From: Laurent Pinchart Date: Mon, 19 May 2014 22:40:04 +0000 (-0300) Subject: [media] omap3isp: ccdc: Support the interlaced field orders at the CCDC output X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=bcb4e0efd1380d93866df51ec5d8dfaa026537ad;p=GitHub%2Fexynos8895%2Fandroid_kernel_samsung_universal8895.git [media] omap3isp: ccdc: Support the interlaced field orders at the CCDC output The CCDC can interleave fields into a single buffer when writing to memory. Support it. Signed-off-by: Laurent Pinchart Tested-by: Enrico Butera Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/platform/omap3isp/ispccdc.c b/drivers/media/platform/omap3isp/ispccdc.c index 49d7256a7de3..8d1861d948d0 100644 --- a/drivers/media/platform/omap3isp/ispccdc.c +++ b/drivers/media/platform/omap3isp/ispccdc.c @@ -863,52 +863,51 @@ static void ccdc_enable_vp(struct isp_ccdc_device *ccdc, u8 enable) /* * ccdc_config_outlineoffset - Configure memory saving output line offset * @ccdc: Pointer to ISP CCDC device. - * @offset: Address offset to start a new line. Must be twice the - * Output width and aligned on 32 byte boundary - * @oddeven: Specifies the odd/even line pattern to be chosen to store the - * output. - * @numlines: Set the value 0-3 for +1-4lines, 4-7 for -1-4lines. + * @bpl: Number of bytes per line when stored in memory. + * @field: Field order when storing interlaced formats in memory. * - * - Configures the output line offset when stored in memory - * - Sets the odd/even line pattern to store the output - * (EVENEVEN (1), ODDEVEN (2), EVENODD (3), ODDODD (4)) - * - Configures the number of even and odd line fields in case of rearranging - * the lines. + * Configure the offsets for the line output control: + * + * - The horizontal line offset is defined as the number of bytes between the + * start of two consecutive lines in memory. Set it to the given bytes per + * line value. + * + * - The field offset value is defined as the number of lines to offset the + * start of the field identified by FID = 1. Set it to one. + * + * - The line offset values are defined as the number of lines (as defined by + * the horizontal line offset) between the start of two consecutive lines for + * all combinations of odd/even lines in odd/even fields. When interleaving + * fields set them all to two lines, and to one line otherwise. */ static void ccdc_config_outlineoffset(struct isp_ccdc_device *ccdc, - u32 offset, u8 oddeven, u8 numlines) + unsigned int bpl, + enum v4l2_field field) { struct isp_device *isp = to_isp_device(ccdc); + u32 sdofst = 0; - isp_reg_writel(isp, offset & 0xffff, - OMAP3_ISP_IOMEM_CCDC, ISPCCDC_HSIZE_OFF); - - isp_reg_clr(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDOFST, - ISPCCDC_SDOFST_FINV); + isp_reg_writel(isp, bpl & 0xffff, OMAP3_ISP_IOMEM_CCDC, + ISPCCDC_HSIZE_OFF); - isp_reg_clr(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDOFST, - ISPCCDC_SDOFST_FOFST_4L); - - switch (oddeven) { - case EVENEVEN: - isp_reg_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDOFST, - (numlines & 0x7) << ISPCCDC_SDOFST_LOFST0_SHIFT); - break; - case ODDEVEN: - isp_reg_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDOFST, - (numlines & 0x7) << ISPCCDC_SDOFST_LOFST1_SHIFT); - break; - case EVENODD: - isp_reg_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDOFST, - (numlines & 0x7) << ISPCCDC_SDOFST_LOFST2_SHIFT); - break; - case ODDODD: - isp_reg_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDOFST, - (numlines & 0x7) << ISPCCDC_SDOFST_LOFST3_SHIFT); + switch (field) { + case V4L2_FIELD_INTERLACED_TB: + case V4L2_FIELD_INTERLACED_BT: + /* When interleaving fields in memory offset field one by one + * line and set the line offset to two lines. + */ + sdofst |= (1 << ISPCCDC_SDOFST_LOFST0_SHIFT) + | (1 << ISPCCDC_SDOFST_LOFST1_SHIFT) + | (1 << ISPCCDC_SDOFST_LOFST2_SHIFT) + | (1 << ISPCCDC_SDOFST_LOFST3_SHIFT); break; + default: + /* In all other cases set the line offsets to one line. */ break; } + + isp_reg_writel(isp, sdofst, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDOFST); } /* @@ -1204,7 +1203,17 @@ static void ccdc_configure(struct isp_ccdc_device *ccdc) << ISPCCDC_VERT_LINES_NLV_SHIFT, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_VERT_LINES); - ccdc_config_outlineoffset(ccdc, ccdc->video_out.bpl_value, 0, 0); + ccdc_config_outlineoffset(ccdc, ccdc->video_out.bpl_value, + format->field); + + /* When interleaving fields enable processing of the field input signal. + * This will cause the line output control module to apply the field + * offset to field 1. + */ + if (ccdc->formats[CCDC_PAD_SINK].field == V4L2_FIELD_ALTERNATE && + (format->field == V4L2_FIELD_INTERLACED_TB || + format->field == V4L2_FIELD_INTERLACED_BT)) + syn_mode |= ISPCCDC_SYN_MODE_FLDMODE; /* The CCDC outputs data in UYVY order by default. Swap bytes to get * YUYV. @@ -1484,6 +1493,7 @@ static int ccdc_isr_buffer(struct isp_ccdc_device *ccdc) struct isp_pipeline *pipe = to_isp_pipeline(&ccdc->subdev.entity); struct isp_device *isp = to_isp_device(ccdc); struct isp_buffer *buffer; + enum v4l2_field field; /* The CCDC generates VD0 interrupts even when disabled (the datasheet * doesn't explicitly state if that's supposed to happen or not, so it @@ -1503,17 +1513,12 @@ static int ccdc_isr_buffer(struct isp_ccdc_device *ccdc) return 1; } - /* When capturing fields in alternate order read the current field - * identifier and store it in the pipeline. - */ - if (ccdc->formats[CCDC_PAD_SOURCE_OF].field == V4L2_FIELD_ALTERNATE) { - u32 syn_mode = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCDC, - ISPCCDC_SYN_MODE); - - pipe->field = syn_mode & ISPCCDC_SYN_MODE_FLDSTAT - ? V4L2_FIELD_BOTTOM : V4L2_FIELD_TOP; - } + /* Read the current field identifier. */ + field = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SYN_MODE) + & ISPCCDC_SYN_MODE_FLDSTAT + ? V4L2_FIELD_BOTTOM : V4L2_FIELD_TOP; + /* Wait for the CCDC to become idle. */ if (ccdc_sbl_wait_idle(ccdc, 1000)) { dev_info(isp->dev, "CCDC won't become idle!\n"); isp->crashed |= 1U << ccdc->subdev.entity.id; @@ -1521,6 +1526,28 @@ static int ccdc_isr_buffer(struct isp_ccdc_device *ccdc) return 0; } + switch (ccdc->formats[CCDC_PAD_SOURCE_OF].field) { + case V4L2_FIELD_ALTERNATE: + /* When capturing fields in alternate order store the current + * field identifier in the pipeline. + */ + pipe->field = field; + break; + + case V4L2_FIELD_INTERLACED_TB: + /* When interleaving fields only complete the buffer after + * capturing the second field. + */ + if (field == V4L2_FIELD_TOP) + return 1; + break; + + case V4L2_FIELD_INTERLACED_BT: + if (field == V4L2_FIELD_BOTTOM) + return 1; + break; + } + buffer = omap3isp_video_buffer_next(&ccdc->video_out); if (buffer != NULL) ccdc_set_outaddr(ccdc, buffer->dma); @@ -1829,6 +1856,7 @@ ccdc_try_format(struct isp_ccdc_device *ccdc, struct v4l2_subdev_fh *fh, unsigned int width = fmt->width; unsigned int height = fmt->height; struct v4l2_rect *crop; + enum v4l2_field field; unsigned int i; switch (pad) { @@ -1854,6 +1882,7 @@ ccdc_try_format(struct