHwParamData; } @@ -372,19 +370,19 @@ static int ReadLEDInformationFromEEPROM(PMINI_ADAPTER Adapter, UCHAR GPIO_Array[ // Validate Compatibility section and then read HW param if compatibility section is valid. // Status = ValidateDSDParamsChecksum(Adapter, - DSD_START_OFFSET, - COMPATIBILITY_SECTION_LENGTH_MAP5); + DSD_START_OFFSET, + COMPATIBILITY_SECTION_LENGTH_MAP5); - if(Status != STATUS_SUCCESS) + if (Status != STATUS_SUCCESS) { return Status; } - BeceemNVMRead(Adapter,(PUINT)&dwReadValue,EEPROM_HW_PARAM_POINTER_ADDRRES_MAP5,4); + BeceemNVMRead(Adapter, (PUINT)&dwReadValue, EEPROM_HW_PARAM_POINTER_ADDRRES_MAP5, 4); dwReadValue = ntohl(dwReadValue); } - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"LED Thread: Start address of HW_PARAM structure = 0x%lx",dwReadValue); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: Start address of HW_PARAM structure = 0x%lx", dwReadValue); // // Validate if the address read out is within the DSD. @@ -392,14 +390,14 @@ static int ReadLEDInformationFromEEPROM(PMINI_ADAPTER Adapter, UCHAR GPIO_Array[ // lower limit should be above DSD_START_OFFSET and // upper limit should be below (Adapter->uiNVMDSDSize-DSD_START_OFFSET) // - if(dwReadValue < DSD_START_OFFSET || - dwReadValue > (Adapter->uiNVMDSDSize-DSD_START_OFFSET)) + if (dwReadValue < DSD_START_OFFSET || + dwReadValue > (Adapter->uiNVMDSDSize-DSD_START_OFFSET)) { return STATUS_IMAGE_CHECKSUM_MISMATCH; } Status = ValidateHWParmStructure(Adapter, dwReadValue); - if(Status){ + if (Status) { return Status; } @@ -413,36 +411,36 @@ static int ReadLEDInformationFromEEPROM(PMINI_ADAPTER Adapter, UCHAR GPIO_Array[ dwReadValue += GPIO_SECTION_START_OFFSET; // = GPIO start offset within HW Param section. /* Read the GPIO values for 32 GPIOs from EEPROM and map the function - * number to GPIO pin number to GPIO_Array - */ - BeceemNVMRead(Adapter, (UINT *)ucGPIOInfo,dwReadValue,32); - for(ucIndex = 0; ucIndex < 32; ucIndex++) - { + * number to GPIO pin number to GPIO_Array + */ + BeceemNVMRead(Adapter, (UINT *)ucGPIOInfo, dwReadValue, 32); + for (ucIndex = 0; ucIndex < 32; ucIndex++) + { - switch(ucGPIOInfo[ucIndex]) + switch (ucGPIOInfo[ucIndex]) { case RED_LED: { - GPIO_Array[RED_LED] = ucIndex; - Adapter->gpioBitMap |= (1<gpioBitMap |= (1 << ucIndex); break; } case BLUE_LED: { GPIO_Array[BLUE_LED] = ucIndex; - Adapter->gpioBitMap |= (1<gpioBitMap |= (1 << ucIndex); break; } case YELLOW_LED: { - GPIO_Array[YELLOW_LED] = ucIndex; - Adapter->gpioBitMap |= (1<gpioBitMap |= (1 << ucIndex); + break; } case GREEN_LED: { GPIO_Array[GREEN_LED] = ucIndex; - Adapter->gpioBitMap |= (1<gpioBitMap |= (1 << ucIndex); break; } default: @@ -450,8 +448,8 @@ static int ReadLEDInformationFromEEPROM(PMINI_ADAPTER Adapter, UCHAR GPIO_Array[ } } - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"GPIO's bit map correspond to LED :0x%X",Adapter->gpioBitMap); - return Status; + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "GPIO's bit map correspond to LED :0x%X", Adapter->gpioBitMap); + return Status; } @@ -465,21 +463,21 @@ static int ReadConfigFileStructure(PMINI_ADAPTER Adapter, BOOLEAN *bEnableThread UCHAR bData = 0; memset(GPIO_Array, DISABLE_GPIO_NUM, NUM_OF_LEDS+1); - if(!Adapter->pstargetparams || IS_ERR(Adapter->pstargetparams)) + if (!Adapter->pstargetparams || IS_ERR(Adapter->pstargetparams)) { - BCM_DEBUG_PRINT (Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Target Params not Avail.\n"); + BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Target Params not Avail.