From: Linus Walleij Date: Sun, 4 Jun 2017 08:50:08 +0000 (+0200) Subject: ata: Add driver for Faraday Technology FTIDE010 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=be4e456ed3a5918f4e75f532837bb19128a690c9;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git ata: Add driver for Faraday Technology FTIDE010 This adds a driver for the Faraday Technology FTIDE010 PATA IP block. When used with the Storlink/Storm/Cortina Systems Gemini SoC, the PATA interface is accompanied by a PATA<->SATA bridge, so while the device appear as a PATA controller, it attaches physically to SATA disks, and also has a designated memory area with registers to set up the bridge. The Gemini SATA bridge is separated into its own driver file to make things modular and make it possible to reuse the PATA driver as stand-alone on other systems than the Gemini. dmesg excerpt from the D-Link DIR-685 storage router: gemini-sata-bridge 46000000.sata: SATA ID 00000e00, PHY ID: 01000100 gemini-sata-bridge 46000000.sata: set up the Gemini IDE/SATA nexus ftide010 63000000.ata: set up Gemini PATA0 ftide010 63000000.ata: device ID 00000500, irq 26, io base 0x63000000 ftide010 63000000.ata: SATA0 (master) start gemini-sata-bridge 46000000.sata: SATA0 PHY ready scsi host0: pata-ftide010 ata1: PATA max UDMA/133 irq 26 ata1.00: ATA-8: INTEL SSDSA2CW120G3, 4PC10302, max UDMA/133 ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2CW12 0302 PQ: 0 ANSI: 5 ata1.00: Enabling discard_zeroes_data sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata1.00: Enabling discard_zeroes_data ata1.00: Enabling discard_zeroes_data sd 0:0:0:0: [sda] Attached SCSI disk After this I can flawlessly mount and read/write copy etc files from /dev/sda[n]. Cc: John Feng-Hsin Chiang Cc: Greentime Hu Acked-by: Hans Ulli Kroll Signed-off-by: Linus Walleij Acked-by: Bartlomiej Zolnierkiewicz Signed-off-by: Tejun Heo --- diff --git a/MAINTAINERS b/MAINTAINERS index f7d568b8f133..96753be12026 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7531,6 +7531,15 @@ S: Maintained F: drivers/ata/pata_*.c F: drivers/ata/ata_generic.c +LIBATA PATA FARADAY FTIDE010 AND GEMINI SATA BRIDGE DRIVERS +M: Linus Walleij +L: linux-ide@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git +S: Maintained +F: drivers/ata/pata_ftide010.c +F: drivers/ata/sata_gemini.c +F: drivers/ata/sata_gemini.h + LIBATA SATA AHCI PLATFORM devices support M: Hans de Goede M: Tejun Heo diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index de3eaf051697..948fc86980a1 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -213,6 +213,16 @@ config SATA_FSL If unsure, say N. +config SATA_GEMINI + tristate "Gemini SATA bridge support" + depends on PATA_FTIDE010 + default ARCH_GEMINI + help + This enabled support for the FTIDE010 to SATA bridge + found in Cortina Systems Gemini platform. + + If unsure, say N. + config SATA_AHCI_SEATTLE tristate "AMD Seattle 6.0Gbps AHCI SATA host controller support" depends on ARCH_SEATTLE @@ -599,6 +609,17 @@ config PATA_EP93XX If unsure, say N. +config PATA_FTIDE010 + tristate "Faraday Technology FTIDE010 PATA support" + depends on OF + depends on ARM + default ARCH_GEMINI + help + This option enables support for the Faraday FTIDE010 + PATA controller found in the Cortina Gemini SoCs. + + If unsure, say N. + config PATA_HPT366 tristate "HPT 366/368 PATA support" depends on PCI diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index cd931a5eba92..a26ef5a93919 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_SATA_ACARD_AHCI) += acard-ahci.o libahci.o obj-$(CONFIG_SATA_AHCI_SEATTLE) += ahci_seattle.o libahci.o libahci_platform.o obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o libahci_platform.o obj-$(CONFIG_SATA_FSL) += sata_fsl.o +obj-$(CONFIG_SATA_GEMINI) += sata_gemini.o obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o obj-$(CONFIG_SATA_SIL24) += sata_sil24.o obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o @@ -60,6 +61,7 @@ obj-$(CONFIG_PATA_CS5536) += pata_cs5536.o obj-$(CONFIG_PATA_CYPRESS) += pata_cypress.o obj-$(CONFIG_PATA_EFAR) += pata_efar.o obj-$(CONFIG_PATA_EP93XX) += pata_ep93xx.o +obj-$(CONFIG_PATA_FTIDE010) += pata_ftide010.o obj-$(CONFIG_PATA_HPT366) += pata_hpt366.o obj-$(CONFIG_PATA_HPT37X) += pata_hpt37x.o obj-$(CONFIG_PATA_HPT3X2N) += pata_hpt3x2n.o diff --git a/drivers/ata/pata_ftide010.c b/drivers/ata/pata_ftide010.c new file mode 100644 index 000000000000..7b7e417ba8ba --- /dev/null +++ b/drivers/ata/pata_ftide010.c @@ -0,0 +1,567 @@ +/* + * Faraday Technology FTIDE010 driver + * Copyright (C) 2017 Linus Walleij + * + * Includes portions of the SL2312/SL3516/Gemini PATA driver + * Copyright (C) 2003 StorLine, Inc + * Copyright (C) 2009 Janos Laube + * Copyright (C) 2010 Frederic Pecourt + * Copyright (C) 2011 Tobias Waldvogel + */ + +#include +#include +#include +#include +#include +#include +#include +#include "sata_gemini.h" + +#define DRV_NAME "pata_ftide010" + +/** + * struct ftide010 - state container for the Faraday FTIDE010 + * @dev: pointer back to the device representing this controller + * @base: remapped I/O space address + * @pclk: peripheral clock for the IDE block + * @host: pointer to the ATA host for this device + * @master_cbl: master cable type + * @slave_cbl: slave cable type + * @sg: Gemini SATA bridge pointer, if running on the Gemini + * @master_to_sata0: Gemini SATA bridge: the ATA master is connected + * to the SATA0 bridge + * @slave_to_sata0: Gemini SATA bridge: the ATA slave is connected + * to the SATA0 bridge + * @master_to_sata1: Gemini SATA bridge: the ATA master is connected + * to the SATA1 bridge + * @slave_to_sata1: Gemini SATA bridge: the ATA slave is connected + * to the SATA1 bridge + */ +struct ftide010 { + struct device *dev; + void __iomem *base; + struct clk *pclk; + struct ata_host *host; + unsigned int master_cbl; + unsigned int slave_cbl; + /* Gemini-specific properties */ + struct sata_gemini *sg; + bool master_to_sata0; + bool slave_to_sata0; + bool master_to_sata1; + bool slave_to_sata1; +}; + +#define FTIDE010_DMA_REG 0x00 +#define FTIDE010_DMA_STATUS 0x02 +#define FTIDE010_IDE_BMDTPR 0x04 +#define FTIDE010_IDE_DEVICE_ID 0x08 +#define FTIDE010_PIO_TIMING 0x10 +#define FTIDE010_MWDMA_TIMING 0x11 +#define FTIDE010_UDMA_TIMING0 0x12 /* Master */ +#define FTIDE010_UDMA_TIMING1 0x13 /* Slave */ +#define FTIDE010_CLK_MOD 0x14 +/* These registers are mapped directly to the IDE registers */ +#define FTIDE010_CMD_DATA 0x20 +#define FTIDE010_ERROR_FEATURES 0x21 +#define FTIDE010_NSECT 0x22 +#define FTIDE010_LBAL 0x23 +#define FTIDE010_LBAM 0x24 +#define FTIDE010_LBAH 0x25 +#define FTIDE010_DEVICE 0x26 +#define FTIDE010_STATUS_COMMAND 0x27 +#define FTIDE010_ALTSTAT_CTRL 0x36 + +/* Set this bit for UDMA mode 5 and 6 */ +#define FTIDE010_UDMA_TIMING_MODE_56 BIT(7) + +/* 0 = 50 MHz, 1 = 66 MHz */ +#define FTIDE010_CLK_MOD_DEV0_CLK_SEL BIT(0) +#define FTIDE010_CLK_MOD_DEV1_CLK_SEL BIT(1) +/* Enable UDMA on a device */ +#define FTIDE010_CLK_MOD_DEV0_UDMA_EN BIT(4) +#define FTIDE010_CLK_MOD_DEV1_UDMA_EN BIT(5) + +static struct scsi_host_template pata_ftide010_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +/* + * Bus timings + * + * The unit of the below required timings is two clock periods of the ATA + * reference clock which is 30 nanoseconds per unit at 66MHz and 20 + * nanoseconds per unit at 50 MHz. The PIO timings assume 33MHz speed for + * PIO. + * + * pio_active_time: array of 5 elements for T2 timing for Mode 0, + * 1, 2, 3 and 4. Range 0..15. + * pio_recovery_time: array of 5 elements for T2l timing for Mode 0, + * 1, 2, 3 and 4. Range 0..15. + * mdma_50_active_time: array of 4 elements for Td timing for multi + * word DMA, Mode 0, 1, and 2 at 50 MHz. Range 0..15. + * mdma_50_recovery_time: array of 4 elements for Tk timing for + * multi word DMA, Mode 0, 1 and 2 at 50 MHz. Range 0..15. + * mdma_66_active_time: array of 4 elements for Td timing for multi + * word DMA, Mode 0, 1 and 2 at 66 MHz. Range 0..15. + * mdma_66_recovery_time: array of 4 elements for Tk timing for + * multi word DMA, Mode 0, 1 and 2 at 66 MHz. Range 0..15. + * udma_50_setup_time: array of 4 elements for Tvds timing for ultra + * DMA, Mode 0, 1, 2, 3, 4 and 5 at 50 MHz. Range 0..7. + * udma_50_hold_time: array of 4 elements for Tdvh timing for + * multi word DMA, Mode 0, 1, 2, 3, 4 and 5 at 50 MHz, Range 0..7. + * udma_66_setup_time: array of 4 elements for Tvds timing for multi + * word DMA, Mode 0, 1, 2, 3, 4, 5 and 6 at 66 MHz. Range 0..7. + * udma_66_hold_time: array of 4 elements for Tdvh timing for + * multi word DMA, Mode 0, 1, 2, 3, 4, 5 and 6 at 66 MHz. Range 0..7. + */ +static const u8 pio_active_time[5] = {10, 10, 10, 3, 3}; +static const u8 pio_recovery_time[5] = {10, 3, 1, 3, 1}; +static const u8 mwdma_50_active_time[3] = {6, 2, 2}; +static const u8 mwdma_50_recovery_time[3] = {6, 2, 1}; +static const u8 mwdma_66_active_time[3] = {8, 3, 3}; +static const u8 mwdma_66_recovery_time[3] = {8, 2, 1}; +static const u8 udma_50_setup_time[6] = {3, 3, 2, 2, 1, 1}; +static const u8 udma_50_hold_time[6] = {3, 1, 1, 1, 1, 1}; +static const u8 udma_66_setup_time[7] = {4, 4, 3, 2, }; +static const u8 udma_66_hold_time[7] = {}; + +/* + * We set 66 MHz for all MWDMA modes + */ +static const bool set_mdma_66_mhz[] = { true, true, true, true }; + +/* + * We set 66 MHz for UDMA modes 3, 4 and 6 and no others + */ +static const bool set_udma_66_mhz[] = { false, false, false, true, true, false, true }; + +static void ftide010_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + struct ftide010 *ftide = ap->host->private_data; + u8 speed = adev->dma_mode; + u8 devno = adev->devno & 1; + u8 udma_en_mask; + u8 f66m_en_mask; + u8 clkreg; + u8 timreg; + u8 i; + + /* Target device 0 (master) or 1 (slave) */ + if (!devno) { + udma_en_mask = FTIDE010_CLK_MOD_DEV0_UDMA_EN; + f66m_en_mask = FTIDE010_CLK_MOD_DEV0_CLK_SEL; + } else { + udma_en_mask = FTIDE010_CLK_MOD_DEV1_UDMA_EN; + f66m_en_mask = FTIDE010_CLK_MOD_DEV1_CLK_SEL; + } + + clkreg = readb(ftide->base + FTIDE010_CLK_MOD); + clkreg &= ~udma_en_mask; + clkreg &= ~f66m_en_mask; + + if (speed & XFER_UDMA_0) { + i = speed & ~XFER_UDMA_0; + dev_dbg(ftide->dev, "set UDMA mode %02x, index %d\n", + speed, i); + + clkreg |= udma_en_mask; + if (set_udma_66_mhz[i]) { + clkreg |= f66m_en_mask; + timreg = udma_66_setup_time[i] << 4 | + udma_66_hold_time[i]; + } else { + timreg = udma_50_setup_time[i] << 4 | + udma_50_hold_time[i]; + } + + /* A special bit needs to be set for modes 5 and 6 */ + if (i >= 5) + timreg |= FTIDE010_UDMA_TIMING_MODE_56; + + dev_dbg(ftide->dev, "UDMA write clkreg = %02x, timreg = %02x\n", + clkreg, timreg); + + writeb(clkreg, ftide->base + FTIDE010_CLK_MOD); + writeb(timreg, ftide->base + FTIDE010_UDMA_TIMING0 + devno); + } else { + i = speed & ~XFER_MW_DMA_0; + dev_dbg(ftide->dev, "set MWDMA mode %02x, index %d\n", + speed, i); + + if (set_mdma_66_mhz[i]) { + clkreg |= f66m_en_mask; + timreg = mwdma_66_active_time[i] << 4 | + mwdma_66_recovery_time[i]; + } else { + timreg = mwdma_50_active_time[i] << 4 | + mwdma_50_recovery_time[i]; + } + dev_dbg(ftide->dev, + "MWDMA write clkreg = %02x, timreg = %02x\n", + clkreg, timreg); + /* This will affect all devices */ + writeb(clkreg, ftide->base + FTIDE010_CLK_MOD); + writeb(timreg, ftide->base + FTIDE010_MWDMA_TIMING); + } + + /* + * Store the current device (master or slave) in ap->private_data + * so that .qc_issue() can detect if this changes and reprogram + * the DMA settings. + */ + ap->private_data = adev; + + return; +} + +static void ftide010_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct ftide010 *ftide = ap->host->private_data; + u8 pio = adev->pio_mode - XFER_PIO_0; + + dev_dbg(ftide->dev, "set PIO mode %02x, index %d\n", + adev->pio_mode, pio); + writeb(pio_active_time[pio] << 4 | pio_recovery_time[pio], + ftide->base + FTIDE010_PIO_TIMING); +} + +/* + * We implement our own qc_issue() callback since we may need to set up + * the timings differently for master and slave transfers: the CLK_MOD_REG + * and MWDMA_TIMING_REG is shared between master and slave, so reprogramming + * this may be necessary. + */ +static unsigned int ftide010_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + + /* + * If the device changed, i.e. slave->master, master->slave, + * then set up the DMA mode again so we are sure the timings + * are