isp_ccdc_device *ccdc, struct v4l2_subdev_fh *fh, case CCDC_PAD_SOURCE_OF: pixelcode = fmt->code; + field = fmt->field; *fmt = *__ccdc_get_format(ccdc, fh, CCDC_PAD_SINK, which); /* YUV formats are converted from 2X8 to 1X16 by the bridge and @@ -1878,6 +1907,17 @@ ccdc_try_format(struct isp_ccdc_device *ccdc, struct v4l2_subdev_fh *fh, crop = __ccdc_get_crop(ccdc, fh, which); fmt->width = crop->width; fmt->height = crop->height; + + /* When input format is interlaced with alternating fields the + * CCDC can interleave the fields. + */ + if (fmt->field == V4L2_FIELD_ALTERNATE && + (field == V4L2_FIELD_INTERLACED_TB || + field == V4L2_FIELD_INTERLACED_BT)) { + fmt->field = field; + fmt->height *= 2; + } + break; case CCDC_PAD_SOURCE_VP: diff --git a/drivers/media/platform/omap3isp/ispreg.h b/drivers/media/platform/omap3isp/ispreg.h index f37a8df23cf6..b5ea8da0b904 100644 --- a/drivers/media/platform/omap3isp/ispreg.h +++ b/drivers/media/platform/omap3isp/ispreg.h @@ -730,17 +730,13 @@ #define ISPCCDC_HSIZE_OFF_SHIFT 0 -#define ISPCCDC_SDOFST_FINV (1 << 14) -#define ISPCCDC_SDOFST_FOFST_1L 0 -#define ISPCCDC_SDOFST_FOFST_4L (3 << 12) +#define ISPCCDC_SDOFST_FIINV (1 << 14) +#define ISPCCDC_SDOFST_FOFST_SHIFT 12 +#define ISPCCDC_SDOFST_FOFST_MASK (3 << 12) #define ISPCCDC_SDOFST_LOFST3_SHIFT 0 #define ISPCCDC_SDOFST_LOFST2_SHIFT 3 #define ISPCCDC_SDOFST_LOFST1_SHIFT 6 #define ISPCCDC_SDOFST_LOFST0_SHIFT 9 -#define EVENEVEN 1 -#define ODDEVEN 2 -#define EVENODD 3 -#define ODDODD 4 #define ISPCCDC_CLAMP_OBGAIN_SHIFT 0 #define ISPCCDC_CLAMP_OBST_SHIFT 10 diff --git a/drivers/media/platform/omap3isp/ispvideo.c b/drivers/media/platform/omap3isp/ispvideo.c index c38f1d4cc538..bc38c88c7bd9 100644 --- a/drivers/media/platform/omap3isp/ispvideo.c +++ b/drivers/media/platform/omap3isp/ispvideo.c @@ -637,14 +637,40 @@ isp_video_set_format(struct file *file, void *fh, struct v4l2_format *format) if (format->type != video->type) return -EINVAL; - /* Default to the progressive field order if the requested value is not - * supported (or set to ANY). The only supported orders are progressive - * (available on all video nodes) and alternate (available on capture - * nodes only). - */ - if (format->fmt.pix.field != V4L2_FIELD_ALTERNATE || - video->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) + /* Replace unsupported field orders with sane defaults. */ + switch (format->fmt.pix.field) { + case V4L2_FIELD_NONE: + /* Progressive is supported everywhere. */ + break; + case V4L2_FIELD_ALTERNATE: + /* ALTERNATE is not supported on output nodes. */ + if (video->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) + format->fmt.pix.field = V4L2_FIELD_NONE; + break; + case V4L2_FIELD_INTERLACED: + /* The ISP has no concept of video standard, select the + * top-bottom order when the unqualified interlaced order is + * requested. + */ + format->fmt.pix.field = V4L2_FIELD_INTERLACED_TB; + /* Fall-through */ + case V4L2_FIELD_INTERLACED_TB: + case V4L2_FIELD_INTERLACED_BT: + /* Interlaced orders are only supported at the CCDC output. */ + if (video != &video->isp->isp_ccdc.video_out) + format->fmt.pix.field = V4L2_FIELD_NONE; + break; + case V4L2_FIELD_TOP: + case V4L2_FIELD_BOTTOM: + case V4L2_FIELD_SEQ_TB: + case V4L2_FIELD_SEQ_BT: + default: + /* All other field orders are currently unsupported, default to + * progressive. + */ format->fmt.pix.field = V4L2_FIELD_NONE; + break; + } /* Fill the bytesperline and sizeimage fields by converting to media bus * format and back to pixel format.