From: Iain Churcher Date: Mon, 3 May 2010 09:35:37 +0000 (+0100) Subject: Staging: comedi: Fix Checkpatch.pl issues in mpc624.c X-Git-Tag: MMI-PSA29.97-13-9~23841^2^2~279 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=b8c623e5dde98a00ada4af47bec92a708794c573;p=GitHub%2FMotorolaMobilityLLC%2Fkernel-slsi.git Staging: comedi: Fix Checkpatch.pl issues in mpc624.c This patch resolves all checkpatch.pl issues in the mpc624.c file Signed-off-by: Iain Churcher Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/mpc624.c b/drivers/staging/comedi/drivers/mpc624.c index 12e72c828157..9874ac3749c3 100644 --- a/drivers/staging/comedi/drivers/mpc624.c +++ b/drivers/staging/comedi/drivers/mpc624.c @@ -40,20 +40,20 @@ Status: working Configuration Options: [0] - I/O base address [1] - convertion rate - Convertion rate RMS noise Effective Number Of Bits - 0 3.52kHz 23uV 17 - 1 1.76kHz 3.5uV 20 - 2 880Hz 2uV 21.3 - 3 440Hz 1.4uV 21.8 - 4 220Hz 1uV 22.4 - 5 110Hz 750uV 22.9 - 6 55Hz 510nV 23.4 - 7 27.5Hz 375nV 24 - 8 13.75Hz 250nV 24.4 - 9 6.875Hz 200nV 24.6 - [2] - voltage range - 0 -1.01V .. +1.01V - 1 -10.1V .. +10.1V + Convertion rate RMS noise Effective Number Of Bits + 0 3.52kHz 23uV 17 + 1 1.76kHz 3.5uV 20 + 2 880Hz 2uV 21.3 + 3 440Hz 1.4uV 21.8 + 4 220Hz 1uV 22.4 + 5 110Hz 750uV 22.9 + 6 55Hz 510nV 23.4 + 7 27.5Hz 375nV 24 + 8 13.75Hz 250nV 24.4 + 9 6.875Hz 200nV 24.6 + [2] - voltage range + 0 -1.01V .. +1.01V + 1 -10.1V .. +10.1V */ #include "../comedidev.h" @@ -65,13 +65,13 @@ Configuration Options: #define MPC624_SIZE 16 /* Offsets of different ports */ -#define MPC624_MASTER_CONTROL 0 /* not used */ -#define MPC624_GNMUXCH 1 /* Gain, Mux, Channel of ADC */ -#define MPC624_ADC 2 /* read/write to/from ADC */ -#define MPC624_EE 3 /* read/write to/from serial EEPROM via I2C */ -#define MPC624_LEDS 4 /* write to LEDs */ -#define MPC624_DIO 5 /* read/write to/from digital I/O ports */ -#define MPC624_IRQ_MASK 6 /* IRQ masking enable/disable */ +#define MPC624_MASTER_CONTROL 0 /* not used */ +#define MPC624_GNMUXCH 1 /* Gain, Mux, Channel of ADC */ +#define MPC624_ADC 2 /* read/write to/from ADC */ +#define MPC624_EE 3 /* read/write to/from serial EEPROM via I2C */ +#define MPC624_LEDS 4 /* write to LEDs */ +#define MPC624_DIO 5 /* read/write to/from digital I/O ports */ +#define MPC624_IRQ_MASK 6 /* IRQ masking enable/disable */ /* Register bits' names */ #define MPC624_ADBUSY (1<<5) @@ -109,24 +109,27 @@ Configuration Options: * ^ - Effective Number Of Bits */ -#define MPC624_SPEED_3_52_kHz (MPC624_OSR4 | MPC624_OSR0) -#define MPC624_SPEED_1_76_kHz (MPC624_OSR4 | MPC624_OSR1) -#define MPC624_SPEED_880_Hz (MPC624_OSR4 | MPC624_OSR1 | MPC624_OSR0) -#define MPC624_SPEED_440_Hz (MPC624_OSR4 | MPC624_OSR2) -#define MPC624_SPEED_220_Hz (MPC624_OSR4 | MPC624_OSR2 | MPC624_OSR0) -#define MPC624_SPEED_110_Hz (MPC624_OSR4 | MPC624_OSR2 | MPC624_OSR1) -#define MPC624_SPEED_55_Hz (MPC624_OSR4 | MPC624_OSR2 | MPC624_OSR1 | MPC624_OSR0) -#define MPC624_SPEED_27_5_Hz (MPC624_OSR4 | MPC624_OSR3) -#define MPC624_SPEED_13_75_Hz (MPC624_OSR4 | MPC624_OSR3 | MPC624_OSR0) -#define MPC624_SPEED_6_875_Hz (MPC624_OSR4 | MPC624_OSR3 | MPC624_OSR2 | MPC624_OSR1 | MPC624_OSR0) -/* ---------------------------------------------------------------------------- */ +#define MPC624_SPEED_3_52_kHz (MPC624_OSR4 | MPC624_OSR0) +#define MPC624_SPEED_1_76_kHz (MPC624_OSR4 | MPC624_OSR1) +#define MPC624_SPEED_880_Hz (MPC624_OSR4 | MPC624_OSR1 | MPC624_OSR0) +#define MPC624_SPEED_440_Hz (MPC624_OSR4 | MPC624_OSR2) +#define MPC624_SPEED_220_Hz (MPC624_OSR4 | MPC624_OSR2 | MPC624_OSR0) +#define MPC624_SPEED_110_Hz (MPC624_OSR4 | MPC624_OSR2 | MPC624_OSR1) +#define MPC624_SPEED_55_Hz \ + (MPC624_OSR4 | MPC624_OSR2 | MPC624_OSR1 | MPC624_OSR0) +#define MPC624_SPEED_27_5_Hz (MPC624_OSR4 | MPC624_OSR3) +#define MPC624_SPEED_13_75_Hz (MPC624_OSR4 | MPC624_OSR3 | MPC624_OSR0) +#define MPC624_SPEED_6_875_Hz \ + (MPC624_OSR4 | MPC624_OSR3 | MPC624_OSR2 | MPC624_OSR1 | MPC624_OSR0) +/* -------------------------------------------------------------------------- */ struct skel_private { - unsigned long int ulConvertionRate; /* set by mpc624_attach() from driver's parameters */ + /* set by mpc624_attach() from driver's parameters */ + unsigned long int ulConvertionRate; }; #define devpriv ((struct skel_private *)dev->private) -/* ---------------------------------------------------------------------------- */ +/* -------------------------------------------------------------------------- */ static const struct comedi_lrange range_mpc624_bipolar1 = { 1, { @@ -145,11 +148,11 @@ static const struct comedi_lrange range_mpc624_bipolar10 = { } }; -/* ---------------------------------------------------------------------------- */ +/* -------------------------------------------------------------------------- */ static int mpc624_attach(struct comedi_device *dev, struct comedi_devconfig *it); static int mpc624_detach(struct comedi_device *dev); -/* ---------------------------------------------------------------------------- */ +/* -------------------------------------------------------------------------- */ static struct comedi_driver driver_mpc624 = { .driver_name = "mpc624", .module = THIS_MODULE, @@ -157,20 +160,20 @@ static struct comedi_driver driver_mpc624 = { .detach = mpc624_detach }; -/* ---------------------------------------------------------------------------- */ +/* -------------------------------------------------------------------------- */ static int mpc624_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data); -/* ---------------------------------------------------------------------------- */ +/* -------------------------------------------------------------------------- */ static int mpc624_attach(struct comedi_device *dev, struct comedi_devconfig *it) { struct comedi_subdevice *s; unsigned long iobase; iobase = it->options[0]; - printk("comedi%d: mpc624 [0x%04lx, ", dev->minor, iobase); + printk(KERN_INFO "comedi%d: mpc624 [0x%04lx, ", dev->minor, iobase); if (request_region(iobase, MPC624_SIZE, "mpc624") == NULL) { - printk("I/O port(s) in use\n"); + printk(KERN_ERR "I/O port(s) in