From: Linus Walleij Date: Fri, 30 Oct 2015 09:32:19 +0000 (+0100) Subject: gpio: group port-mapped I/O drivers in a menu X-Git-Tag: MMI-PSA29.97-13-9~9154^2~6 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=bc6a73bbfba5d8325b0e659545ce2f3ad983829b;p=GitHub%2FMotorolaMobilityLLC%2Fkernel-slsi.git gpio: group port-mapped I/O drivers in a menu Create a Kconfig submenu for drivers using X86 port-mapped I/O and depend on X86 for this. Suggested-by: Mika Westerberg Cc: William Breathitt Gray Cc: Andreas Bofjall Cc: Diego Elio Pettenò Cc: Daniel Krueger Cc: Bruno Randolf Cc: Vivien Didelot Acked-by: Simon Guinot Signed-off-by: Linus Walleij --- diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index dbb171d46a48..d20644b9e5b9 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -183,16 +183,6 @@ config GPIO_ETRAXFS help Say yes here to support the GPIO controller on Axis ETRAX FS SoCs. -config GPIO_F7188X - tristate "F71869, F71869A, F71882FG and F71889F GPIO support" - depends on X86 - help - This option enables support for GPIOs found on Fintek Super-I/O - chips F71869, F71869A, F71882FG and F71889F. - - To compile this driver as a module, choose M here: the module will - be called f7188x-gpio. - config GPIO_GE_FPGA bool "GE FPGA based GPIO" depends on GE_FPGA @@ -242,18 +232,6 @@ config GPIO_IOP If unsure, say N. -config GPIO_IT87 - tristate "IT87xx GPIO support" - depends on X86 # unconditional access to IO space. - help - Say yes here to support GPIO functionality of IT87xx Super I/O chips. - - This driver is tested with ITE IT8728 and IT8732 Super I/O chips, and - supports the IT8761E Super I/O chip as well. - - To compile this driver as a module, choose M here: the module will - be called gpio_it87 - config GPIO_LOONGSON bool "Loongson-2/3 GPIO support" depends on CPU_LOONGSON2 || CPU_LOONGSON3 @@ -373,42 +351,6 @@ config GPIO_SAMSUNG Legacy GPIO support. Use only for platforms without support for pinctrl. -config GPIO_SCH - tristate "Intel SCH/TunnelCreek/Centerton/Quark X1000 GPIO" - depends on PCI && X86 - select MFD_CORE - select LPC_SCH - help - Say yes here to support GPIO interface on Intel Poulsbo SCH, - Intel Tunnel Creek processor, Intel Centerton processor or - Intel Quark X1000 SoC. - - The Intel SCH contains a total of 14 GPIO pins. Ten GPIOs are - powered by the core power rail and are turned off during sleep - modes (S3 and higher). The remaining four GPIOs are powered by - the Intel SCH suspend power supply. These GPIOs remain - active during S3. The suspend powered GPIOs can be used to wake the - system from the Suspend-to-RAM state. - - The Intel Tunnel Creek processor has 5 GPIOs powered by the - core power rail and 9 from suspend power supply. - - The Intel Centerton processor has a total of 30 GPIO pins. - Twenty-one are powered by the core power rail and 9 from the - suspend power supply. - - The Intel Quark X1000 SoC has 2 GPIOs powered by the core - power well and 6 from the suspend power well. - -config GPIO_SCH311X - tristate "SMSC SCH311x SuperI/O GPIO" - help - Driver to enable the GPIOs found on SMSC SMSC SCH3112, SCH3114 and - SCH3116 "Super I/O" chipsets. - - To compile this driver as a module, choose M here: the module will - be called gpio-sch311x. - config GPIO_SPEAR_SPICS bool "ST SPEAr13xx SPI Chip Select as GPIO support" depends on PLAT_SPEAR @@ -445,15 +387,6 @@ config GPIO_TB10X select GENERIC_IRQ_CHIP select OF_GPIO -config GPIO_TS5500 - tristate "TS-5500 DIO blocks and compatibles" - depends on TS5500 || COMPILE_TEST - help - This driver supports Digital I/O exposed by pin blocks found on some - Technologic Systems platforms. It includes, but is not limited to, 3 - blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600 - LCD port. - config GPIO_TZ1090 bool "Toumaz Xenif TZ1090 GPIO support" depends on SOC_TZ1090 @@ -552,6 +485,84 @@ config GPIO_ZYNQ endmenu +menu "Port-mapped I/O GPIO drivers" + depends on X86 + +config GPIO_104_IDIO_16 + tristate "ACCES 104-IDIO-16 GPIO support" + depends on X86 + help + Enables GPIO support for the ACCES 104-IDIO-16 family. + +config GPIO_F7188X + tristate "F71869, F71869A, F71882FG and F71889F GPIO support" + depends on X86 + help + This option enables support for GPIOs found on Fintek Super-I/O + chips F71869, F71869A, F71882FG and F71889F. + + To compile this driver as a module, choose M here: the module will + be called f7188x-gpio. + +config GPIO_IT87 + tristate "IT87xx GPIO support" + depends on X86 # unconditional access to IO space. + help + Say yes here to support GPIO functionality of IT87xx Super I/O chips. + + This driver is tested with ITE IT8728 and IT8732 Super I/O chips, and + supports the IT8761E Super I/O chip as well. + + To compile this driver as a module, choose M here: the module will + be called gpio_it87 + +config GPIO_SCH + tristate "Intel SCH/TunnelCreek/Centerton/Quark X1000 GPIO" + depends on PCI && X86 + select MFD_CORE + select LPC_SCH + help + Say yes here to support GPIO interface on Intel Poulsbo SCH, + Intel Tunnel Creek processor, Intel Centerton processor or + Intel Quark X1000 SoC. + + The Intel SCH contains a total of 14 GPIO pins. Ten GPIOs are + powered by the core power rail and are turned off during sleep + modes (S3 and higher). The remaining four GPIOs are powered by + the Intel SCH suspend power supply. These GPIOs remain + active during S3. The suspend powered GPIOs can be used to wake the + system from the Suspend-to-RAM state. + + The Intel Tunnel Creek processor has 5 GPIOs powered by the + core power rail and 9 from suspend power supply. + + The Intel Centerton processor has a total of 30 GPIO pins. + Twenty-one are powered by the core power rail and 9 from the + suspend power supply. + + The Intel Quark X1000 SoC has 2 GPIOs powered by the core + power well and 6 from the suspend power well. + +config GPIO_SCH311X + tristate "SMSC SCH311x SuperI/O GPIO" + help + Driver to enable the GPIOs found on SMSC SMSC SCH3112, SCH3114 and + SCH3116 "Super I/O" chipsets. + + To compile this driver as a module, choose M here: the module will + be called gpio-sch311x. + +config GPIO_TS5500 + tristate "TS-5500 DIO blocks and compatibles" + depends on TS5500 || COMPILE_TEST + help + This driver supports Digital I/O exposed by pin blocks found on some + Technologic Systems platforms. It includes, but is not limited to, 3 + blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600 + LCD port. + +endmenu + menu "I2C GPIO expanders" depends on I2C @@ -689,16 +700,6 @@ config GPIO_SX150X endmenu -menu "ISA GPIO drivers" - -config GPIO_104_IDIO_16 - tristate "ACCES 104-IDIO-16 GPIO support" - depends on X86 - help - Enables GPIO support for the ACCES 104-IDIO-16 family. - -endmenu - menu "MFD GPIO expanders" config GPIO_ADP5520