From: Antti Palosaari Date: Thu, 4 Aug 2011 16:26:10 +0000 (-0300) Subject: [media] rtl28xx: initial support for rtl2832u X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=b5cbaa43a676be6fe4d7e26760e5873969e69341;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git [media] rtl28xx: initial support for rtl2832u Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/dvb/dvb-usb/rtl28xxu.c b/drivers/media/dvb/dvb-usb/rtl28xxu.c index c186736ea8f7..8772fe880b34 100644 --- a/drivers/media/dvb/dvb-usb/rtl28xxu.c +++ b/drivers/media/dvb/dvb-usb/rtl28xxu.c @@ -88,8 +88,10 @@ static int rtl2831_wr_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int len) if (reg < 0x3000) req.index = CMD_USB_WR; - else + else if (reg < 0x4000) req.index = CMD_SYS_WR; + else + req.index = CMD_IR_WR; req.value = reg; req.size = len; @@ -104,8 +106,10 @@ static int rtl2831_rd_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int len) if (reg < 0x3000) req.index = CMD_USB_RD; - else + else if (reg < 0x4000) req.index = CMD_SYS_RD; + else + req.index = CMD_IR_RD; req.value = reg; req.size = len; @@ -235,18 +239,18 @@ static struct rtl2830_config rtl28xxu_rtl2830_mxl5005s_config = { .agc_targ_val = 0x3e, }; -static int rtl28xxu_frontend_attach(struct dvb_usb_adapter *adap) +static int rtl2831u_frontend_attach(struct dvb_usb_adapter *adap) { int ret; struct rtl28xxu_priv *priv = adap->dev->priv; u8 buf[1]; struct rtl2830_config *rtl2830_config; + /* open RTL2831U/RTL2830 I2C gate */ + struct rtl28xxu_req req_gate = {0x0120, 0x0011, 0x0001, "\x08"}; /* for MT2060 tuner probe */ struct rtl28xxu_req req_mt2060 = {0x00c0, CMD_I2C_RD, 1, buf}; /* for QT1010 tuner probe */ struct rtl28xxu_req req_qt1010 = {0x0fc4, CMD_I2C_RD, 1, buf}; - /* open RTL2831U/RTL2830 I2C gate */ - struct rtl28xxu_req req_gate = {0x0120, 0x0011, 0x0001, "\x08"}; deb_info("%s:\n", __func__); @@ -329,6 +333,79 @@ err: return ret; } +static int rtl2832u_frontend_attach(struct dvb_usb_adapter *adap) +{ + int ret; + struct rtl28xxu_priv *priv = adap->dev->priv; + u8 buf[1]; + /* open RTL2832U/RTL2832 I2C gate */ + struct rtl28xxu_req req_gate_open = {0x0120, 0x0011, 0x0001, "\x18"}; + /* close RTL2832U/RTL2832 I2C gate */ + struct rtl28xxu_req req_gate_close = {0x0120, 0x0011, 0x0001, "\x10"}; + /* for FC2580 tuner probe */ + struct rtl28xxu_req req_fc2580 = {0x01ac, CMD_I2C_RD, 1, buf}; + + deb_info("%s:\n", __func__); + + /* GPIO direction */ + ret = rtl2831_wr_reg(adap->dev, SYS_GPIO_DIR, 0x0a); + if (ret) + goto err; + + /* enable as output GPIO0, GPIO2, GPIO4 */ + ret = rtl2831_wr_reg(adap->dev, SYS_GPIO_OUT_EN, 0x15); + if (ret) + goto err; + + ret = rtl2831_wr_reg(adap->dev, SYS_DEMOD_CTL, 0xe8); + if (ret) + goto