use\n"); return -EIO; } @@ -184,47 +187,48 @@ static int mpc624_attach(struct comedi_device *dev, struct comedi_devconfig *it) switch (it->options[1]) { case 0: devpriv->ulConvertionRate = MPC624_SPEED_3_52_kHz; - printk("3.52 kHz, "); + printk(KERN_INFO "3.52 kHz, "); break; case 1: devpriv->ulConvertionRate = MPC624_SPEED_1_76_kHz; - printk("1.76 kHz, "); + printk(KERN_INFO "1.76 kHz, "); break; case 2: devpriv->ulConvertionRate = MPC624_SPEED_880_Hz; - printk("880 Hz, "); + printk(KERN_INFO "880 Hz, "); break; case 3: devpriv->ulConvertionRate = MPC624_SPEED_440_Hz; - printk("440 Hz, "); + printk(KERN_INFO "440 Hz, "); break; case 4: devpriv->ulConvertionRate = MPC624_SPEED_220_Hz; - printk("220 Hz, "); + printk(KERN_INFO "220 Hz, "); break; case 5: devpriv->ulConvertionRate = MPC624_SPEED_110_Hz; - printk("110 Hz, "); + printk(KERN_INFO "110 Hz, "); break; case 6: devpriv->ulConvertionRate = MPC624_SPEED_55_Hz; - printk("55 Hz, "); + printk(KERN_INFO "55 Hz, "); break; case 7: devpriv->ulConvertionRate = MPC624_SPEED_27_5_Hz; - printk("27.5 Hz, "); + printk(KERN_INFO "27.5 Hz, "); break; case 8: devpriv->ulConvertionRate = MPC624_SPEED_13_75_Hz; - printk("13.75 Hz, "); + printk(KERN_INFO "13.75 Hz, "); break; case 9: devpriv->ulConvertionRate = MPC624_SPEED_6_875_Hz; - printk("6.875 Hz, "); + printk(KERN_INFO "6.875 Hz, "); break; default: printk - ("illegal convertion rate setting! Valid numbers are 0..9. Using 9 => 6.875 Hz, "); + (KERN_ERR "illegal convertion rate setting!" + " Valid numbers are 0..9. Using 9 => 6.875 Hz, "); devpriv->ulConvertionRate = MPC624_SPEED_3_52_kHz; } @@ -239,29 +243,29 @@ static int mpc624_attach(struct comedi_device *dev, struct comedi_devconfig *it) switch (it->options[1]) { default: s->maxdata = 0x3FFFFFFF; - printk("30 bit, "); + printk(KERN_INFO "30 bit, "); } switch (it->options[1]) { case 0: s->range_table = &range_mpc624_bipolar1; - printk("1.01V]: "); + printk(KERN_INFO "1.01V]: "); break; default: s->range_table = &range_mpc624_bipolar10; - printk("10.1V]: "); + printk(KERN_INFO "10.1V]: "); } s->len_chanlist = 1; s->insn_read = mpc624_ai_rinsn; - printk("attached\n"); + printk(KERN_INFO "attached\n"); return 1; } static int mpc624_detach(struct comedi_device *dev) { - printk("comedi%d: mpc624: remove\n", dev->minor); + printk(KERN_INFO "comedi%d: mpc624: remove\n", dev->minor); if (dev->iobase) release_region(dev->iobase, MPC624_SIZE); @@ -280,11 +284,14 @@ static int mpc624_ai_rinsn(struct comedi_device *dev, unsigned long int data_in, data_out; unsigned char ucPort; - /* WARNING: We always write 0 to GNSWA bit, so the channel range is +-/10.1Vdc */ + /* + * WARNING: + * We always write 0 to GNSWA bit, so the channel range is +-/10.1Vdc + */ outb(insn->chanspec, dev->iobase + MPC624_GNMUXCH); -/* printk("Channel %d: \n", insn->chanspec); */ +/* printk("Channel %d:\n", insn->chanspec); */ if (!insn->n) { - printk("MPC624: Warning, no data to acquire\n"); + printk(KERN_INFO "MPC624: Warning, no data to acquire\n"); return 0; } @@ -306,7 +313,7 @@ static int mpc624_ai_rinsn(struct