From: Philipp Reisner <philipp.reisner@linbit.com>
Date: Tue, 13 Dec 2011 10:09:16 +0000 (+0100)
Subject: drbd: fix race between disconnect and receive_state
X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=b8853dbd8c6410d1faef2785e8ee4c990b068a77;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git

drbd: fix race between disconnect and receive_state

If the asender thread, or request_timer_fn(), or some other part of
the code, decided to drop the connection (because of timeout or other),
but the receiver just now was processing a P_STATE packet, there was a
chance that receive_state() would do a hard state change
"re-establishing" an already failed connection without additional handshake.

Log excerpt:
  Remote failed to finish a request within ko-count * timeout
  peer( Secondary -> Unknown ) conn( Connected -> Timeout ) pdsk( UpToDate -> DUnknown )
  asender terminated
  ...
  peer( Unknown -> Secondary ) conn( Timeout -> Connected ) pdsk( DUnknown -> UpToDate ) peer_isp( 0 -> 1 )
  ...
  Connection closed
  peer( Secondary -> Unknown ) conn( Connected -> Unconnected ) pdsk( UpToDate -> DUnknown ) peer_isp( 1 -> 0 )
  receiver terminated

Impact:
while the connection state is erroneously "Connected",
requests may be queued and even sent,
which would never be acknowledged,
and may have been missed by the cleanup.
These requests would never be completed.

The next drbd_suspend_io() will then lock up,
waiting forever for these requests to complete.

Fixed in several code paths:
  Make sure the connection state is NetworkFailure or worse
  before starting the cleanup in drbd_disconnect().
  This should make sure the cleanup won't miss any requests.

  Disallow receive_state() to "upgrade" the connection state
  from an error state. This will make sure the "illegal" state
  transition won't happen.

  For all connection failure states,
  relax the safe-guard in sanitize_state() again
  to silently mask out those state changes
  (e.g. Timeout -> Connected becomes Timeout -> Timeout).

 Note by Philipp Reisner:
  The 3rd chunk described as "relax the safe-guard..."
  is not there in 8.4 as it is relaxed to the maximum in
  8.4 already

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
---

diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c
index 733b8bd663d5..1b6845a6ba8d 100644
--- a/drivers/block/drbd/drbd_receiver.c
+++ b/drivers/block/drbd/drbd_receiver.c
@@ -3787,6 +3787,12 @@ static int receive_state(struct drbd_tconn *tconn, struct packet_info *pi)
 	os = ns = drbd_read_state(mdev);
 	spin_unlock_irq(&mdev->tconn->req_lock);
 
+	/* If some other part of the code (asender thread, timeout)
+	 * already decided to close the connection again,
+	 * we must not "re-establish" it here. */
+	if (os.conn <= C_TEAR_DOWN)
+		return false;
+
 	/* If this is the "end of sync" confirmation, usually the peer disk
 	 * transitions from D_INCONSISTENT to D_UP_TO_DATE. For empty (0 bits
 	 * set) resync started in PausedSyncT, or if the timing of pause-/
@@ -4368,6 +4374,13 @@ static void conn_disconnect(struct drbd_tconn *tconn)
 	if (tconn->cstate == C_STANDALONE)
 		return;
 
+	/* We are about to start the cleanup after connection loss.
+	 * Make sure drbd_make_request knows about that.
+	 * Usually we should be in some network failure state already,
+	 * but just in case we are not, we fix it up here.
+	 */
+	conn_request_state(tconn, NS(conn, C_NETWORK_FAILURE), CS_HARD);
+
 	/* asender does not clean up anything. it must not interfere, either */
 	drbd_thread_stop(&tconn->asender);
 	drbd_free_sock(tconn);