From: Ian Abbott <abbotti@mev.co.uk>
Date: Mon, 3 Dec 2012 18:15:43 +0000 (+0000)
Subject: staging: comedi: addi_apci_2032: make insn_bits read live data
X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=b652bd83a0528c43e935cb6f2f8df024b7a85c5e;p=GitHub%2Fmt8127%2Fandroid_kernel_alcatel_ttab.git

staging: comedi: addi_apci_2032: make insn_bits read live data

The `insn_bits` handler for the special digital input subdevice used for
interrupts currently uses `s->state` for the data value, which is set to
the value of the APCI2032_INT_STATUS_REG register when a valid interrupt
occurs.  Just read the live register contents in the `insn_bits` handler
instead of relying on the interrupt service routine to read it for us.

The register contains a couple of hardware error status bits.  They
might also be valid even when the corresponding bits have not been
enabled in the APCI_INT_CTRL_REG register in which case this would be
useful for checking for hardware errors without using interrupts, but
this needs to be checked.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---

diff --git a/drivers/staging/comedi/drivers/addi_apci_2032.c b/drivers/staging/comedi/drivers/addi_apci_2032.c
index aeb34dbe02a4..4c348dd2a5d5 100644
--- a/drivers/staging/comedi/drivers/addi_apci_2032.c
+++ b/drivers/staging/comedi/drivers/addi_apci_2032.c
@@ -159,7 +159,7 @@ static int apci2032_int_insn_bits(struct comedi_device *dev,
 				  struct comedi_insn *insn,
 				  unsigned int *data)
 {
-	data[1] = s->state;
+	data[1] = inl(dev->iobase + APCI2032_INT_STATUS_REG) & 3;
 	return insn->n;
 }
 
@@ -245,10 +245,10 @@ static irqreturn_t apci2032_interrupt(int irq, void *d)
 	if (!val)
 		return IRQ_NONE;
 
-	s->state = inl(dev->iobase + APCI2032_INT_STATUS_REG);
-	outl(0x0, dev->iobase + APCI2032_INT_CTRL_REG);
+	val = inl(dev->iobase + APCI2032_INT_STATUS_REG) & 3;
+	outl(0x00, dev->iobase + APCI2032_INT_CTRL_REG);
 
-	if (comedi_buf_put(s->async, s->state))
+	if (comedi_buf_put(s->async, val))
 		s->async->events |= COMEDI_CB_BLOCK | COMEDI_CB_EOS;
 	else
 		s->async->events |= COMEDI_CB_OVERFLOW;