correct. + */ + if (adev != ap->private_data && ata_dma_enabled(adev)) + ftide010_set_dmamode(ap, adev); + + return ata_bmdma_qc_issue(qc); +} + +static struct ata_port_operations pata_ftide010_port_ops = { + .inherits = &ata_bmdma_port_ops, + .set_dmamode = ftide010_set_dmamode, + .set_piomode = ftide010_set_piomode, + .qc_issue = ftide010_qc_issue, +}; + +static struct ata_port_info ftide010_port_info[] = { + { + .flags = ATA_FLAG_SLAVE_POSS, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .pio_mask = ATA_PIO4, + .port_ops = &pata_ftide010_port_ops, + }, +}; + +#if IS_ENABLED(CONFIG_SATA_GEMINI) + +static int pata_ftide010_gemini_port_start(struct ata_port *ap) +{ + struct ftide010 *ftide = ap->host->private_data; + struct device *dev = ftide->dev; + struct sata_gemini *sg = ftide->sg; + int bridges = 0; + int ret; + + ret = ata_bmdma_port_start(ap); + if (ret) + return ret; + + if (ftide->master_to_sata0) { + dev_info(dev, "SATA0 (master) start\n"); + ret = gemini_sata_start_bridge(sg, 0); + if (!ret) + bridges++; + } + if (ftide->master_to_sata1) { + dev_info(dev, "SATA1 (master) start\n"); + ret = gemini_sata_start_bridge(sg, 1); + if (!ret) + bridges++; + } + /* Avoid double-starting */ + if (ftide->slave_to_sata0 && !ftide->master_to_sata0) { + dev_info(dev, "SATA0 (slave) start\n"); + ret = gemini_sata_start_bridge(sg, 0); + if (!ret) + bridges++; + } + /* Avoid double-starting */ + if (ftide->slave_to_sata1 && !ftide->master_to_sata1) { + dev_info(dev, "SATA1 (slave) start\n"); + ret = gemini_sata_start_bridge(sg, 1); + if (!ret) + bridges++; + } + + dev_info(dev, "brought %d bridges online\n", bridges); + return (bridges > 0) ? 0 : -EINVAL; // -ENODEV; +} + +static void pata_ftide010_gemini_port_stop(struct ata_port *ap) +{ + struct ftide010 *ftide = ap->host->private_data; + struct device *dev = ftide->dev; + struct sata_gemini *sg = ftide->sg; + + if (ftide->master_to_sata0) { + dev_info(dev, "SATA0 (master) stop\n"); + gemini_sata_stop_bridge(sg, 0); + } + if (ftide->master_to_sata1) { + dev_info(dev, "SATA1 (master) stop\n"); + gemini_sata_stop_bridge(sg, 1); + } + /* Avoid double-stopping */ + if (ftide->slave_to_sata0 && !ftide->master_to_sata0) { + dev_info(dev, "SATA0 (slave) stop\n"); + gemini_sata_stop_bridge(sg, 0); + } + /* Avoid double-stopping */ + if (ftide->slave_to_sata1 && !ftide->master_to_sata1) { + dev_info(dev, "SATA1 (slave) stop\n"); + gemini_sata_stop_bridge(sg, 1); + } +} + +static int pata_ftide010_gemini_cable_detect(struct ata_port *ap) +{ + struct ftide010 *ftide = ap->host->private_data; + + /* + * Return the master cable, I have no clue how to return a different + * cable for the slave than for the master. + */ + return ftide->master_cbl; +} + +static int pata_ftide010_gemini_init(struct ftide010 *ftide, + bool is_ata1) +{ + struct device *dev = ftide->dev; + struct sata_gemini *sg; + enum gemini_muxmode muxmode; + + /* Look up SATA bridge */ + sg = gemini_sata_bridge_get(); + if (IS_ERR(sg)) + return PTR_ERR(sg); + ftide->sg = sg; + + muxmode = gemini_sata_get_muxmode(sg); + + /* Special ops */ + pata_ftide010_port_ops.port_start = + pata_ftide010_gemini_port_start; + pata_ftide010_port_ops.port_stop = + pata_ftide010_gemini_port_stop; + pata_ftide010_port_ops.cable_detect = + pata_ftide010_gemini_cable_detect; + + /* Flag port as SATA-capable */ + if (gemini_sata_bridge_enabled(sg, is_ata1)) + ftide010_port_info[0].flags |= ATA_FLAG_SATA; + + /* + * We assume that a simple 40-wire cable is used in the PATA mode. + * if you're adding a system using the PATA interface, make sure + * the right cable is set up here, it might be necessary to use + * special hardware detection or encode the cable type in the device + * tree with special properties. + */ + if (!is_ata1) { + switch (muxmode) { + case GEMINI_MUXMODE_0: + ftide->master_cbl = ATA_CBL_SATA; + ftide->slave_cbl = ATA_CBL_PATA40; + ftide->master_to_sata0 = true; + break; + case GEMINI_MUXMODE_1: + ftide->master_cbl = ATA_CBL_SATA; + ftide->slave_cbl = ATA_CBL_NONE; + ftide->master_to_sata0 = true; + break; + case GEMINI_MUXMODE_2: + ftide->master_cbl = ATA_CBL_PATA40; + ftide->slave_cbl = ATA_CBL_PATA40; + break; + case GEMINI_MUXMODE_3: + ftide->master_cbl = ATA_CBL_SATA; + ftide->slave_cbl = ATA_CBL_SATA; + ftide->master_to_sata0 = true; + ftide->slave_to_sata1 = true; + break; + } + } else { + switch (muxmode) { + case GEMINI_MUXMODE_0: + ftide->master_cbl = ATA_CBL_SATA; + ftide->slave_cbl = ATA_CBL_NONE; + ftide->master_to_sata1 = true; + break; + case GEMINI_MUXMODE_1: + ftide->master_cbl = ATA_CBL_SATA; + ftide->slave_cbl = ATA_CBL_PATA40; + ftide->master_to_sata1 = true; + break; + case GEMINI_MUXMODE_2: + ftide->master_cbl = ATA_CBL_SATA; + ftide->slave_cbl = ATA_CBL_SATA; + ftide->slave_to_sata0 = true; + ftide->master_to_sata1 = true; + break; + case GEMINI_MUXMODE_3: + ftide->master_cbl = ATA_CBL_PATA40; + ftide->slave_cbl = ATA_CBL_PATA40; + break; + } + } + dev_info(dev, "set up Gemini PATA%d\n", is_ata1); + + return 0; +} +#else +static int pata_ftide010_gemini_init(struct ftide010 *ftide, + bool is_ata1) +{ + return -ENOTSUPP; +} +#endif + + +static int pata_ftide010_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + const struct ata_port_info pi = ftide010_port_info[0]; + const struct ata_port_info *ppi[] = { &pi, NULL }; + struct ftide010 *ftide; + struct resource *res; + int irq; + int ret; + int i; + + ftide = devm_kzalloc(dev, sizeof(*ftide), GFP_KERNEL); + if (!ftide) + return -ENOMEM; + ftide->dev = dev; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + ftide->base = devm_ioremap_resource(dev, res); + if (IS_ERR(ftide->base)) + return PTR_ERR(ftide->base); + + ftide->pclk = devm_clk_get(dev, "PCLK"); + if (!IS_ERR(ftide->pclk)) { + ret = clk_prepare_enable(ftide->pclk); + if (ret) { + dev_err(dev, "failed to enable PCLK\n"); + return ret; + } + } + + /* Some special Cortina Gemini init, if needed */ + if (of_device_is_compatible(np, "cortina,gemini-pata")) { + /* + * We need to know which instance is probing (the + * Gemini has two instances of FTIDE010) and we do + * this simply by looking at the physical base + * address, which is 0x63400000 for ATA1, else we + * are ATA0. This will also set up the cable types. + */ + ret = pata_ftide010_gemini_init(ftide, + (res->start == 0x63400000)); + if (ret) + goto err_dis_clk; + } else { + /* Else assume we are connected using PATA40 */ + ftide->master_cbl = ATA_CBL_PATA40; + ftide->slave_cbl = ATA_CBL_PATA40; + } + + ftide->host = ata_host_alloc_pinfo(dev, ppi, 1); + if (!ftide->host) { + ret = -ENOMEM; + goto err_dis_clk; + } + ftide->host->private_data = ftide; + + for (i = 0; i < ftide->host->n_ports; i++) { + struct ata_port *ap = ftide->host->ports[i]; + struct ata_ioports *ioaddr = &ap->ioaddr; + + ioaddr->bmdma_addr = ftide->base + FTIDE010_DMA_REG; + ioaddr->cmd_addr = ftide->base + FTIDE010_CMD_DATA; + ioaddr->ctl_addr = ftide->base + FTIDE010_ALTSTAT_CTRL; + ioaddr->altstatus_addr = ftide->base + FTIDE010_ALTSTAT_CTRL; + ata_sff_std_ports(ioaddr); + } + + dev_info(dev, "device ID %08x, irq %d, io base 0x%08x\n", + readl(ftide->base + FTIDE010_IDE_DEVICE_ID), irq, res->start); + + ret = ata_host_activate(ftide->host, irq, ata_bmdma_interrupt, + 0, &pata_ftide010_sht); + if (ret) + goto err_dis_clk; + + return 0; + +err_dis_clk: + if (!IS_ERR(ftide->pclk)) + clk_disable_unprepare(ftide->pclk); + return ret; +} + +static int pata_ftide010_remove(struct platform_device *pdev) +{ + struct ata_host *host = platform_get_drvdata(pdev); + struct ftide010 *ftide = host->private_data; + + ata_host_detach(ftide->host); + if (!IS_ERR(ftide->pclk)) + clk_disable_unprepare(ftide->pclk); + + return 0; +} + +static const struct of_device_id pata_ftide010_of_match[] = { + { + .compatible = "faraday,ftide010", + }, + {}, +}; + +static struct platform_driver pata_ftide010_driver = { + .driver = { + .name = DRV_NAME, + .of_match_table = of_match_ptr(pata_ftide010_of_match), + }, + .probe = pata_ftide010_probe, + .remove = pata_ftide010_remove, +}; +module_platform_driver(pata_ftide010_driver); + +MODULE_AUTHOR("Linus Walleij "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/ata/sata_gemini.c b/drivers/ata/sata_gemini.c new file mode 100644 index 