From: Tim Harvey Date: Tue, 9 Sep 2014 06:07:30 +0000 (-0700) Subject: ARM: dts: imx: ventana: cleanup pinctrl groups X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=b5f37b76053afe8863ce9a753903932eb542eca9;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git ARM: dts: imx: ventana: cleanup pinctrl groups Follow the conventions for pinctrl: - grouping pinctrl in logical alphabatized groups - remove any pinctrl not being used by a driver or needed by user - move iomuxc to bottom of file for readability Signed-off-by: Tim Harvey Signed-off-by: Shawn Guo --- diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index eb28f631279e..822ffb231c57 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -38,6 +38,8 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; led0: user1 { label = "user1"; @@ -65,6 +67,8 @@ pps { compatible = "pps-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -337,27 +341,64 @@ }; }; -&iomuxc { +&ldb { + status = "okay"; +}; + +&pcie { + reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; + status = "okay"; + + eth1: sky2@8 { /* MAC/PHY on bus 8 */ + compatible = "marvell,sky2"; + }; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&iomuxc { imx6q-gw5400-a { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0001b0b0 /* OTG_PWR_EN */ - MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x0001b0b0 /* SPINOR_CS0# */ - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x0001b0b0 /* PCIE IRQ */ - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x0001b0b0 /* PCIE RST */ - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ - MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x0001b0b0 /* GPS_PPS */ - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x0001b0b0 /* TOUCH_IRQ# */ - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x0001b0b0 /* user1 led */ - MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x0001b0b0 /* user2 led */ - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x0001b0b0 /* user3 led */ - MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x4001b0b0 /* USBHUB_RST# */ - MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x4001b0b0 /* MIPI_DIO */ - >; - }; pinctrl_audmux: audmuxgrp { fsl,pins = < @@ -365,6 +406,7 @@ MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ >; }; @@ -373,6 +415,7 @@ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 /* SPINOR_CS0# */ >; }; @@ -397,6 +440,14 @@ >; }; + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 /* user1 led */ + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 /* user2 led */ + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 /* user3 led */ + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 @@ -418,6 +469,19 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */ + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */ + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 /* GPS_PPS */ + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 @@ -442,6 +506,7 @@ pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */ >; }; @@ -457,59 +522,3 @@ }; }; }; - -&ldb { - status = "okay"; -}; - -&pcie { - reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; - status = "okay"; - - eth1: sky2@8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - }; -}; - -&ssi1 { - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; - status = "okay"; -}; - -&usbh1 { - vbus-supply = <®_usb_h1_vbus>; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; - vmmc-supply = <®_3p3v>; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index 2853a1046f8d..f2867c4b34a8 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -27,6 +27,8 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; led0: user1 { label = "user1"; @@ -48,6 +50,8 @@ pps { compatible = "pps-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -163,24 +167,51 @@ status = "okay"; }; -&iomuxc { +&pcie { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>; + status = "okay"; +}; - imx6qdl-gw51xx { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x4001b0b0 /* MEZZ_DIO0 */ - MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x4001b0b0 /* MEZZ_DIO1 */ - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0001b0b0 /* OTG_PWR_EN */ - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x0001b0b0 /* GPS_PPS */ - MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x0001b0b0 /* PHY Reset */ - MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x0001b0b0 /* PCIE_RST# */ - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x0001b0b0 /* user1 led */ - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x0001b0b0 /* user2 led */ - >; - }; +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&iomuxc { + imx6qdl-gw51xx { pinctrl_enet: enetgrp { fsl,pins = < MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 @@ -199,6 +230,14 @@ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 /* PHY Reset */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 >; }; @@ -244,6 +283,18 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 @@ -275,48 +326,8 @@ pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */ >; }; }; }; - -&pcie { - reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; - status = "okay"; -}; - -&usbh1 { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 26b13958f663..6d137b47068a 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -36,6 +36,8 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; led0: user1 { label = "user1"; @@ -63,6 +65,8 @@ pps { compatible = "pps-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -233,39 +237,96 @@ }; }; -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; +&ldb { + status = "okay"; - imx6qdl-gw52xx { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x4001b0b0 /* MEZZ_DIO0 */ - MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x4001b0b0 /* MEZZ_DIO1 */ - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0001b0b0 /* OTG_PWR_EN */ - MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x0001b0b0 /* VIDDEC_PDN# */ - MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x0001b0b0 /* PHY Reset */ - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x0001b0b0 /* PCIE_RST# */ - MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x4001b0b0 /* GPS_PWDN */ - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x0001b0b0 /* GPS_PPS */ - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* USB_SEL_PCI */ - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x0001b0b0 /* TOUCH_IRQ# */ - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x0001b0b0 /* user1 led */ - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x0001b0b0 /* user2 led */ - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x0001b0b0 /* user3 led */ - MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x0001b0b0 /* LVDS_TCH# */ - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x0001b0b0 /* SD3_CD# */ - MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x4001b0b0 /* UART2_EN# */ - >; + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + }; }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&iomuxc { + imx6qdl-gw52xx { pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ >; }; @@ -287,6 +348,15 @@ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 /* PHY Reset */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 >; }; @@ -332,6 +402,18 