\n"); return -ENOENT; } /*Populate GPIO_Array with GPIO numbers for LED functions*/ /*Read the GPIO numbers from EEPROM*/ Status = ReadLEDInformationFromEEPROM(Adapter, GPIO_Array); - if(Status == STATUS_IMAGE_CHECKSUM_MISMATCH) + if (Status == STATUS_IMAGE_CHECKSUM_MISMATCH) { *bEnableThread = FALSE; return STATUS_SUCCESS; } - else if(Status) + else if (Status) { *bEnableThread = FALSE; return Status; @@ -488,21 +486,21 @@ static int ReadConfigFileStructure(PMINI_ADAPTER Adapter, BOOLEAN *bEnableThread * CONFIG file read successfully. Deallocate the memory of * uiFileNameBufferSize */ - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"LED Thread: Config file read successfully\n"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: Config file read successfully\n"); puCFGData = (PUCHAR) &Adapter->pstargetparams->HostDrvrConfig1; /* - * Offset for HostDrvConfig1, HostDrvConfig2, HostDrvConfig3 which - * will have the information of LED type, LED on state for different - * driver state and LED blink state. - */ + * Offset for HostDrvConfig1, HostDrvConfig2, HostDrvConfig3 which + * will have the information of LED type, LED on state for different + * driver state and LED blink state. + */ - for(uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) + for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) { bData = *puCFGData; /*Check Bit 8 for polarity. If it is set, polarity is reverse polarity*/ - if(bData & 0x80) + if (bData & 0x80) { Adapter->LEDInfo.LEDState[uiIndex].BitPolarity = 0; /*unset the bit 8*/ @@ -510,7 +508,7 @@ static int ReadConfigFileStructure(PMINI_ADAPTER Adapter, BOOLEAN *bEnableThread } Adapter->LEDInfo.LEDState[uiIndex].LED_Type = bData; - if(bData <= NUM_OF_LEDS) + if (bData <= NUM_OF_LEDS) Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num = GPIO_Array[bData]; else Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num = DISABLE_GPIO_NUM; @@ -520,19 +518,19 @@ static int ReadConfigFileStructure(PMINI_ADAPTER Adapter, BOOLEAN *bEnableThread Adapter->LEDInfo.LEDState[uiIndex].LED_On_State = bData; puCFGData++; bData = *puCFGData; - Adapter->LEDInfo.LEDState[uiIndex].LED_Blink_State= bData; + Adapter->LEDInfo.LEDState[uiIndex].LED_Blink_State = bData; puCFGData++; } /*Check if all the LED settings are disabled. If it is disabled, dont launch the LED control thread.*/ - for(uiIndex = 0; uiIndexLEDInfo.LEDState[uiIndex].LED_Type == DISABLE_GPIO_NUM) || - (Adapter->LEDInfo.LEDState[uiIndex].LED_Type == 0x7f) || + if ((Adapter->LEDInfo.LEDState[uiIndex].LED_Type == DISABLE_GPIO_NUM) || + (Adapter->LEDInfo.LEDState[uiIndex].LED_Type == 0x7f) || (Adapter->LEDInfo.LEDState[uiIndex].LED_Type == 0)) uiNum_of_LED_Type++; } - if(uiNum_of_LED_Type >= NUM_OF_LEDS) + if (uiNum_of_LED_Type >= NUM_OF_LEDS) *bEnableThread = FALSE; return Status; @@ -556,40 +554,40 @@ static VOID LedGpioInit(PMINI_ADAPTER Adapter) UINT uiIndex = 0; /* Set all LED GPIO Mode to output mode */ - if(rdmalt(Adapter, GPIO_MODE_REGISTER, &uiResetValue, sizeof(uiResetValue)) <0) - BCM_DEBUG_PRINT (Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"LED Thread: RDM Failed\n"); - for(uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) + if (rdmalt(Adapter, GPIO_MODE_REGISTER, &uiResetValue, sizeof(uiResetValue)) < 0) + BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: RDM Failed\n"); + for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) { - if(Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM) + if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM) uiResetValue |= (1 << Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num); - TURN_OFF_LED(1<LEDInfo.LEDState[uiIndex].GPIO_Num,uiIndex); + TURN_OFF_LED(1 << Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num, uiIndex); } - if(wrmalt(Adapter, GPIO_MODE_REGISTER, &uiResetValue, sizeof(uiResetValue)) < 0) - BCM_DEBUG_PRINT (Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"LED Thread: WRM Failed\n"); + if (wrmalt(Adapter, GPIO_MODE_REGISTER, &uiResetValue, sizeof(uiResetValue)) < 0) + BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: WRM Failed\n"); - Adapter->LEDInfo.bIdle_led_off = FALSE; + Adapter->LEDInfo.bIdle_led_off = FALSE; } //----------------------------------------------------------------------------- -static INT BcmGetGPIOPinInfo(PMINI_ADAPTER Adapter, UCHAR *GPIO_num_tx, UCHAR *GPIO_num_rx ,UCHAR *uiLedTxIndex, UCHAR *uiLedRxIndex,LedEventInfo_t currdriverstate) +static INT BcmGetGPIOPinInfo(PMINI_ADAPTER Adapter, UCHAR *GPIO_num_tx, UCHAR *GPIO_num_rx, UCHAR *uiLedTxIndex, UCHAR *uiLedRxIndex, LedEventInfo_t currdriverstate) { UINT uiIndex = 0; *GPIO_num_tx = DISABLE_GPIO_NUM; *GPIO_num_rx = DISABLE_GPIO_NUM; - for(uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) + for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) { - if((currdriverstate == NORMAL_OPERATION)|| - (currdriverstate == IDLEMODE_EXIT)|| + if ((currdriverstate == NORMAL_OPERATION) || + (currdriverstate == IDLEMODE_EXIT) || (currdriverstate == FW_DOWNLOAD)) { - if(Adapter->LEDInfo.LEDState[uiIndex].LED_Blink_State & currdriverstate) + if (Adapter->LEDInfo.LEDState[uiIndex].LED_Blink_State & currdriverstate) { - if(Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM) + if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM) { - if(*GPIO_num_tx == DISABLE_GPIO_NUM) + if (*GPIO_num_tx == DISABLE_GPIO_NUM) { *GPIO_num_tx = Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num; *uiLedTxIndex = uiIndex; @@ -604,9 +602,9 @@ static INT BcmGetGPIOPinInfo(PMINI_ADAPTER Adapter, UCHAR *GPIO_num_tx, UCHAR *G } else { - if(Adapter->LEDInfo.LEDState[uiIndex].LED_On_State & currdriverstate) + if (Adapter->LEDInfo.LEDState[uiIndex].LED_On_State & currdriverstate) { - if(Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM) + if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM) { *GPIO_num_tx = Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num; *uiLedTxIndex = uiIndex; @@ -614,21 +612,21 @@ static INT BcmGetGPIOPinInfo(PMINI_ADAPTER Adapter, UCHAR *GPIO_num_tx, UCHAR *G } } } - return STATUS_SUCCESS ; + return STATUS_SUCCESS; } static VOID LEDControlThread(PMINI_ADAPTER Adapter) { UINT uiIndex = 0; UCHAR GPIO_num = 0; - UCHAR uiLedIndex = 0 ; + UCHAR uiLedIndex = 0; UINT uiResetValue = 0; LedEventInfo_t currdriverstate = 0; ulong timeout = 0; INT Status = 0; - UCHAR dummyGPIONum = 0; - UCHAR dummyIndex = 0; + UCHAR dummyGPIONum = 0; + UCHAR dummyIndex = 0; //currdriverstate = Adapter->DriverState; Adapter->LEDInfo.bIdleMode_tx_from_host = FALSE; @@ -637,75 +635,75 @@ static VOID LEDControlThread(PMINI_ADAPTER Adapter) //wait_event(Adapter->LEDInfo.notify_led_event, // currdriverstate!