From: Jeff Garzik Date: Thu, 14 Dec 2006 22:04:33 +0000 (-0500) Subject: [libata] sata_svw: Disable ATAPI DMA on current boards (errata workaround) X-Git-Tag: MMI-PSA29.97-13-9~45856^2~6 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=c10340aca270abb141154cd93dcf1be0b92143fc;p=GitHub%2FMotorolaMobilityLLC%2Fkernel-slsi.git [libata] sata_svw: Disable ATAPI DMA on current boards (errata workaround) Current Broadcom/Serverworks SATA boards (including Apple K2 SATA) have problems with ATAPI DMA, so it is disabled. ATAPI PIO, ATA PIO, and ATA DMA continue to work just fine. Acked-by: Anantha Subramanyam Signed-off-by: Jeff Garzik --- diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c index db32d15b7fa1..d89c9590b845 100644 --- a/drivers/ata/sata_svw.c +++ b/drivers/ata/sata_svw.c @@ -56,6 +56,8 @@ #define DRV_VERSION "2.0" enum { + K2_FLAG_NO_ATAPI_DMA = (1 << 29), + /* Taskfile registers offsets */ K2_SATA_TF_CMD_OFFSET = 0x00, K2_SATA_TF_DATA_OFFSET = 0x00, @@ -83,11 +85,33 @@ enum { /* Port stride */ K2_SATA_PORT_OFFSET = 0x100, + + board_svw4 = 0, + board_svw8 = 1, +}; + +static const struct k2_board_info { + unsigned int n_ports; + unsigned long port_flags; +} k2_board_info[] = { + /* board_svw4 */ + { 4, K2_FLAG_NO_ATAPI_DMA }, + + /* board_svw8 */ + { 8, K2_FLAG_NO_ATAPI_DMA }, }; static u8 k2_stat_check_status(struct ata_port *ap); +static int k2_sata_check_atapi_dma(struct ata_queued_cmd *qc) +{ + if (qc->ap->flags & K2_FLAG_NO_ATAPI_DMA) + return -1; /* ATAPI DMA not supported */ + + return 0; +} + static u32 k2_sata_scr_read (struct ata_port *ap, unsigned int sc_reg) { if (sc_reg > SCR_CONTROL) @@ -313,6 +337,7 @@ static const struct ata_port_operations k2_sata_ops = { .check_status = k2_stat_check_status, .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, + .check_atapi_dma = k2_sata_check_atapi_dma, .bmdma_setup = k2_bmdma_setup_mmio, .bmdma_start = k2_bmdma_start_mmio, .bmdma_stop = ata_bmdma_stop, @@ -359,6 +384,8 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e struct ata_probe_ent *probe_ent = NULL; unsigned long base; void __iomem *mmio_base; + const struct k2_board_info *board_info = + &k2_board_info[ent->driver_data]; int pci_dev_busy = 0; int rc; int i; @@ -424,7 +451,7 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e probe_ent->sht = &k2_sata_sht; probe_ent->port_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO; + ATA_FLAG_MMIO | board_info->port_flags; probe_ent->port_ops = &k2_sata_ops; probe_ent->n_ports = 4; probe_ent->irq = pdev->irq; @@ -441,7 +468,7 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e /* different controllers have different number of ports - currently 4 or 8 */ /* All ports are on the same function. Multi-function device is no * longer available. This should not be seen in any system. */ - for (i = 0; i < ent->driver_data; i++) + for (i = 0; i < board_info->n_ports; i++) k2_sata_setup_port(&probe_ent->port[i], base + i * K2_SATA_PORT_OFFSET); pci_set_master(pdev); @@ -469,11 +496,11 @@ err_out: * controller * */ static const struct pci_device_id k2_sata_pci_tbl[] = { - { PCI_VDEVICE(SERVERWORKS, 0x0240), 4 }, - { PCI_VDEVICE(SERVERWORKS, 0x0241), 4 }, - { PCI_VDEVICE(SERVERWORKS, 0x0242), 8 }, - { PCI_VDEVICE(SERVERWORKS, 0x024a), 4 }, - { PCI_VDEVICE(SERVERWORKS, 0x024b), 4 }, + { PCI_VDEVICE(SERVERWORKS, 0x0240), board_svw4 }, + { PCI_VDEVICE(SERVERWORKS, 0x0241), board_svw4 }, + { PCI_VDEVICE(SERVERWORKS, 0x0242), board_svw8 }, + { PCI_VDEVICE(SERVERWORKS, 0x024a), board_svw4 }, + { PCI_VDEVICE(SERVERWORKS, 0x024b), board_svw4 }, { } };