From: Soren Brinkmann Date: Wed, 27 Nov 2013 20:16:23 +0000 (-0800) Subject: clk/zynq/clkc: Add 'fclk-enable' feature X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=ba52f8a986089e263ea28e231b6a405769ae1235;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git clk/zynq/clkc: Add 'fclk-enable' feature In some use cases Zynq's FPGA clocks are used as static clock generators for IP in the FPGA part of the SOC for which no Linux driver exists and would control those clocks. To avoid automatic gating of these clocks in such cases a new property - fclk-enable - is added to the clock controller's DT description to accomodate such use cases. It's value is a bitmask, where a set bit results in enabling the corresponding FCLK through the clkc. FPGA clocks are handled following the rules below: If an FCLK is not enabled by bootloaders, that FCLK will be disabled in Linux. Drivers can enable and control it through the CCF as usual. If an FCLK is enabled by bootloaders AND the corresponding bit in the 'fclk-enable' DT property is set, that FCLK will be enabled by the clkc, resulting in an off by one reference count for that clock. Ensuring it will always be running. Signed-off-by: Soren Brinkmann Acked-by: Michal Simek Signed-off-by: Michal Simek --- diff --git a/Documentation/devicetree/bindings/clock/zynq-7000.txt b/Documentation/devicetree/bindings/clock/zynq-7000.txt index d99af878f5d7..17b4a94916d6 100644 --- a/Documentation/devicetree/bindings/clock/zynq-7000.txt +++ b/Documentation/devicetree/bindings/clock/zynq-7000.txt @@ -22,6 +22,10 @@ Required properties: Optional properties: - clocks : as described in the clock bindings - clock-names : as described in the clock bindings + - fclk-enable : Bit mask to enable FCLKs statically at boot time. + Bit [0..3] correspond to FCLK0..FCLK3. The corresponding + FCLK will only be enabled if it is actually running at + boot time. Clock inputs: The following strings are optional parameters to the 'clock-names' property in diff --git a/drivers/clk/zynq/clkc.c b/drivers/clk/zynq/clkc.c index 10772aa72e4e..09dd0173ea0a 100644 --- a/drivers/clk/zynq/clkc.c +++ b/drivers/clk/zynq/clkc.c @@ -102,9 +102,10 @@ static const char *swdt_ext_clk_input_names[] __initdata = {"swdt_ext_clk"}; static void __init zynq_clk_register_fclk(enum zynq_clk fclk, const char *clk_name, void __iomem *fclk_ctrl_reg, - const char **parents) + const char **parents, int enable) { struct clk *clk; + u32 enable_reg; char *mux_name; char *div0_name; char *div1_name; @@ -147,6 +148,12 @@ static void __init zynq_clk_register_fclk(enum zynq_clk fclk, clks[fclk] = clk_register_gate(NULL, clk_name, div1_name, CLK_SET_RATE_PARENT, fclk_gate_reg, 0, CLK_GATE_SET_TO_DISABLE, fclk_gate_lock); + enable_reg = readl(fclk_gate_reg) & 1; + if (enable && !enable_reg) { + if (clk_prepare_enable(clks[fclk])) + pr_warn("%s: FCLK%u enable failed\n", __func__, + fclk - fclk0); + } kfree(mux_name); kfree(div0_name); kfree(div1_name); @@ -213,6 +220,7 @@ static void __init zynq_clk_setup(struct device_node *np) int ret; struct clk *clk; char *clk_name; + unsigned int fclk_enable = 0; const char *clk_output_name[clk_max]; const char *cpu_parents[4]; const char *periph_parents[4]; @@ -238,6 +246,8 @@ static void __init zynq_clk_setup(struct device_node *np) periph_parents[2] = clk_output_name[armpll]; periph_parents[3] = clk_output_name[ddrpll]; + of_property_read_u32(np, "fclk-enable", &fclk_enable); + /* ps_clk */ ret = of_property_read_u32(np, "ps-clk-frequency", &tmp); if (ret) { @@ -340,10 +350,12 @@ static void __init zynq_clk_setup(struct device_node *np) clk_prepare_enable(clks[dci]); /* Peripheral clocks */ - for (i = fclk0; i <= fclk3; i++) + for (i = fclk0; i <= fclk3; i++) { + int enable = !!(fclk_enable & BIT(i - fclk0)); zynq_clk_register_fclk(i, clk_output_name[i], SLCR_FPGA0_CLK_CTRL + 0x10 * (i - fclk0), - periph_parents); + periph_parents, enable); + } zynq_clk_register_periph_clk(lqspi, 0, clk_output_name[lqspi], NULL, SLCR_LQSPI_CLK_CTRL, periph_parents, 0);