From: Mauro Carvalho Chehab Date: Sun, 17 Jul 2016 23:07:16 +0000 (-0300) Subject: [media] doc-rst: add documentation for si4713 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=b299357065a439ed9a26794c37f7827e30187445;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git [media] doc-rst: add documentation for si4713 Convert it to ReST and add it to the media/v4l-drivers book. Signed-off-by: Mauro Carvalho Chehab --- diff --git a/Documentation/media/v4l-drivers/si4713.rst b/Documentation/media/v4l-drivers/si4713.rst index 2ddc6b095a76..3022e7cfe9a8 100644 --- a/Documentation/media/v4l-drivers/si4713.rst +++ b/Documentation/media/v4l-drivers/si4713.rst @@ -1,11 +1,16 @@ -Driver for I2C radios for the Silicon Labs Si4713 FM Radio Transmitters +.. include:: + +The Silicon Labs Si4713 FM Radio Transmitter Driver +=================================================== + +Copyright |copy| 2009 Nokia Corporation -Copyright (c) 2009 Nokia Corporation Contact: Eduardo Valentin Information about the Device -============================ +---------------------------- + This chip is a Silicon Labs product. It is a I2C device, currently on 0x63 address. Basically, it has transmission and signal noise level measurement features. @@ -19,7 +24,8 @@ properties which can change the behavior of this chip. Users must comply with local regulations on radio frequency (RF) transmission. Device driver description -========================= +------------------------- + There are two modules to handle this device. One is a I2C device driver and the other is a platform driver. @@ -37,140 +43,148 @@ etc. But mostly of its properties will be present in the extended controls. When the v4l2 mute property is set to 1 (true), the driver will turn the chip off. Properties description -====================== +---------------------- The properties can be accessed using v4l2 extended controls. Here is an output from v4l2-ctl util: -/ # v4l2-ctl -d /dev/radio0 --all -L -Driver Info: - Driver name : radio-si4713 - Card type : Silicon Labs Si4713 Modulator - Bus info : - Driver version: 0 - Capabilities : 0x00080800 - RDS Output - Modulator -Audio output: 0 (FM Modulator Audio Out) -Frequency: 1408000 (88.000000 MHz) -Video Standard = 0x00000000 -Modulator: - Name : FM Modulator - Capabilities : 62.5 Hz stereo rds - Frequency range : 76.0 MHz - 108.0 MHz - Subchannel modulation: stereo+rds - -User Controls - - mute (bool) : default=1 value=0 - -FM Radio Modulator Controls - - rds_signal_deviation (int) : min=0 max=90000 step=10 default=200 value=200 flags=slider - rds_program_id (int) : min=0 max=65535 step=1 default=0 value=0 - rds_program_type (int) : min=0 max=31 step=1 default=0 value=0 - rds_ps_name (str) : min=0 max=96 step=8 value='si4713 ' - rds_radio_text (str) : min=0 max=384 step=32 value='' - audio_limiter_feature_enabled (bool) : default=1 value=1 - audio_limiter_release_time (int) : min=250 max=102390 step=50 default=5010 value=5010 flags=slider - audio_limiter_deviation (int) : min=0 max=90000 step=10 default=66250 value=66250 flags=slider -audio_compression_feature_enabl (bool) : default=1 value=1 - audio_compression_gain (int) : min=0 max=20 step=1 default=15 value=15 flags=slider - audio_compression_threshold (int) : min=-40 max=0 step=1 default=-40 value=-40 flags=slider - audio_compression_attack_time (int) : min=0 max=5000 step=500 default=0 value=0 flags=slider - audio_compression_release_time (int) : min=100000 max=1000000 step=100000 default=1000000 value=1000000 flags=slider - pilot_tone_feature_enabled (bool) : default=1 value=1 - pilot_tone_deviation (int) : min=0 max=90000 step=10 default=6750 value=6750 flags=slider - pilot_tone_frequency (int) : min=0 max=19000 step=1 default=19000 value=19000 flags=slider - pre_emphasis_settings (menu) : min=0 max=2 default=1 value=1 - tune_power_level (int) : min=0 max=120 step=1 default=88 value=88 flags=slider - tune_antenna_capacitor (int) : min=0 max=191 step=1 default=0 value=110 flags=slider -/ # + +.. code-block:: none + + / # v4l2-ctl -d /dev/radio0 --all -L + Driver Info: + Driver name : radio-si4713 + Card type : Silicon Labs Si4713 Modulator + Bus info : + Driver version: 0 + Capabilities : 0x00080800 + RDS Output + Modulator + Audio output: 0 (FM Modulator Audio Out) + Frequency: 1408000 (88.000000 MHz) + Video Standard = 0x00000000 + Modulator: + Name : FM Modulator + Capabilities : 62.5 Hz stereo rds + Frequency range : 76.0 MHz - 108.0 MHz + Subchannel modulation: stereo+rds + + User Controls + + mute (bool) : default=1 value=0 + + FM Radio Modulator Controls + + rds_signal_deviation (int) : min=0 max=90000 step=10 default=200 value=200 flags=slider + rds_program_id (int) : min=0 max=65535 step=1 default=0 value=0 + rds_program_type (int) : min=0 max=31 step=1 default=0 value=0 + rds_ps_name (str) : min=0 max=96 step=8 value='si4713 ' + rds_radio_text (str) : min=0 max=384 step=32 value='' + audio_limiter_feature_enabled (bool) : default=1 value=1 + audio_limiter_release_time (int) : min=250 max=102390 step=50 default=5010 value=5010 flags=slider + audio_limiter_deviation (int) : min=0 max=90000 step=10 default=66250 value=66250 flags=slider + audio_compression_feature_enabl (bool) : default=1 value=1 + audio_compression_gain (int) : min=0 max=20 step=1 default=15 value=15 flags=slider + audio_compression_threshold (int) : min=-40 max=0 step=1 default=-40 value=-40 flags=slider + audio_compression_attack_time (int) : min=0 max=5000 step=500 default=0 value=0 flags=slider + audio_compression_release_time (int) : min=100000 max=1000000 step=100000 default=1000000 value=1000000 flags=slider + pilot_tone_feature_enabled (bool) : default=1 value=1 + pilot_tone_deviation (int) : min=0 max=90000 step=10 default=6750 value=6750 flags=slider + pilot_tone_frequency (int) : min=0 max=19000 step=1 default=19000 value=19000 flags=slider + pre_emphasis_settings (menu) : min=0 max=2 default=1 value=1 + tune_power_level (int) : min=0 max=120 step=1 default=88 value=88 flags=slider + tune_antenna_capacitor (int) : min=0 max=191 step=1 default=0 value=110 flags=slider Here is a summary of them: * Pilot is an audible tone sent by the device. -pilot_frequency - Configures the frequency of the stereo pilot tone. -pilot_deviation - Configures pilot tone frequency deviation level. -pilot_enabled - Enables or disables the pilot tone feature. +- pilot_frequency - Configures the frequency of the stereo pilot tone. +- pilot_deviation - Configures pilot tone frequency deviation level. +- pilot_enabled - Enables or disables the pilot tone feature. -* The si4713 device is capable of applying audio compression to the transmitted signal. +* The si4713 device is capable of applying audio compression to the + transmitted signal. -acomp_enabled - Enables or disables the audio dynamic range control feature. -acomp_gain - Sets the gain for audio dynamic range control. -acomp_threshold - Sets the threshold level for audio dynamic range control. -acomp_attack_time - Sets the attack time for audio dynamic range control. -acomp_release_time - Sets the release time for audio dynamic range control. +- acomp_enabled - Enables or disables the audio dynamic range control feature. +- acomp_gain - Sets the gain for audio dynamic range control. +- acomp_threshold - Sets the threshold level for audio dynamic range control. +- acomp_attack_time - Sets the attack time for audio dynamic range control. +- acomp_release_time - Sets the release time for audio dynamic range control. * Limiter setups audio deviation limiter feature. Once a over deviation occurs, -it is possible to adjust the front-end gain of the audio input and always -prevent over deviation. + it is possible to adjust the front-end gain of the audio input and always + prevent over deviation. -limiter_enabled - Enables or disables the limiter feature. -limiter_deviation - Configures audio frequency deviation level. -limiter_release_time - Sets the limiter release time. +- limiter_enabled - Enables or disables the limiter feature. +- limiter_deviation - Configures audio frequency deviation level. +- limiter_release_time - Sets the limiter release time. * Tuning power -power_level - Sets the output power level for signal transmission. -antenna_capacitor - This selects the value of antenna tuning capacitor manually -or automatically if set to zero. +- power_level - Sets the output power level for signal transmission. + antenna_capacitor - This selects the value of antenna tuning capacitor + manually or automatically if set to zero. * RDS related -rds_ps_name - Sets the RDS ps name field for transmission. -rds_radio_text - Sets the RDS radio text for transmission. -rds_pi - Sets the RDS PI field for transmission. -rds_pty - Sets the RDS PTY field for transmission. +- rds_ps_name - Sets the RDS ps name field for transmission. +- rds_radio_text - Sets the RDS radio text for transmission. +- rds_pi - Sets the RDS PI field for transmission. +- rds_pty - Sets the RDS PTY field for transmission. * Region related -preemphasis - sets the preemphasis to be applied for transmission. +- preemphasis - sets the preemphasis to be applied for transmission. RNL -=== +--- This device also has an interface to measure received noise level. To do that, you should ioctl the device node. Here is an code of example: -int main (int argc, char *argv[]) -{ - struct si4713_rnl rnl; - int fd = open("/dev/radio0", O_RDWR); - int rval; +.. code-block:: none + + int main (int argc, char *argv[]) + { + struct si4713_rnl rnl; + int fd = open("/dev/radio0", O_RDWR); + int rval; - if (argc < 2) - return -EINVAL; + if (argc < 2) + return -EINVAL; - if (fd < 0) - return fd; + if (fd < 0) + return fd; - sscanf(argv[1], "%d", &rnl.frequency); + sscanf(argv[1], "%d", &rnl.frequency); - rval = ioctl(fd, SI4713_IOC_MEASURE_RNL, &rnl); - if (rval < 0) - return rval; + rval = ioctl(fd, SI4713_IOC_MEASURE_RNL, &rnl); + if (rval < 0) + return rval; - printf("received noise level: %d\n", rnl.rnl); + printf("received noise level: %d\n", rnl.rnl); - close(fd); -} + close(fd); + } The struct si4713_rnl and SI4713_IOC_MEASURE_RNL are defined under include/linux/platform_data/media/si4713.h. Stereo/Mono and RDS subchannels -=============================== +------------------------------- The device can also be configured using the available sub channels for transmission. To do that use S/G_MODULATOR ioctl and configure txsubchans properly. Refer to the V4L2 API specification for proper use of this ioctl. Testing -======= +------- Testing is usually done with v4l2-ctl utility for managing FM tuner cards. The tool can be found in v4l-dvb repository under v4l2-apps/util directory. Example for setting rds ps name: -# v4l2-ctl -d /dev/radio0 --set-ctrl=rds_ps_name="Dummy" + +.. code-block:: none + + # v4l2-ctl -d /dev/radio0 --set-ctrl=rds_ps_name="Dummy"