From: Stephen Hemminger Date: Mon, 27 Jun 2005 18:33:08 +0000 (-0700) Subject: [PATCH] skge: remove unused declarations X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=b18f2091bc9f93548ea63752278fceaeacedab20;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git [PATCH] skge: remove unused declarations Get rid of definitions for chip versions and PHY chips that this driver does not support. Signed-off-by: Stephen Hemminger --- diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 7be569d082b4..8fd7981e95a8 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -636,10 +636,6 @@ static void skge_led_on(struct skge_hw *hw, int port) xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_ON); break; - case SK_PHY_LONE: - xm_phy_write(hw, port, PHY_LONE_LED_CFG, - 0x0800); - break; default: skge_write8(hw, SK_REG(port, TX_LED_TST), LED_T_ON); skge_write32(hw, SK_REG(port, TX_LED_VAL), 100); @@ -670,10 +666,6 @@ static void skge_led_off(struct skge_hw *hw, int port) xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_OFF); break; - case SK_PHY_LONE: - xm_phy_write(hw, port, PHY_LONE_LED_CFG, - PHY_L_LC_LEDT); - break; default: skge_write32(hw, SK_REG(port, TX_LED_VAL), 0); skge_write8(hw, SK_REG(port, TX_LED_CTRL), LED_T_OFF); @@ -1202,7 +1194,7 @@ static void genesis_mac_init(struct skge_hw *hw, int port) case SK_PHY_BCOM: ctrl1 = PHY_CT_SP1000; ctrl2 = 0; - ctrl3 = PHY_SEL_TYPE; + ctrl3 = PHY_AN_CSMA; ctrl4 = PHY_B_PEC_EN_LTR; ctrl5 = PHY_B_AC_TX_TST; @@ -1624,7 +1616,7 @@ static void yukon_init(struct skge_hw *hw, int port) ctrl = 0; ct1000 = 0; - adv = PHY_SEL_TYPE; + adv = PHY_AN_CSMA; if (skge->autoneg == AUTONEG_ENABLE) { if (iscopper(hw)) { diff --git a/drivers/net/skge.h b/drivers/net/skge.h index e57a535c5c47..6f3a4b56a671 100644 --- a/drivers/net/skge.h +++ b/drivers/net/skge.h @@ -7,31 +7,6 @@ /* PCI config registers */ #define PCI_DEV_REG1 0x40 #define PCI_DEV_REG2 0x44 -#ifndef PCI_VPD -#define PCI_VPD 0x50 -#endif - -/* PCI_OUR_REG_2 32 bit Our Register 2 */ -enum { - PCI_VPD_WR_THR = 0xff<<24, /* Bit 31..24: VPD Write Threshold */ - PCI_DEV_SEL = 0x7f<<17, /* Bit 23..17: EEPROM Device Select */ - PCI_VPD_ROM_SZ = 7 <<14, /* Bit 16..14: VPD ROM Size */ - /* Bit 13..12: reserved */ - PCI_EN_DUMMY_RD = 1<<3, /* Enable Dummy Read */ - PCI_REV_DESC = 1<<2, /* Reverse Desc. Bytes */ - PCI_USEDATA64 = 1<<0, /* Use 64Bit Data bus ext */ -}; - -/* PCI_VPD_ADR_REG 16 bit VPD Address Register */ -enum { - PCI_VPD_FLAG = 1<<15, /* starts VPD rd/wr cycle */ - PCI_VPD_ADR_MSK =0x7fffL, /* Bit 14.. 