000000000000..8c704523bae7 --- /dev/null +++ b/drivers/ata/sata_gemini.c @@ -0,0 +1,438 @@ +/* + * Cortina Systems Gemini SATA bridge add-on to Faraday FTIDE010 + * Copyright (C) 2017 Linus Walleij + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "sata_gemini.h" + +#define DRV_NAME "gemini_sata_bridge" + +/** + * struct sata_gemini - a state container for a Gemini SATA bridge + * @dev: the containing device + * @base: remapped I/O memory base + * @muxmode: the current muxing mode + * @ide_pins: if the device is using the plain IDE interface pins + * @sata_bridge: if the device enables the SATA bridge + * @sata0_reset: SATA0 reset handler + * @sata1_reset: SATA1 reset handler + * @sata0_pclk: SATA0 PCLK handler + * @sata1_pclk: SATA1 PCLK handler + */ +struct sata_gemini { + struct device *dev; + void __iomem *base; + enum gemini_muxmode muxmode; + bool ide_pins; + bool sata_bridge; + struct reset_control *sata0_reset; + struct reset_control *sata1_reset; + struct clk *sata0_pclk; + struct clk *sata1_pclk; +}; + +/* Global IDE PAD Skew Control Register */ +#define GEMINI_GLOBAL_IDE_SKEW_CTRL 0x18 +#define GEMINI_IDE1_HOST_STROBE_DELAY_SHIFT 28 +#define GEMINI_IDE1_DEVICE_STROBE_DELAY_SHIFT 24 +#define GEMINI_IDE1_OUTPUT_IO_SKEW_SHIFT 20 +#define GEMINI_IDE1_INPUT_IO_SKEW_SHIFT 16 +#define GEMINI_IDE0_HOST_STROBE_DELAY_SHIFT 12 +#define GEMINI_IDE0_DEVICE_STROBE_DELAY_SHIFT 8 +#define GEMINI_IDE0_OUTPUT_IO_SKEW_SHIFT 4 +#define GEMINI_IDE0_INPUT_IO_SKEW_SHIFT 0 + +/* Miscellaneous Control Register */ +#define GEMINI_GLOBAL_MISC_CTRL 0x30 +/* + * Values of IDE IOMUX bits in the misc control register + * + * Bits 26:24 are "IDE IO Select", which decides what SATA + * adapters are connected to which of the two IDE/ATA + * controllers in the Gemini. We can connect the two IDE blocks + * to one SATA adapter each, both acting as master, or one IDE + * blocks to two SATA adapters so the IDE block can act in a + * master/slave configuration. + * + * We also bring out different blocks on the actual IDE + * pins (not SATA pins) if (and only if) these are muxed in. + * + * 111-100 - Reserved + * Mode 0: 000 - ata0 master <-> sata0 + * ata1 master <-> sata1 + * ata0 slave interface brought out on IDE pads + * Mode 1: 001 - ata0 master <-> sata0 + * ata1 master <-> sata1 + * ata1 slave interface brought out on IDE pads + * Mode 2: 010 - ata1 master <-> sata1 + * ata1 slave <-> sata0 + * ata0 master and slave interfaces brought out + * on IDE pads + * Mode 3: 011 - ata0 master <-> sata0 + * ata1 slave <-> sata1 + * ata1 master and slave interfaces brought out + * on IDE pads + */ +#define GEMINI_IDE_IOMUX_MASK (7 << 24) +#define GEMINI_IDE_IOMUX_MODE0 (0 << 24) +#define GEMINI_IDE_IOMUX_MODE1 (1 << 24) +#define GEMINI_IDE_IOMUX_MODE2 (2 << 24) +#define GEMINI_IDE_IOMUX_MODE3 (3 << 24) +#define GEMINI_IDE_IOMUX_SHIFT (24) +#define GEMINI_IDE_PADS_ENABLE BIT(4) +#define GEMINI_PFLASH_PADS_DISABLE BIT(1) + +/* + * Registers directly controlling the PATA<->SATA adapters + */ +#define GEMINI_SATA_ID 0x00 +#define GEMINI_SATA_PHY_ID 0x04 +#define GEMINI_SATA0_STATUS 0x08 +#define GEMINI_SATA1_STATUS 0x0c +#define GEMINI_SATA0_CTRL 0x18 +#define GEMINI_SATA1_CTRL 0x1c + +#define GEMINI_SATA_STATUS_BIST_DONE BIT(5) +#define GEMINI_SATA_STATUS_BIST_OK BIT(4) +#define GEMINI_SATA_STATUS_PHY_READY BIT(0) + +#define GEMINI_SATA_CTRL_PHY_BIST_EN BIT(14) +#define GEMINI_SATA_CTRL_PHY_FORCE_IDLE BIT(13) +#define GEMINI_SATA_CTRL_PHY_FORCE_READY BIT(12) +#define GEMINI_SATA_CTRL_PHY_AFE_LOOP_EN BIT(10) +#define GEMINI_SATA_CTRL_PHY_DIG_LOOP_EN BIT(9) +#define GEMINI_SATA_CTRL_HOTPLUG_DETECT_EN BIT(4) +#define GEMINI_SATA_CTRL_ATAPI_EN BIT(3) +#define GEMINI_SATA_CTRL_BUS_WITH_20 BIT(2) +#define GEMINI_SATA_CTRL_SLAVE_EN BIT(1) +#define GEMINI_SATA_CTRL_EN BIT(0) + +/* + * There is only ever one instance of this bridge on a system, + * so create a singleton so that the FTIDE010 instances can grab + * a reference to it. + */ +static struct sata_gemini *sg_singleton; + +struct sata_gemini *gemini_sata_bridge_get(void) +{ + if (sg_singleton) + return sg_singleton; + return