From: Mintz, Yuval Date: Thu, 6 Apr 2017 12:58:31 +0000 (+0300) Subject: qed: Don't close the OUT_EN during init X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=bd1cc771f9d2374f9f1c0edbd01d27893723e8da;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git qed: Don't close the OUT_EN during init Before initializing the chip's engine, driver currently closes a set of registers on the HW's ingress flow to prevent packets from slipping in while they're not supposed to. This configuration is insufficient, as there are some scenarios where packets would still arrive even when said registers are set, but the management firmware already closes other per-port registers that do suffice, making this setting unnecessray. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c index c5f48860a934..fb759ba34b8d 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dev.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c @@ -1279,18 +1279,6 @@ static int qed_hw_init_common(struct qed_hwfn *p_hwfn, qed_cxt_hw_init_common(p_hwfn); - /* Close gate from NIG to BRB/Storm; By default they are open, but - * we close them to prevent NIG from passing data to reset blocks. - * Should have been done in the ENGINE phase, but init-tool lacks - * proper port-pretend capabilities. - */ - qed_wr(p_hwfn, p_ptt, NIG_REG_RX_BRB_OUT_EN, 0); - qed_wr(p_hwfn, p_ptt, NIG_REG_STORM_OUT_EN, 0); - qed_port_pretend(p_hwfn, p_ptt, p_hwfn->port_id ^ 1); - qed_wr(p_hwfn, p_ptt, NIG_REG_RX_BRB_OUT_EN, 0); - qed_wr(p_hwfn, p_ptt, NIG_REG_STORM_OUT_EN, 0); - qed_port_unpretend(p_hwfn, p_ptt); - qed_init_cache_line_size(p_hwfn, p_ptt); rc = qed_init_run(p_hwfn, p_ptt, PHASE_ENGINE, ANY_PHASE_ID, hw_mode);