0: VPD Address Mask */ - VPD_RES_ID = 0x82, - VPD_RES_READ = 0x90, - VPD_RES_WRITE = 0x81, - VPD_RES_END = 0x78, -}; - #define PCI_STATUS_ERROR_BITS (PCI_STATUS_DETECTED_PARITY | \ PCI_STATUS_SIG_SYSTEM_ERROR | \ @@ -39,7 +14,6 @@ enum { PCI_STATUS_REC_TARGET_ABORT | \ PCI_STATUS_PARITY) - enum csr_regs { B0_RAP = 0x0000, B0_CTST = 0x0004, @@ -288,14 +262,6 @@ enum { CHIP_REV_YU_LITE_A3 = 7, /* Chip Rev. for YUKON-Lite A3 */ }; -/* B2_LD_TEST 8 bit EPROM loader test register */ -enum { - LD_T_ON = 1<<3, /* Loader Test mode on */ - LD_T_OFF = 1<<2, /* Loader Test mode off */ - LD_T_STEP = 1<<1, /* Decrement FPROM addr. Counter */ - LD_START = 1<<0, /* Start loading FPROM */ -}; - /* B2_TI_CTRL 8 bit Timer control */ /* B2_IRQM_CTRL 8 bit IRQ Moderation Timer Control */ enum { @@ -313,16 +279,6 @@ enum { TIM_T_STEP = 1<<0, /* Test step */ }; -/* B28_DPT_INI 32 bit Descriptor Poll Timer Init Val */ -/* B28_DPT_VAL 32 bit Descriptor Poll Timer Curr Val */ -/* B28_DPT_CTRL 8 bit Descriptor Poll Timer Ctrl Reg */ -enum { - DPT_MSK = 0x00ffffffL, /* Bit 23.. 0: Desc Poll Timer Bits */ - - DPT_START = 1<<1, /* Start Descriptor Poll Timer */ - DPT_STOP = 1<<0, /* Stop Descriptor Poll Timer */ -}; - /* B2_GP_IO 32 bit General Purpose I/O Register */ enum { GP_DIR_9 = 1<<25, /* IO_9 direct, 0=In/1=Out */ @@ -348,30 +304,6 @@ enum { GP_IO_0 = 1<<0, /* IO_0 pin */ }; -/* Rx/Tx Path related Arbiter Test Registers */ -/* B3_MA_TO_TEST 16 bit MAC Arbiter Timeout Test Reg */ -/* B3_MA_RC_TEST 16 bit MAC Arbiter Recovery Test Reg */ -/* B3_PA_TEST 16 bit Packet Arbiter Test Register */ -/* Bit 15, 11, 7, and 3 are reserved in B3_PA_TEST */ -enum { - TX2_T_EV = 1<<15,/* TX2 Timeout/Recv Event occured */ - TX2_T_ON = 1<<14,/* TX2 Timeout/Recv Timer Test On */ - TX2_T_OFF = 1<<13,/* TX2 Timeout/Recv Timer Tst Off */ - TX2_T_STEP = 1<<12,/* TX2 Timeout/Recv Timer Step */ - TX1_T_EV = 1<<11,/* TX1 Timeout/Recv Event occured */ - TX1_T_ON = 1<<10,/* TX1 Timeout/Recv Timer Test On */ - TX1_T_OFF = 1<<9, /* TX1 Timeout/Recv Timer Tst Off */ - TX1_T_STEP = 1<<8, /* TX1 Timeout/Recv Timer Step */ - RX2_T_EV = 1<<7, /* RX2 Timeout/Recv Event occured */ - RX2_T_ON = 1<<6, /* RX2 Timeout/Recv Timer Test On */ - RX2_T_OFF = 1<<5, /* RX2 Timeout/Recv Timer Tst Off */ - RX2_T_STEP = 1<<4, /* RX2 Timeout/Recv Timer Step */ - RX1_T_EV = 1<<3, /* RX1 Timeout/Recv Event occured */ - RX1_T_ON = 1<<2, /* RX1 Timeout/Recv Timer Test On */ - RX1_T_OFF = 1<<1, /* RX1 Timeout/Recv Timer Tst Off */ - RX1_T_STEP = 1<<0, /* RX1 Timeout/Recv Timer Step */ -}; - /* Descriptor Bit Definition */ /* TxCtrl Transmit Buffer Control Field */ /* RxCtrl Receive Buffer Control Field */ @@ -428,14 +360,6 @@ enum { RI_RST_SET = 1<<0, /* Set RAM Interface Reset */ }; -/* B3_RI_TEST 8 bit RAM Iface Test Register */ -enum { - RI_T_EV = 1<<3, /* Timeout Event occured */ - RI_T_ON = 1<<2, /* Timeout Timer Test On */ - RI_T_OFF = 1<<1, /* Timeout Timer Test Off */ - RI_T_STEP = 1<<0, /* Timeout Timer Step */ -}; - /* MAC Arbiter Registers */ /* B3_MA_TO_CTRL 16 bit MAC Arbiter Timeout Ctrl Reg */ enum { @@ -452,19 +376,6 @@ enum { #define SK_PKT_TO_MAX 0xffff /* Maximum value */ #define SK_RI_TO_53 36 /* RAM interface timeout */ - -/* B3_MA_RC_CTRL 16 bit MAC Arbiter Recovery Ctrl Reg */ -enum { - MA_ENA_REC_TX2 = 1<<7, /* Enable Recovery Timer TX2 */ - MA_DIS_REC_TX2 = 1<<6, /* Disable Recovery Timer TX2 */ - MA_ENA_REC_TX1 = 1<<5, /* Enable Recovery Timer TX1 */ - MA_DIS_REC_TX1 = 1<<4, /* Disable Recovery Timer TX1 */ - MA_ENA_REC_RX2 = 1<<3, /* Enable Recovery Timer RX2 */ - MA_DIS_REC_RX2 = 1<<2, /* Disable Recovery Timer RX2 */ - MA_ENA_REC_RX1 = 1<<1, /* Enable Recovery Timer RX1 */ - MA_DIS_REC_RX1 = 1<<0, /* Disable Recovery Timer RX1 */ -}; - /* Packet Arbiter Registers */ /* B3_PA_CTRL 16 bit Packet Arbiter Ctrl Register */ enum { @@ -618,8 +529,7 @@ enum { enum { PHY_ADDR_XMAC = 0<<8, PHY_ADDR_BCOM = 1<<8, - PHY_ADDR_LONE = 3<<8, - PHY_ADDR_NAT = 0<<8, + /* GPHY address (bits 15..11 of SMI control reg) */ PHY_ADDR_MARV = 0, }; @@ -1151,54 +1061,6 @@ enum { PHY_MARV_FE_SPEC_2 = 0x1c,/* 16 bit r/w Specific Control Reg. 2 */ }; -/* Level One-PHY Registers, indirect addressed over XMAC */ -enum { - PHY_LONE_CTRL = 0x00,/* 16 bit r/w PHY Control Register */ - PHY_LONE_STAT = 0x01,/* 16 bit r/o PHY Status Register */ - PHY_LONE_ID0 = 0x02,/* 16 bit r/o PHY ID0 Register */ - PHY_LONE_ID1 = 0x03,/* 16 bit r/o PHY ID1 Register */ - PHY_LONE_AUNE_ADV = 0x04,/* 16 bit r/w Auto-Neg. Advertisement */ - PHY_LONE_AUNE_LP = 0x05,/* 16 bit r/o Link Part Ability Reg */ - PHY_LONE_AUNE_EXP = 0x06,/* 16 bit r/o Auto-Neg. Expansion Reg */ - PHY_LONE_NEPG = 0x07,/* 16 bit r/w Next Page Register */ - PHY_LONE_NEPG_LP = 0x08,/* 16 bit r/o Next Page Link Partner */ - /* Level One-specific registers */ - PHY_LONE_1000T_CTRL = 0x09,/* 16 bit r/w 1000Base-T Control Reg */ - PHY_LONE_1000T_STAT = 0x0a,/* 16 bit r/o 1000Base-T Status Reg */ - PHY_LONE_EXT_STAT = 0x0f,/* 16 bit r/o Extended Status Reg */ - PHY_LONE_PORT_CFG = 0x10,/* 16 bit r/w Port Configuration Reg*/ - PHY_LONE_Q_STAT = 0x11,/* 16 bit r/o Quick Status Reg */ - PHY_LONE_INT_ENAB = 0x12,/* 16 bit r/w Interrupt Enable Reg */ - PHY_LONE_INT_STAT = 0x13,/* 16 bit r/o Interrupt Status Reg */ - PHY_LONE_LED_CFG = 0x14,/* 16 bit r/w LED Configuration Reg */ - PHY_LONE_PORT_CTRL = 0x15,/* 16 bit r/w Port Control Reg */ - PHY_LONE_CIM = 0x16,/* 16 bit r/o CIM Reg */ -}; - -/* National-PHY Registers, indirect addressed over XMAC */ -enum { - PHY_NAT_CTRL = 0x00,/* 16 bit r/w PHY Control Register */ - PHY_NAT_STAT = 0x01,/* 16 bit r/w PHY Status Register */ - PHY_NAT_ID0 = 0x02,/* 16 bit r/o PHY ID0 Register */ - PHY_NAT_ID1 = 0x03,/* 16 bit r/o PHY ID1 Register */ - PHY_NAT_AUNE_ADV = 0x04,/* 16 bit r/w Auto-Neg. Advertisement */ - PHY_NAT_AUNE_LP = 0x05,/* 16 bit r/o Link Partner Ability Reg */ - PHY_NAT_AUNE_EXP = 0x06,/* 16 bit r/o Auto-Neg. Expansion Reg */ - PHY_NAT_NEPG = 0x07,/* 16 bit r/w Next Page Register */ - PHY_NAT_NEPG_LP = 0x08,/* 16 bit r/o Next Page Link Partner Reg */ - /* National-specific registers */ - PHY_NAT_1000T_CTRL = 0x09,/* 16 bit r/w 1000Base-T Control Reg */ - PHY_NAT_1000T_STAT = 0x0a,/* 16 bit r/o 1000Base-T Status Reg */ - PHY_NAT_EXT_STAT = 0x0f,/* 16 bit r/o Extended Status Register */ - PHY_NAT_EXT_CTRL1 = 0x10,/* 16 bit r/o Extended Control Reg1 */ - PHY_NAT_Q_STAT1 = 0x11,/* 16 bit r/o Quick Status Reg1 */ - PHY_NAT_10B_OP = 0x12,/* 16 bit r/o 10Base-T Operations Reg */ - PHY_NAT_EXT_CTRL2 = 0x13,/* 16 bit r/o Extended Control Reg1 */ - PHY_NAT_Q_STAT2 = 0x14,/* 16 bit r/o Quick Status Reg2 */ - - PHY_NAT_PHY_ADDR = 0x19,/* 16 bit r/o PHY Address Register */ -}; - enum { PHY_CT_RESET = 1<<15, /* Bit 15: (sc) clear all PHY related regs */ PHY_CT_LOOP = 1<<14, /* Bit 14: enable Loopback over PHY */ @@ -1253,8 +1115,29 @@ enum { PHY_MARV_ID1_Y2 = 0x0C91, /* Yukon-2 (PHY 88E1112) */ }; +/* Advertisement register bits */ enum { PHY_AN_NXT_PG = 1<<15, /* Bit 15: Request Next Page */ + PHY_AN_ACK = 1<<14, /* Bit 14: (ro) Acknowledge Received */ + PHY_AN_RF = 1<<13, /* Bit 13: Remote Fault Bits */ + + PHY_AN_PAUSE_ASYM = 1<<11,/* Bit 11: Try for asymmetric */ + PHY_AN_PAUSE_CAP = 1<<10, /* Bit 10: Try for pause */ + PHY_AN_100BASE4 = 1<<9, /* Bit 9: Try for 100mbps 4k packets */ + PHY_AN_100FULL = 1<<8, /* Bit 8: Try for 100mbps full-duplex */ + PHY_AN_100HALF = 1<<7, /* Bit 7: Try for 100mbps half-duplex */ + PHY_AN_10FULL = 1<<6, /* Bit 6: Try for 10mbps full-duplex */ + PHY_AN_10HALF = 1<<5, /* Bit 5: Try for 10mbps half-duplex */ + PHY_AN_CSMA = 1<<0, /* Bit 0: Only selector supported */ + PHY_AN_SEL = 0x1f, /* Bit 4..0: Selector Field, 00001=Ethernet*/ + PHY_AN_FULL = PHY_AN_100FULL | PHY_AN_10FULL | PHY_AN_CSMA, + PHY_AN_ALL = PHY_AN_10HALF | PHY_AN_10FULL | + PHY_AN_100HALF | PHY_AN_100FULL, +}; + +/* Xmac Specific */ +enum { + PHY_X_AN_NXT_PG = 1<<15, /* Bit 15: Request Next Page */ PHY_X_AN_ACK = 