From: David McKay Date: Tue, 21 Feb 2012 21:24:57 +0000 (+0000) Subject: netdev/phy/icplus: Correct broken phy_init code X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=b8e3995af4c7da7707b1710332a31f66e06b74dc;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git netdev/phy/icplus: Correct broken phy_init code The code for ip1001_config_init() was totally broken if you were not using RGMII. Instead of returning an error code or zero it actually returned the value in the IP1001_SPEC_CTRL_STATUS_2 register. It was also trying to set the IP1001_APS_ON bit , but never actually wrote back the register. The error checking was also incorrect in both this function and the reset function, so this patch fixes that up in a consistent fashion. Signed-off-by: David McKay Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c index c81f136ae670..7ee4f5822bb9 100644 --- a/drivers/net/phy/icplus.c +++ b/drivers/net/phy/icplus.c @@ -98,20 +98,24 @@ static int ip175c_config_init(struct phy_device *phydev) static int ip1xx_reset(struct phy_device *phydev) { - int err, bmcr; + int bmcr; /* Software Reset PHY */ bmcr = phy_read(phydev, MII_BMCR); + if (bmcr < 0) + return bmcr; bmcr |= BMCR_RESET; - err = phy_write(phydev, MII_BMCR, bmcr); - if (err < 0) - return err; + bmcr = phy_write(phydev, MII_BMCR, bmcr); + if (bmcr < 0) + return bmcr; do { bmcr = phy_read(phydev, MII_BMCR); + if (bmcr < 0) + return bmcr; } while (bmcr & BMCR_RESET); - return err; + return 0; } static int ip1001_config_init(struct phy_device *phydev) @@ -124,7 +128,10 @@ static int ip1001_config_init(struct phy_device *phydev) /* Enable Auto Power Saving mode */ c = phy_read(phydev, IP1001_SPEC_CTRL_STATUS_2); + if (c < 0) + return c; c |= IP1001_APS_ON; + c = phy_write(phydev, IP1001_SPEC_CTRL_STATUS_2, c); if (c < 0) return c; @@ -132,11 +139,16 @@ static int ip1001_config_init(struct phy_device *phydev) /* Additional delay (2ns) used to adjust RX clock phase * at RGMII interface */ c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS); + if (c < 0) + return c; + c |= IP1001_PHASE_SEL_MASK; c = phy_write(phydev, IP10XX_SPEC_CTRL_STATUS, c); + if (c < 0) + return c; } - return c; + return 0; } static int ip101a_config_init(struct phy_device *phydev)