comedi_device *dev, break; } if (i == TIMEOUT) { - printk("MPC624: timeout (%dms)\n", TIMEOUT); + printk(KERN_ERR "MPC624: timeout (%dms)\n", TIMEOUT); data[n] = 0; return -ETIMEDOUT; } @@ -319,7 +326,7 @@ static int mpc624_ai_rinsn(struct comedi_device *dev, outb(0, dev->iobase + MPC624_ADC); udelay(1); - if (data_out & (1 << 31)) { /* the next bit is a 1 */ + if (data_out & (1 << 31)) { /* the next bit is a 1 */ /* Set the ADSDI line (send to MPC624) */ outb(MPC624_ADSDI, dev->iobase + MPC624_ADC); udelay(1); @@ -344,31 +351,47 @@ static int mpc624_ai_rinsn(struct comedi_device *dev, data_out <<= 1; } - /* Received 32-bit long value consist of: */ - /* 31: EOC (End Of Transmission) bit - should be 0 */ - /* 30: DMY (Dummy) bit - should be 0 */ - /* 29: SIG (Sign) bit - 1 if the voltage is positive, 0 if negative */ - /* 28: MSB (Most Significant Bit) - the first bit of convertion result */ - /* .... */ - /* 05: LSB (Least Significant Bit) - the last bit of convertion result */ - /* 04: sub-LSB - sub-LSBs are basically noise, but when */ - /* 03: sub-LSB averaged properly, they can increase convertion */ - /* 02: sub-LSB precision up to 29 bits; they can be discarded */ - /* 01: sub-LSB without loss of resolution. */ - /* 00: sub-LSB */ + /* + * Received 32-bit long value consist of: + * 31: EOC - + * (End Of Transmission) bit - should be 0 + * 30: DMY + * (Dummy) bit - should be 0 + * 29: SIG + * (Sign) bit- 1 if the voltage is positive, + * 0 if negative + * 28: MSB + * (Most Significant Bit) - the first bit of + * the conversion result + * .... + * 05: LSB + * (Least Significant Bit)- the last bit of the + * conversion result + * 04-00: sub-LSB + * - sub-LSBs are basically noise, but when + * averaged properly, they can increase conversion + * precision up to 29 bits; they can be discarded + * without loss of resolution. + */ if (data_in & MPC624_EOC_BIT) - printk("MPC624: EOC bit is set (data_in=%lu)!", + printk(KERN_INFO "MPC624:EOC bit is set (data_in=%lu)!", data_in); if (data_in & MPC624_DMY_BIT) - printk("MPC624: DMY bit is set (data_in=%lu)!", + printk(KERN_INFO "MPC624:DMY bit is set (data_in=%lu)!", data_in); - if (data_in & MPC624_SGN_BIT) { /* check the sign bit *//* The voltage is positive */ - data_in &= 0x3FFFFFFF; /* EOC and DMY should be 0, but we will mask them out just to be sure */ - data[n] = data_in; /* comedi operates on unsigned numbers, so we don't clear the SGN bit */ - /* SGN bit is still set! It's correct, since we're converting to unsigned. */ - } else { /* The voltage is negative */ - /* data_in contains a number in 30-bit two's complement code and we must deal with it */ + if (data_in & MPC624_SGN_BIT) { /* Volatge is positive */ + /* + * comedi operates on unsigned numbers, so mask off EOC + * and DMY and don't clear the SGN bit + */ + data_in &= 0x3FFFFFFF; + data[n] = data_in; + } else { /* The voltage is negative */ + /* + * data_in contains a number in 30-bit two's complement + * code and we must deal with it + */ data_in |= MPC624_SGN_BIT; data_in = ~data_in; data_in += 1;