= Adapter->DriverState); - GPIO_num = DISABLE_GPIO_NUM ; + GPIO_num = DISABLE_GPIO_NUM; - while(TRUE) + while (TRUE) { /*Wait till event is triggered*/ - if( (GPIO_num == DISABLE_GPIO_NUM) + if ((GPIO_num == DISABLE_GPIO_NUM) || ((currdriverstate != FW_DOWNLOAD) && (currdriverstate != NORMAL_OPERATION) && (currdriverstate != LOWPOWER_MODE_ENTER)) - || - (currdriverstate == LED_THREAD_INACTIVE) ) + || + (currdriverstate == LED_THREAD_INACTIVE)) { Status = wait_event_interruptible(Adapter->LEDInfo.notify_led_event, currdriverstate != Adapter->DriverState || kthread_should_stop()); } - if(kthread_should_stop() || Adapter->device_removed ) + if (kthread_should_stop() || Adapter->device_removed) { - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Led thread got signal to exit..hence exiting"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Led thread got signal to exit..hence exiting"); Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_DISABLED; - TURN_OFF_LED(1<LEDInfo.bLedInitDone == FALSE) + if (Adapter->LEDInfo.bLedInitDone == FALSE) { LedGpioInit(Adapter); Adapter->LEDInfo.bLedInitDone = TRUE; } - switch(Adapter->DriverState) + switch (Adapter->DriverState) { case DRIVER_INIT: { currdriverstate = DRIVER_INIT;//Adapter->DriverState; BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum, &uiLedIndex, &dummyIndex, currdriverstate); - if(GPIO_num != DISABLE_GPIO_NUM) + if (GPIO_num != DISABLE_GPIO_NUM) { - TURN_ON_LED(1<LEDInfo.bIdle_led_off = FALSE; + Adapter->LEDInfo.bIdle_led_off = FALSE; - BcmGetGPIOPinInfo(Adapter, &GPIO_num_tx, &GPIO_num_rx, &uiLEDTx,&uiLEDRx,currdriverstate); - if((GPIO_num_tx == DISABLE_GPIO_NUM) && (GPIO_num_rx == DISABLE_GPIO_NUM)) + BcmGetGPIOPinInfo(Adapter, &GPIO_num_tx, &GPIO_num_rx, &uiLEDTx, &uiLEDRx, currdriverstate); + if ((GPIO_num_tx == DISABLE_GPIO_NUM) && (GPIO_num_rx == DISABLE_GPIO_NUM)) { - GPIO_num = DISABLE_GPIO_NUM ; + GPIO_num = DISABLE_GPIO_NUM; } else { /*If single LED is selected, use same for both Tx and Rx*/ - if(GPIO_num_tx == DISABLE_GPIO_NUM) + if (GPIO_num_tx == DISABLE_GPIO_NUM) { GPIO_num_tx = GPIO_num_rx; uiLEDTx = uiLEDRx; } - else if(GPIO_num_rx == DISABLE_GPIO_NUM) + else if (GPIO_num_rx == DISABLE_GPIO_NUM) { GPIO_num_rx = GPIO_num_tx; uiLEDRx = uiLEDTx; } /*Blink the LED in proportionate to Tx and Rx transmissions.*/ - LED_Proportional_Blink(Adapter, GPIO_num_tx, uiLEDTx, GPIO_num_rx, uiLEDRx,currdriverstate); + LED_Proportional_Blink(Adapter, GPIO_num_tx, uiLEDTx, GPIO_num_rx, uiLEDRx, currdriverstate); } } break; case LOWPOWER_MODE_ENTER: { - currdriverstate = LOWPOWER_MODE_ENTER; - if( DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING == Adapter->ulPowerSaveMode) + currdriverstate = LOWPOWER_MODE_ENTER; + if (DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING == Adapter->ulPowerSaveMode) { /* Turn OFF all the LED */ uiResetValue = 0; - for(uiIndex =0; uiIndex < NUM_OF_LEDS; uiIndex++) + for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) { - if(Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM) - TURN_OFF_LED((1<LEDInfo.LEDState[uiIndex].GPIO_Num),uiIndex); + if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM) + TURN_OFF_LED((1 << Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num), uiIndex); } } /* Turn off LED And WAKE-UP for Sendinf IDLE mode ACK */ Adapter->LEDInfo.bLedInitDone = FALSE; - Adapter->LEDInfo.bIdle_led_off = TRUE; + Adapter->LEDInfo.bIdle_led_off = TRUE; wake_up(&Adapter->LEDInfo.idleModeSyncEvent); GPIO_num = DISABLE_GPIO_NUM; break; @@ -790,39 +788,39 @@ static VOID LEDControlThread(PMINI_ADAPTER Adapter) { currdriverstate = DRIVER_HALT; GPIO_num = DISABLE_GPIO_NUM; - for(uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) + for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) { - if(Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != + if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM) - TURN_OFF_LED((1<LEDInfo.LEDState[uiIndex].GPIO_Num),uiIndex); + TURN_OFF_LED((1 << Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num), uiIndex); } //Adapter->DriverState = DRIVER_INIT; } break; - case LED_THREAD_INACTIVE : + case LED_THREAD_INACTIVE: { - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"InActivating LED thread..."); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "InActivating LED thread..."); currdriverstate = LED_THREAD_INACTIVE; - Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_RUNNING_INACTIVELY ; - Adapter->LEDInfo.bLedInitDone = FALSE ; + Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_RUNNING_INACTIVELY; + Adapter->LEDInfo.bLedInitDone = FALSE; //disable ALL LED - for(uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) + for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) { - if(Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != + if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM) - TURN_OFF_LED((1<LEDInfo.LEDState[uiIndex].GPIO_Num),uiIndex); + TURN_OFF_LED((1 << Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num), uiIndex); } } break; - case LED_THREAD_ACTIVE : + case LED_THREAD_ACTIVE: { - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"Activating LED thread again..."); - if(Adapter->LinkUpStatus == FALSE) + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Activating LED thread again..."); + if (Adapter->LinkUpStatus == FALSE) Adapter->DriverState = NO_NETWORK_ENTRY; else Adapter->DriverState = NORMAL_OPERATION; - Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_RUNNING_ACTIVELY ; + Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_RUNNING_ACTIVELY; } break; //return; @@ -842,21 +840,21 @@ int InitLedSettings(PMINI_ADAPTER Adapter) /*Initially set BitPolarity to normal polarity. The bit 8 of LED type * is used to change the polarity of the LED.*/ - for(uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) { + for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) { Adapter->LEDInfo.LEDState[uiIndex].BitPolarity = 1; } /*Read the LED settings of CONFIG file and map it to GPIO numbers in EEPROM*/ Status = ReadConfigFileStructure(Adapter, &bEnableThread); - if(STATUS_SUCCESS != Status) + if (STATUS_SUCCESS != Status) { - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"LED Thread: FAILED in ReadConfigFileStructure\n"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: FAILED in ReadConfigFileStructure\n"); return Status; } - if(Adapter->LEDInfo.led_thread_running) + if (Adapter->LEDInfo.led_thread_running) { - if(bEnableThread) + if (bEnableThread) ; else { @@ -867,21 +865,21 @@ int InitLedSettings(PMINI_ADAPTER Adapter) } - else if(bEnableThread) + else if (bEnableThread) { /*Create secondary thread to handle the LEDs*/ init_waitqueue_head(&Adapter->LEDInfo.notify_led_event); init_waitqueue_head(&Adapter->LEDInfo.idleModeSyncEvent); Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_RUNNING_ACTIVELY; - Adapter->LEDInfo.bIdle_led_off = FALSE; + Adapter->LEDInfo.bIdle_led_off = FALSE; Adapter->LEDInfo.led_cntrl_threadid = kthread_run((int (*)(void *)) - LEDControlThread, Adapter, "led_control_thread"); - if(IS_ERR(Adapter->LEDInfo.led_cntrl_threadid)) - { - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Not able to spawn Kernel Thread\n"); + LEDControlThread, Adapter, "led_control_thread"); + if (IS_ERR(Adapter->LEDInfo.led_cntrl_threadid)) + { + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Not able to spawn Kernel Thread\n"); Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_DISABLED; - return PTR_ERR(Adapter->LEDInfo.led_cntrl_threadid); - } + return PTR_ERR(Adapter->LEDInfo.led_cntrl_threadid); + } } return Status; }