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE_RST# */ + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 + >; + }; + pinctrl_pwm4: pwm4grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 @@ -362,6 +444,7 @@ pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */ >; }; @@ -373,85 +456,8 @@ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* CD */ >; }; }; }; - -&ldb { - status = "okay"; - - lvds-channel@0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&timing0>; - timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - }; - }; - }; -}; - -&pcie { - reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&pwm4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm4>; - status = "okay"; -}; - -&ssi1 { - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; - status = "okay"; -}; - -&usbh1 { - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; - vmmc-supply = <®_3p3v>; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index e6e298bb7576..cade1bdc97e9 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -37,6 +37,8 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; led0: user1 { label = "user1"; @@ -64,6 +66,8 @@ pps { compatible = "pps-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -240,41 +244,101 @@ }; }; -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; +&ldb { + status = "okay"; - imx6qdl-gw53xx { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x4001b0b0 /* PCIE6EXP_DIO0 */ - MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x4001b0b0 /* PCIE6EXP_DIO1 */ - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0001b0b0 /* OTG_PWR_EN */ - MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x4001b0b0 /* GPS_SHDN */ - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x0001b0b0 /* GPS_PPS */ - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x0001b0b0 /* PCIE IRQ */ - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x0001b0b0 /* PCIE RST */ - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ - MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ - MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* HUB_RST# */ - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x4001b0b0 /* PCIE_WDIS# */ - MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x0001b0b0 /* ACCEL_IRQ# */ - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x0001b0b0 /* user1 led */ - MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x0001b0b0 /* USBOTG_OC# */ - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x0001b0b0 /* user2 led */ - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x0001b0b0 /* user3 led */ - MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x0001b0b0 /* TOUCH_IRQ# */ - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x0001b0b0 /* SD3_DET# */ - >; + lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + }; }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; + status = "okay"; + + eth1: sky2@8 { /* MAC/PHY on bus 8 */ + compatible = "marvell,sky2"; + }; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&iomuxc { + imx6qdl-gw53xx { pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ >; }; @@ -303,6 +367,15 @@ fsl,pins = < MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 >; }; @@ -348,6 +421,19 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */ + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */ + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 + >; + }; + pinctrl_pwm4: pwm4grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 @@ -378,6 +464,8 @@ pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */ + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */ >; }; @@ -389,90 +477,8 @@ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* CD */ >; }; }; }; - -&ldb { - status = "okay"; - - lvds-channel@1 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&timing0>; - timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - }; - }; - }; -}; - -&pcie { - reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; - status = "okay"; - - eth1: sky2@8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - }; -}; - -&pwm4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm4>; - status = "okay"; -}; - -&ssi1 { - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; - status = "okay"; -}; - -&usbh1 { - vbus-supply = <®_usb_h1_vbus>; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; - vmmc-supply = <®_3p3v>; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index a366a9332509..cf13239a1619 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -37,6 +37,8 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; led0: user1 { label = "user1"; @@ -64,6 +66,8 @@ pps { compatible = "pps-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -329,35 +333,106 @@ }; }; -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; +&ldb { + status = "okay"; - imx6qdl-gw54xx { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0001b0b0 /* OTG_PWR_EN */ - MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x0001b0b0 /* SPINOR_CS0# */ - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x0001b0b0 /* GPS_PPS */ - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x0001b0b0 /* PCIE IRQ */ - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x0001b0b0 /* PCIE RST */ - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x0001b0b0 /* TOUCH_IRQ# */ - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x0001b0b0 /* user1 led */ - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x0001b0b0 /* user2 led */ - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x0001b0b0 /* user3 led */ - MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x4001b0b0 /* USBHUB_RST# */ - MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x4001b0b0 /* MIPI_DIO */ - >; + lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + }; }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; + status = "okay"; + + eth1: sky2@8 { /* MAC/PHY on bus 8 */ + compatible = "marvell,sky2"; + }; +}; +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&ssi2 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&iomuxc { + imx6qdl-gw54xx { pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ >; }; @@ -386,6 +461,15 @@ fsl,pins = < MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 >; }; @@ -431,6 +515,19 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */ + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */ + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 + >; + }; + pinctrl_pwm4: pwm4grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 @@ -461,6 +558,7 @@ pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */ >; }; @@ -476,90 +574,3 @@ }; }; }; - -&ldb { - status = "okay"; - - lvds-channel@1 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&timing0>; - timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - }; - }; - }; -}; - -&pcie { - reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; - status = "okay"; - - eth1: sky2@8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - }; -}; - -&pwm4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm4>; - status = "okay"; -}; - -&ssi1 { - status = "okay"; -}; - -&ssi2 { - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; - status = "okay"; -}; - -&usbh1 { - vbus-supply = <®_usb_h1_vbus>; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; - vmmc-supply = <®_3p3v>; - status = "okay"; -};