err; + + /* + * Probe used tuner. We need to know used tuner before demod attach + * since there is some demod params needed to set according to tuner. + */ + + /* open demod I2C gate */ + ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate_open); + if (ret) + goto err; + + /* check FC2580 ID register; reg=01 val=56 */ + ret = rtl28xxu_ctrl_msg(adap->dev, &req_fc2580); + if (ret == 0 && buf[0] == 0x56) { + priv->tuner = TUNER_RTL2832_FC2580; + deb_info("%s: FC2580\n", __func__); + goto found; + } else { + deb_info("%s: FC2580 probe failed=%d - %02x\n", + __func__, ret, buf[0]); + } + + /* close demod I2C gate */ + ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate_close); + if (ret) + goto err; + + /* tuner not found */ + ret = -ENODEV; + goto err; + +found: + /* close demod I2C gate */ + ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate_close); + if (ret) + goto err; + + /* attach demodulator */ + /* TODO: */ + + return ret; +err: + deb_info("%s: failed=%d\n", __func__, ret); + return ret; +} + static struct qt1010_config rtl28xxu_qt1010_config = { .i2c_address = 0x62, /* 0xc4 */ }; @@ -355,7 +432,7 @@ static struct mxl5005s_config rtl28xxu_mxl5005s_config = { .AgcMasterByte = 0x00, }; -static int rtl28xxu_tuner_attach(struct dvb_usb_adapter *adap) +static int rtl2831u_tuner_attach(struct dvb_usb_adapter *adap) { int ret; struct rtl28xxu_priv *priv = adap->dev->priv; @@ -395,6 +472,33 @@ err: return ret; } +static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap) +{ + int ret; + struct rtl28xxu_priv *priv = adap->dev->priv; + struct dvb_frontend *fe = NULL; + + deb_info("%s:\n", __func__); + + switch (priv->tuner) { + case TUNER_RTL2832_FC2580: + /* TODO: */ + break; + default: + err("unknown tuner=%d", priv->tuner); + } + + if (fe == NULL) { + ret = -ENODEV; + goto err; + } + + return 0; +err: + deb_info("%s: failed=%d\n", __func__, ret); + return ret; +} + static int rtl28xxu_streaming_ctrl(struct dvb_usb_adapter *adap , int onoff) { int ret; @@ -455,21 +559,14 @@ static int rtl28xxu_power_ctrl(struct dvb_usb_device *d, int onoff) sys0 = sys0 & 0x0f; sys0 |= 0xe0; } else { - -#if 0 /* keep */ /* * FIXME: Use .fe_ioctl_override() to prevent demod - * IOCTLs in case of device is powered off. - * - * For now we cannot power off device because most FE IOCTLs - * can be performed only when device is powered. - * Using IOCTLs when device is powered off will result errors - * because register access to demod fails. + * IOCTLs in case of device is powered off. Or change + * RTL2830 demod not perform requestesd IOCTL & IO when sleep. */ gpio &= (~0x01); /* GPIO0 = 0 */ gpio |= 0x10; /* GPIO4 = 1 */ sys0 = sys0 & (~0xc0); -#endif } deb_info("%s: WR SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__, sys0, gpio); @@ -490,11 +587,39 @@ err: return ret; } -static int rtl28xxu_rc_query(struct dvb_usb_device *d) +static int rtl2831u_rc_query(struct dvb_usb_device *d) { - int ret; + int ret, i; + struct rtl28xxu_priv *priv = d->priv; u8 buf[5]; u32 rc_code; + struct rtl28xxu_reg_val rc_nec_tab[] = { + { 0x3033, 0x80 }, + { 0x3020, 0x43 }, + { 0x3021, 0x16 }, + { 0x3022, 0x16 }, + { 0x3023, 0x5a }, + { 0x3024, 0x2d }, + { 0x3025, 0x16 }, + { 0x3026, 0x01 }, + { 0x3028, 0xb0 }, + { 0x3029, 0x04 }, + { 0x302c, 0x88 }, + { 0x302e, 0x13 }, + { 0x3030, 0xdf }, + { 0x3031, 0x05 }, + }; + + /* init remote controller */ + if (!priv->rc_active) { + for (i = 0; i < ARRAY_SIZE(rc_nec_tab); i++) { + ret = rtl2831_wr_reg(d, rc_nec_tab[i].reg, + rc_nec_tab[i].val); + if (ret) + goto err; + } + priv->rc_active = true; + } ret = rtl2831_rd_regs(d, SYS_IRRC_RP, buf, 5); if (ret) @@ -534,19 +659,97 @@ err: return ret; } + +static int rtl2832u_rc_query(struct dvb_usb_device *d) +{ + int ret, i; + struct rtl28xxu_priv *priv = d->priv; + u8 buf[128]; + int len; + struct rtl28xxu_reg_val rc_nec_tab[] = { + {IR_RX_CTRL, 0x20}, + {IR_RX_BUF_CTRL, 0x80}, + {IR_RX_IF, 0xff}, + {IR_RX_IE, 0xff}, + {IR_MAX_DURATION0, 0xd0}, + {IR_MAX_DURATION1, 0x07}, + {IR_IDLE_LEN0, 0xc0}, + {IR_IDLE_LEN1, 0x00}, + {IR_GLITCH_LEN, 0x03}, + {IR_RX_CLK, 0x09}, + {IR_RX_CFG, 0x1c}, + {IR_MAX_H_TOL_LEN, 0x1e}, + {IR_MAX_L_TOL_LEN, 0x1e}, + {IR_RX_CTRL, 0x80}, + }; + + /* init remote controller */ + if (!priv->rc_active) { + for (i = 0; i < ARRAY_SIZE(rc_nec_tab); i++) { + ret = rtl2831_wr_reg(d, rc_nec_tab[i].reg, + rc_nec_tab[i].val); + if (ret) + goto err; + } + priv->rc_active = true; + } + + ret = rtl2831_rd_reg(d, IR_RX_IF, &buf[0]); + if (ret) + goto err; + + if (buf[0] != 0x83) + goto exit; + + ret = rtl2831_rd_reg(d, IR_RX_BC, &buf[0]); + if (ret) + goto err; + + len = buf[0]; + ret = rtl2831_rd_regs(d, IR_RX_BUF, buf, len); + + /* TODO: pass raw IR to Kernel IR decoder */ + + ret = rtl2831_wr_reg(d, IR_RX_IF, 0x03); + ret = rtl2831_wr_reg(d, IR_RX_BUF_CTRL, 0x80); + ret = rtl2831_wr_reg(d, IR_RX_CTRL, 0x80); + +exit: + return ret; +err: + deb_info("%s: failed=%d\n", __func__, ret); + return ret; +} + + /* DVB USB Driver stuff */ #define USB_VID_REALTEK 0x0bda +#define USB_VID_DEXATEK 0x1D19 #define USB_PID_RTL2831U 0x2831 +#define USB_PID_RTL2832U 0x2832 #define USB_PID_FREECOM 0x0160 +#define USB_PID_DEXATEK_1101 0x1101 #define RTL2831U_0BDA_2831 0 #define RTL2831U_14AA_0160 1 +#define RTL2832U_1ST_ID (RTL2831U_14AA_0160 + 1) + +#define RTL2832U_0BDA_2832 (0 + RTL2832U_1ST_ID) +#define RTL2832U_1D19_1101 (1 + RTL2832U_1ST_ID) + + static struct usb_device_id