From: Michael Chan <mchan@broadcom.com>
Date: Wed, 24 Nov 2010 13:48:55 +0000 (+0000)
Subject: bnx2: Remove config access to non-standard registers
X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=be7ff1afec25f2700ca85e3956a2cb3a7b74acd5;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git

bnx2: Remove config access to non-standard registers

In KVM passthrough mode, the driver may not have config access to
non-standard registers.  The BNX2_PCICFG_MISC_CONFIG config register
access to setup mailbox swapping can be done using MMIO.

Update version to 2.0.20.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---

diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 78f91ef44969..03209a37883e 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -56,8 +56,8 @@
 #include "bnx2_fw.h"
 
 #define DRV_MODULE_NAME		"bnx2"
-#define DRV_MODULE_VERSION	"2.0.18"
-#define DRV_MODULE_RELDATE	"Oct 7, 2010"
+#define DRV_MODULE_VERSION	"2.0.20"
+#define DRV_MODULE_RELDATE	"Nov 24, 2010"
 #define FW_MIPS_FILE_06		"bnx2/bnx2-mips-06-6.0.15.fw"
 #define FW_RV2P_FILE_06		"bnx2/bnx2-rv2p-06-6.0.15.fw"
 #define FW_MIPS_FILE_09		"bnx2/bnx2-mips-09-6.0.17.fw"
@@ -4683,7 +4683,7 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code)
 		val = BNX2_PCICFG_MISC_CONFIG_REG_WINDOW_ENA |
 		      BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP;
 
-		pci_write_config_dword(bp->pdev, BNX2_PCICFG_MISC_CONFIG, val);
+		REG_WR(bp, BNX2_PCICFG_MISC_CONFIG, val);
 
 	} else {
 		val = BNX2_PCICFG_MISC_CONFIG_CORE_RST_REQ |
@@ -7924,15 +7924,15 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
 		goto err_out_release;
 	}
 
+	bnx2_set_power_state(bp, PCI_D0);
+
 	/* Configure byte swap and enable write to the reg_window registers.
 	 * Rely on CPU to do target byte swapping on big endian systems
 	 * The chip's target access swapping will not swap all accesses
 	 */
-	pci_write_config_dword(bp->pdev, BNX2_PCICFG_MISC_CONFIG,
-			       BNX2_PCICFG_MISC_CONFIG_REG_WINDOW_ENA |
-			       BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP);
-
-	bnx2_set_power_state(bp, PCI_D0);
+	REG_WR(bp, BNX2_PCICFG_MISC_CONFIG,
+		   BNX2_PCICFG_MISC_CONFIG_REG_WINDOW_ENA |
+		   BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP);
 
 	bp->chip_id = REG_RD(bp, BNX2_MISC_ID);