From: Johan Hovold Date: Thu, 21 Mar 2013 11:37:38 +0000 (+0100) Subject: USB: io_ti: always disable uart on close X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=bca87e9efb5258749f016a63b2abed40229c68c9;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git USB: io_ti: always disable uart on close Always try to disable the uart on close. Since the switch to tty ports, close will be called as part of shutdown before disconnect returns. Hence there is no need to check the disconnected flag, and we can put devices in disabled states also on driver unbind. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 8914002a0f65..0ccc4225d593 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -1907,21 +1907,10 @@ static void edge_close(struct usb_serial_port *port) kfifo_reset_out(&edge_port->write_fifo); spin_unlock_irqrestore(&edge_port->ep_lock, flags); - /* assuming we can still talk to the device, - * send a close port command to it */ dev_dbg(&port->dev, "%s - send umpc_close_port\n", __func__); port_number = port->number - port->serial->minor; - - mutex_lock(&serial->disc_mutex); - if (!serial->disconnected) { - send_cmd(serial->dev, - UMPC_CLOSE_PORT, - (__u8)(UMPM_UART1_PORT + port_number), - 0, - NULL, - 0); - } - mutex_unlock(&serial->disc_mutex); + send_cmd(serial->dev, UMPC_CLOSE_PORT, + (__u8)(UMPM_UART1_PORT + port_number), 0, NULL, 0); mutex_lock(&edge_serial->es_lock); --edge_port->edge_serial->num_ports_open;