ERR_PTR(-EPROBE_DEFER); +} +EXPORT_SYMBOL(gemini_sata_bridge_get); + +bool gemini_sata_bridge_enabled(struct sata_gemini *sg, bool is_ata1) +{ + if (!sg->sata_bridge) + return false; + /* + * In muxmode 2 and 3 one of the ATA controllers is + * actually not connected to any SATA bridge. + */ + if ((sg->muxmode == GEMINI_MUXMODE_2) && + !is_ata1) + return false; + if ((sg->muxmode == GEMINI_MUXMODE_3) && + is_ata1) + return false; + + return true; +} +EXPORT_SYMBOL(gemini_sata_bridge_enabled); + +enum gemini_muxmode gemini_sata_get_muxmode(struct sata_gemini *sg) +{ + return sg->muxmode; +} +EXPORT_SYMBOL(gemini_sata_get_muxmode); + +static int gemini_sata_setup_bridge(struct sata_gemini *sg, + unsigned int bridge) +{ + unsigned long timeout = jiffies + (HZ * 1); + bool bridge_online; + u32 val; + + if (bridge == 0) { + val = GEMINI_SATA_CTRL_HOTPLUG_DETECT_EN | GEMINI_SATA_CTRL_EN; + /* SATA0 slave mode is only used in muxmode 2 */ + if (sg->muxmode == GEMINI_MUXMODE_2) + val |= GEMINI_SATA_CTRL_SLAVE_EN; + writel(val, sg->base + GEMINI_SATA0_CTRL); + } else { + val = GEMINI_SATA_CTRL_HOTPLUG_DETECT_EN | GEMINI_SATA_CTRL_EN; + /* SATA1 slave mode is only used in muxmode 3 */ + if (sg->muxmode == GEMINI_MUXMODE_3) + val |= GEMINI_SATA_CTRL_SLAVE_EN; + writel(val, sg->base + GEMINI_SATA1_CTRL); + } + + /* Vendor code waits 10 ms here */ + msleep(10); + + /* Wait for PHY to become ready */ + do { + msleep(100); + + if (bridge == 0) + val = readl(sg->base + GEMINI_SATA0_STATUS); + else + val = readl(sg->base + GEMINI_SATA1_STATUS); + if (val & GEMINI_SATA_STATUS_PHY_READY) + break; + } while (time_before(jiffies, timeout)); + + bridge_online = !!(val & GEMINI_SATA_STATUS_PHY_READY); + + dev_info(sg->dev, "SATA%d PHY %s\n", bridge, + bridge_online ? "ready" : "not ready"); + + return bridge_online ? 0: -ENODEV; +} + +int gemini_sata_start_bridge(struct sata_gemini *sg, unsigned int bridge) +{ + struct clk *pclk; + int ret; + + if (bridge == 0) + pclk = sg->sata0_pclk; + else + pclk = sg->sata1_pclk; + clk_enable(pclk); + msleep(10); + + /* Do not keep clocking a bridge that is not online */ + ret = gemini_sata_setup_bridge(sg, bridge); + if (ret) + clk_disable(pclk); + + return ret; +} +EXPORT_SYMBOL(gemini_sata_start_bridge); + +void gemini_sata_stop_bridge(struct sata_gemini *sg, unsigned int bridge) +{ + if (bridge == 0) + clk_disable(sg->sata0_pclk); + else if (bridge == 1) + clk_disable(sg->sata1_pclk); +} +EXPORT_SYMBOL(gemini_sata_stop_bridge); + +int gemini_sata_reset_bridge(struct sata_gemini *sg, + unsigned int bridge) +{ + if (bridge == 0) + reset_control_reset(sg->sata0_reset); + else + reset_control_reset(sg->sata1_reset); + msleep(10); + return gemini_sata_setup_bridge(sg, bridge); +} +EXPORT_SYMBOL(gemini_sata_reset_bridge); + +static int gemini_sata_bridge_init(struct sata_gemini *sg) +{ + struct device *dev = sg->dev; + u32 sata_id, sata_phy_id; + int ret; + + sg->sata0_pclk = devm_clk_get(dev, "SATA0_PCLK"); + if (IS_ERR(sg->sata0_pclk)) { + dev_err(dev, "no SATA0 PCLK"); + return -ENODEV; + } + sg->sata1_pclk = devm_clk_get(dev, "SATA1_PCLK"); + if (IS_ERR(sg->sata1_pclk)) { + dev_err(dev, "no SATA1 PCLK"); + return -ENODEV; + } + + ret = clk_prepare_enable(sg->sata0_pclk); + if (ret) { + pr_err("failed to enable SATA0 PCLK\n"); + return ret; + } + ret = clk_prepare_enable(sg->sata1_pclk); + if (ret) { + pr_err("failed to enable SATA1 PCLK\n"); + clk_disable_unprepare(sg->sata0_pclk); + return ret; + } + + sg->sata0_reset = devm_reset_control_get(dev, "sata0"); + if (IS_ERR(sg->sata0_reset)) { + dev_err(dev, "no SATA0 reset controller\n"); + clk_disable_unprepare(sg->sata1_pclk); + clk_disable_unprepare(sg->sata0_pclk); + return PTR_ERR(sg->sata0_reset); + } + sg->sata1_reset = devm_reset_control_get(dev, "sata1"); + if (IS_ERR(sg->sata1_reset)) { + dev_err(dev, "no SATA1 reset controller\n"); + clk_disable_unprepare(sg->sata1_pclk); + clk_disable_unprepare(sg->sata0_pclk); + return PTR_ERR(sg->sata1_reset); + } + + sata_id = readl(sg->base + GEMINI_SATA_ID); + sata_phy_id = readl(sg->base + GEMINI_SATA_PHY_ID); + sg->sata_bridge = true; + clk_disable(sg->sata0_pclk); + clk_disable(sg->sata1_pclk); + + dev_info(dev, "SATA ID %08x, PHY ID: %08x\n", sata_id, sata_phy_id); + + return 0; +} + +static int gemini_sata_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct sata_gemini *sg; + static struct regmap *map; + struct resource *res; + enum gemini_muxmode muxmode; + u32 gmode; + u32 gmask; + u32 val; + int ret; + + sg = devm_kzalloc(dev, sizeof(*sg), GFP_KERNEL); + if (!sg) + return -ENOMEM; + sg->dev = dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + sg->base = devm_ioremap_resource(dev, res); + if (IS_ERR(sg->base)) + return PTR_ERR(sg->base); + + map = syscon_regmap_lookup_by_phandle(np, "syscon"); + if (IS_ERR(map)) { + dev_err(dev, "no global syscon\n"); + return PTR_ERR(map); + } + + /* Set up the SATA bridge if need be */ + if (of_property_read_bool(np, "cortina,gemini-enable-sata-bridge")) { + ret = gemini_sata_bridge_init(sg); + if (ret) + return ret; + } + + if (of_property_read_bool(np, "cortina,gemini-enable-ide-pins")) + sg->ide_pins = true; + + if (!sg->sata_bridge && !sg->ide_pins) { + dev_err(dev, "neither SATA bridge or IDE output enabled\n"); + ret = -EINVAL; + goto out_unprep_clk; + } + + ret = of_property_read_u32(np, "cortina,gemini-ata-muxmode", &muxmode); + if (ret) { + dev_err(dev, "could not parse ATA muxmode\n"); + goto out_unprep_clk; + } + if (muxmode > GEMINI_MUXMODE_3) { + dev_err(dev, "illegal muxmode %d\n", muxmode); + ret = -EINVAL; + goto out_unprep_clk; + } + sg->muxmode = muxmode; + gmask = GEMINI_IDE_IOMUX_MASK; + gmode = (muxmode << GEMINI_IDE_IOMUX_SHIFT); + + /* + * If we mux out the IDE, parallel flash must be disabled. + * SATA0 and SATA1 have dedicated pins and may coexist with + * parallel flash. + */ + if (sg->ide_pins) + gmode |= GEMINI_IDE_PADS_ENABLE | GEMINI_PFLASH_PADS_DISABLE; + else + gmask |= GEMINI_IDE_PADS_ENABLE; + + ret = regmap_update_bits(map, GEMINI_GLOBAL_MISC_CTRL, gmask, gmode); + if (ret) { + dev_err(dev, "unable to set up IDE muxing\n"); + ret = -ENODEV; + goto out_unprep_clk; + } + + /* FIXME: add more elaborate IDE skew control handling */ + if (sg->ide_pins) { + ret = regmap_read(map, GEMINI_GLOBAL_IDE_SKEW_CTRL, &val); + if (ret) { + dev_err(dev, "cannot read IDE skew control register\n"); + return ret; + } + dev_info(dev, "IDE skew control: %08x\n", val); + } + + dev_info(dev, "set up the Gemini IDE/SATA nexus\n"); + platform_set_drvdata(pdev, sg); + sg_singleton = sg; + + return 0; + +out_unprep_clk: + if (sg->sata_bridge) { + clk_unprepare(sg->sata1_pclk); + clk_unprepare(sg->sata0_pclk); + } + return ret; +} + +static int gemini_sata_remove(struct platform_device *pdev) +{ + struct sata_gemini *sg = platform_get_drvdata(pdev); + + if (sg->sata_bridge) { + clk_unprepare(sg->sata1_pclk); + clk_unprepare(sg->sata0_pclk); + } + sg_singleton = NULL; + + return 0; +} + +static const struct of_device_id gemini_sata_of_match[] = { + { + .compatible = "cortina,gemini-sata-bridge", + }, + {}, +}; + +static struct platform_driver gemini_sata_driver = { + .driver = { + .name = DRV_NAME, + .of_match_table = of_match_ptr(gemini_sata_of_match), + }, + .probe = gemini_sata_probe, + .remove = gemini_sata_remove, +}; +module_platform_driver(gemini_sata_driver); + +MODULE_AUTHOR("Linus Walleij "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/ata/sata_gemini.h b/drivers/ata/sata_gemini.h new file mode 100644 index 000000000000..ca1837a394c8 --- /dev/null +++ b/drivers/ata/sata_gemini.h @@ -0,0 +1,21 @@ +/* Header for the Gemini SATA bridge */ +#ifndef SATA_GEMINI_H +#define SATA_GEMINI_H + +struct sata_gemini; + +enum gemini_muxmode { + GEMINI_MUXMODE_0 = 0, + GEMINI_MUXMODE_1, + GEMINI_MUXMODE_2, + GEMINI_MUXMODE_3, +}; + +struct sata_gemini *gemini_sata_bridge_get(void); +bool gemini_sata_bridge_enabled(struct sata_gemini *sg, bool is_ata1); +enum gemini_muxmode gemini_sata_get_muxmode(struct sata_gemini *sg); +int gemini_sata_start_bridge(struct sata_gemini *sg, unsigned int bridge); +void gemini_sata_stop_bridge(struct sata_gemini *sg, unsigned int bridge); +int gemini_sata_reset_bridge(struct sata_gemini *sg, unsigned int bridge); + +#endif