From: Devin Heitmueller Date: Mon, 12 Jul 2010 18:37:00 +0000 (-0300) Subject: [media] cx231xx: Set the power mode instead of using the digital mux GPIOs X-Git-Tag: MMI-PSA29.97-13-9~21911^2~281 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=b88ba6193d5f2469b2b29b52e8cca78a4caa47e0;p=GitHub%2FMotorolaMobilityLLC%2Fkernel-slsi.git [media] cx231xx: Set the power mode instead of using the digital mux GPIOs The Exeter hardware design does not use GPIOs to manage whether its in digital mode or analog mode, but we need to setup the power control properly. For that board, setup power control and remove the mux select call. It is highly likely that this change could be used by other boards as well, which would make power management cleaner (fixing known issues transitioning between analog and digital mode). Signed-off-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/video/cx231xx/cx231xx-core.c b/drivers/media/video/cx231xx/cx231xx-core.c index 4fc62c4f738f..fe3d500424f3 100644 --- a/drivers/media/video/cx231xx/cx231xx-core.c +++ b/drivers/media/video/cx231xx/cx231xx-core.c @@ -746,8 +746,11 @@ int cx231xx_set_mode(struct cx231xx *dev, enum cx231xx_mode set_mode) break; case CX231XX_BOARD_CNXT_RDE_253S: case CX231XX_BOARD_CNXT_RDU_253S: + errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 1); + break; case CX231XX_BOARD_HAUPPAUGE_EXETER: - errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 1); + errCode = cx231xx_set_power_mode(dev, + POLARIS_AVMODE_DIGITAL); break; default: break;