rtl28xxu_table[] = { [RTL2831U_0BDA_2831] = { USB_DEVICE(USB_VID_REALTEK, USB_PID_RTL2831U)}, [RTL2831U_14AA_0160] = { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM)}, + + [RTL2832U_0BDA_2832] = { + USB_DEVICE(USB_VID_REALTEK, USB_PID_RTL2832U)}, + [RTL2832U_1D19_1101] = { + USB_DEVICE(USB_VID_DEXATEK, USB_PID_DEXATEK_1101)}, + {} /* terminating entry */ }; @@ -564,8 +767,8 @@ static struct dvb_usb_device_properties rtl28xxu_properties[] = { .num_adapters = 1, .adapter = { { - .frontend_attach = rtl28xxu_frontend_attach, - .tuner_attach = rtl28xxu_tuner_attach, + .frontend_attach = rtl2831u_frontend_attach, + .tuner_attach = rtl2831u_tuner_attach, .streaming_ctrl = rtl28xxu_streaming_ctrl, .stream = { .type = USB_BULK, @@ -585,7 +788,7 @@ static struct dvb_usb_device_properties rtl28xxu_properties[] = { .rc.core = { .protocol = RC_TYPE_NEC, .module_name = "rtl28xxu", - .rc_query = rtl28xxu_rc_query, + .rc_query = rtl2831u_rc_query, .rc_interval = 400, .allowed_protos = RC_TYPE_NEC, .rc_codes = RC_MAP_EMPTY, @@ -609,6 +812,63 @@ static struct dvb_usb_device_properties rtl28xxu_properties[] = { }, } }, + { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = DEVICE_SPECIFIC, + .no_reconnect = 1, + + .size_of_priv = sizeof(struct rtl28xxu_priv), + + .num_adapters = 1, + .adapter = { + { + .frontend_attach = rtl2832u_frontend_attach, + .tuner_attach = rtl2832u_tuner_attach, + .streaming_ctrl = rtl28xxu_streaming_ctrl, + .stream = { + .type = USB_BULK, + .count = 6, + .endpoint = 0x81, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + } + }, + + .power_ctrl = rtl28xxu_power_ctrl, + + .rc.core = { + .protocol = RC_TYPE_NEC, + .module_name = "rtl28xxu", + .rc_query = rtl2832u_rc_query, + .rc_interval = 400, + .allowed_protos = RC_TYPE_NEC, + .rc_codes = RC_MAP_EMPTY, + }, + + .i2c_algo = &rtl28xxu_i2c_algo, + + .num_device_descs = 2, + .devices = { + { + .name = "Realtek RTL2832U reference design", + .cold_ids = {NULL}, + .warm_ids = { + &rtl28xxu_table[RTL2832U_0BDA_2832], NULL}, + }, + { + .name = "Dexatek dongle", + .cold_ids = {NULL}, + .warm_ids = { + &rtl28xxu_table[RTL2832U_1D19_1101], NULL}, + }, + } + }, + }; static int rtl28xxu_probe(struct usb_interface *intf, @@ -617,22 +877,6 @@ static int rtl28xxu_probe(struct usb_interface *intf, int ret, i; int properties_count = ARRAY_SIZE(rtl28xxu_properties); struct dvb_usb_device *d = NULL; - struct rtl28xxu_reg_val rc_nec_tab[] = { - { 0x3033, 0x80 }, - { 0x3020, 0x43 }, - { 0x3021, 0x16 }, - { 0x3022, 0x16 }, - { 0x3023, 0x5a }, - { 0x3024, 0x2d }, - { 0x3025, 0x16 }, - { 0x3026, 0x01 }, - { 0x3028, 0xb0 }, - { 0x3029, 0x04 }, - { 0x302c, 0x88 }, - { 0x302e, 0x13 }, - { 0x3030, 0xdf }, - { 0x3031, 0x05 }, - }; deb_info("%s: interface=%d\n", __func__, intf->cur_altsetting->desc.bInterfaceNumber); @@ -663,13 +907,6 @@ static int rtl28xxu_probe(struct usb_interface *intf, if (ret) goto err; - /* init remote controller */ - for (i = 0; i < ARRAY_SIZE(rc_nec_tab); i++) { - ret = rtl2831_wr_reg(d, rc_nec_tab[i].reg, rc_nec_tab[i].val); - if (ret) - goto err; - } - return ret; err: deb_info("%s: failed=%d\n", __func__, ret); diff --git a/drivers/media/dvb/dvb-usb/rtl28xxu.h b/drivers/media/dvb/dvb-usb/rtl28xxu.h index 902cb8b09206..dbde378d05e6 100644 --- a/drivers/media/dvb/dvb-usb/rtl28xxu.h +++ b/drivers/media/dvb/dvb-usb/rtl28xxu.h @@ -62,10 +62,13 @@ #define CMD_SYS_WR (SYS | CMD_WR_FLAG) #define CMD_I2C_RD (I2C) #define CMD_I2C_WR (I2C | CMD_WR_FLAG) +#define CMD_IR_RD (CMD_SYS_RD | 0x01) +#define CMD_IR_WR (CMD_SYS_WR | 0x01) struct rtl28xxu_priv { u8 chip_id; u8 tuner; + bool rc_active; }; enum rtl28xxu_chip_id { @@ -76,9 +79,21 @@ enum rtl28xxu_chip_id { enum rtl28xxu_tuner { TUNER_NONE = 0, + TUNER_RTL2830_QT1010, TUNER_RTL2830_MT2060, TUNER_RTL2830_MXL5005S, + + TUNER_RTL2832_MT2266, + TUNER_RTL2832_FC2580, + TUNER_RTL2832_MT2063, + TUNER_RTL2832_MAX3543, + TUNER_RTL2832_TUA9001, + TUNER_RTL2832_MXL5007T, + TUNER_RTL2832_FC0012, + TUNER_RTL2832_E4000, + TUNER_RTL2832_TDA18272, + TUNER_RTL2832_FC0013, }; struct rtl28xxu_req { @@ -192,6 +207,8 @@ struct rtl28xxu_reg_val { #define SYS_GPIO_CFG0 0x3007 /* PAD configuration for GPIO0-GPIO3 */ #define SYS_SYS2 0x3008 /* include GP_CFG1 and 3 reserved bytes */ #define SYS_GPIO_CFG1 0x3008 /* PAD configuration for GPIO4 */ +#define SYS_DEMOD_CTL1 0x300B + /* IrDA registers */ #define SYS_IRRC_PSR 0x3020 /* IR protocol selection */ #define SYS_IRRC_PER 0x3024 /* IR protocol extension */ @@ -207,4 +224,34 @@ struct rtl28xxu_reg_val { #define SYS_I2CMSR 0x304C /* I2C master status */ #define SYS_I2CMFR 0x3050 /* I2C master FIFO */ +/* + * IR registers + */ +#define IR_RX_BUF 0xFC00 +#define IR_RX_IE 0xFD00 +#define IR_RX_IF 0xFD01 +#define IR_RX_CTRL 0xFD02 +#define IR_RX_CFG 0xFD03 +#define IR_MAX_DURATION0 0xFD04 +#define IR_MAX_DURATION1 0xFD05 +#define IR_IDLE_LEN0 0xFD06 +#define IR_IDLE_LEN1 0xFD07 +#define IR_GLITCH_LEN 0xFD08 +#define IR_RX_BUF_CTRL 0xFD09 +#define IR_RX_BUF_DATA 0xFD0A +#define IR_RX_BC 0xFD0B +#define IR_RX_CLK 0xFD0C +#define IR_RX_C_COUNT_L 0xFD0D +#define IR_RX_C_COUNT_H 0xFD0E +#define IR_SUSPEND_CTRL 0xFD10 +#define IR_ERR_TOL_CTRL 0xFD11 +#define IR_UNIT_LEN 0xFD12 +#define IR_ERR_TOL_LEN 0xFD13 +#define IR_MAX_H_TOL_LEN 0xFD14 +#define IR_MAX_L_TOL_LEN 0xFD15 +#define IR_MASK_CTRL 0xFD16 +#define IR_MASK_DATA 0xFD17 +#define IR_RES_MASK_ADDR 0xFD18 +#define IR_RES_MASK_T_LEN 0xFD19 + #endif