1<<14, /* Bit 14: (ro) Acknowledge Received */ PHY_X_AN_RFB = 3<<12,/* Bit 13..12: Remote Fault Bits */ @@ -1263,82 +1146,6 @@ enum { PHY_X_AN_FD = 1<<5, /* Bit 5: Full Duplex */ }; -enum { - PHY_B_AN_RF = 1<<13, /* Bit 13: Remote Fault */ - - PHY_B_AN_ASP = 1<<11, /* Bit 11: Asymmetric Pause */ - PHY_B_AN_PC = 1<<10, /* Bit 10: Pause Capable */ - PHY_B_AN_SEL = 0x1f, /* Bit 4..0: Selector Field, 00001=Ethernet*/ -}; - -enum { - PHY_L_AN_RF = 1<<13, /* Bit 13: Remote Fault */ - /* Bit 12: reserved */ - PHY_L_AN_ASP = 1<<11, /* Bit 11: Asymmetric Pause */ - PHY_L_AN_PC = 1<<10, /* Bit 10: Pause Capable */ - - PHY_L_AN_SEL = 0x1f, /* Bit 4..0: Selector Field, 00001=Ethernet*/ -}; - -/* PHY_NAT_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement */ -/* PHY_NAT_AUNE_LP 16 bit r/o Link Partner Ability Reg *****/ -/* PHY_AN_NXT_PG (see XMAC) Bit 15: Request Next Page */ -enum { - PHY_N_AN_RF = 1<<13, /* Bit 13: Remote Fault */ - - PHY_N_AN_100F = 1<<11, /* Bit 11: 100Base-T2 FD Support */ - PHY_N_AN_100H = 1<<10, /* Bit 10: 100Base-T2 HD Support */ - - PHY_N_AN_SEL = 0x1f, /* Bit 4..0: Selector Field, 00001=Ethernet*/ -}; - -/* field type definition for PHY_x_AN_SEL */ -enum { - PHY_SEL_TYPE = 1, /* 00001 = Ethernet */ -}; - -enum { - PHY_ANE_LP_NP = 1<<3, /* Bit 3: Link Partner can Next Page */ - PHY_ANE_LOC_NP = 1<<2, /* Bit 2: Local PHY can Next Page */ - PHY_ANE_RX_PG = 1<<1, /* Bit 1: Page Received */ -}; - -enum { - PHY_ANE_PAR_DF = 1<<4, /* Bit 4: Parallel Detection Fault */ - - PHY_ANE_LP_CAP = 1<<0, /* Bit 0: Link Partner Auto-Neg. Cap. */ -}; - -enum { - PHY_NP_MORE = 1<<15, /* Bit 15: More, Next Pages to follow */ - PHY_NP_ACK1 = 1<<14, /* Bit 14: (ro) Ack1, for receiving a message */ - PHY_NP_MSG_VAL = 1<<13, /* Bit 13: Message Page valid */ - PHY_NP_ACK2 = 1<<12, /* Bit 12: Ack2, comply with msg content */ - PHY_NP_TOG = 1<<11, /* Bit 11: Toggle Bit, ensure sync */ - PHY_NP_MSG = 0x07ff, /* Bit 10..0: Message from/to Link Partner */ -}; - -enum { - PHY_X_EX_FD = 1<<15, /* Bit 15: Device Supports Full Duplex */ - PHY_X_EX_HD = 1<<14, /* Bit 14: Device Supports Half Duplex */ -}; - -enum { - PHY_X_RS_PAUSE = 3<<7,/* Bit 8..7: selected Pause Mode */ - PHY_X_RS_HD = 1<<6, /* Bit 6: Half Duplex Mode selected */ - PHY_X_RS_FD = 1<<5, /* Bit 5: Full Duplex Mode selected */ - PHY_X_RS_ABLMIS = 1<<4, /* Bit 4: duplex or pause cap mismatch */ - PHY_X_RS_PAUMIS = 1<<3, /* Bit 3: pause capability mismatch */ -}; - -/** Remote Fault Bits (PHY_X_AN_RFB) encoding */ -enum { - X_RFB_OK = 0<<12,/* Bit 13..12 No errors, Link OK */ - X_RFB_LF = 1<<12, /* Bit 13..12 Link Failure */ - X_RFB_OFF = 2<<12,/* Bit 13..12 Offline */ - X_RFB_AN_ERR = 3<<12,/* Bit 13..12 Auto-Negotiation Error */ -}; - /* Pause Bits (PHY_X_AN_PAUSE and PHY_X_RS_PAUSE) encoding */ enum { PHY_X_P_NO_PAUSE = 0<<7,/* Bit 8..7: no Pause Mode */ @@ -1495,166 +1302,6 @@ enum { PHY_B_RES_1000HD = 6<<8,/* Bit 10..8: 1000Base-T Half Dup. */ }; -/* - * Level One-Specific - */ -/***** PHY_LONE_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/ -enum { - PHY_L_1000C_TEST = 7<<13,/* Bit 15..13: Test Modes */ - PHY_L_1000C_MSE = 1<<12, /* Bit 12: Master/Slave Enable */ - PHY_L_1000C_MSC = 1<<11, /* Bit 11: M/S Configuration */ - PHY_L_1000C_RD = 1<<10, /* Bit 10: Repeater/DTE */ - PHY_L_1000C_AFD = 1<<9, /* Bit 9: Advertise Full Duplex */ - PHY_L_1000C_AHD = 1<<8, /* Bit 8: Advertise Half Duplex */ -}; - -/***** PHY_LONE_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/ -enum { - PHY_L_1000S_MSF = 1<<15, /* Bit 15: Master/Slave Fault */ - PHY_L_1000S_MSR = 1<<14, /* Bit 14: Master/Slave Result */ - PHY_L_1000S_LRS = 1<<13, /* Bit 13: Local Receiver Status */ - PHY_L_1000S_RRS = 1<<12, /* Bit 12: Remote Receiver Status */ - PHY_L_1000S_LP_FD = 1<<11, /* Bit 11: Link Partner can FD */ - PHY_L_1000S_LP_HD = 1<<10, /* Bit 10: Link Partner can HD */ - - PHY_L_1000S_IEC = 0xff, /* Bit 7..0: Idle Error Count */ - -/***** PHY_LONE_EXT_STAT 16 bit r/o Extended Status Register *****/ - PHY_L_ES_X_FD_CAP = 1<<15, /* Bit 15: 1000Base-X FD capable */ - PHY_L_ES_X_HD_CAP = 1<<14, /* Bit 14: 1000Base-X HD capable */ - PHY_L_ES_T_FD_CAP = 1<<13, /* Bit 13: 1000Base-T FD capable */ - PHY_L_ES_T_HD_CAP = 1<<12, /* Bit 12: 1000Base-T HD capable */ -}; - -/***** PHY_LONE_PORT_CFG 16 bit r/w Port Configuration Reg *****/ -enum { - PHY_L_PC_REP_MODE = 1<<15, /* Bit 15: Repeater Mode */ - - PHY_L_PC_TX_DIS = 1<<13, /* Bit 13: Tx output Disabled */ - PHY_L_PC_BY_SCR = 1<<12, /* Bit 12: Bypass Scrambler */ - PHY_L_PC_BY_45 = 1<<11, /* Bit 11: Bypass 4B5B-Decoder */ - PHY_L_PC_JAB_DIS = 1<<10, /* Bit 10: Jabber Disabled */ - PHY_L_PC_SQE = 1<<9, /* Bit 9: Enable Heartbeat */ - PHY_L_PC_TP_LOOP = 1<<8, /* Bit 8: TP Loopback */ - PHY_L_PC_SSS = 1<<7, /* Bit 7: Smart Speed Selection */ - PHY_L_PC_FIFO_SIZE = 1<<6, /* Bit 6: FIFO Size */ - PHY_L_PC_PRE_EN = 1<<5, /* Bit 5: Preamble Enable */ - PHY_L_PC_CIM = 1<<4, /* Bit 4: Carrier Integrity Mon */ - PHY_L_PC_10_SER = 1<<3, /* Bit 3: Use Serial Output */ - PHY_L_PC_ANISOL = 1<<2, /* Bit 2: Unisolate Port */ - PHY_L_PC_TEN_BIT = 1<<1, /* Bit 1: 10bit iface mode on */ - PHY_L_PC_ALTCLOCK = 1<<0, /* Bit 0: (ro) ALTCLOCK Mode on */ -}; - -/***** PHY_LONE_Q_STAT 16 bit r/o Quick Status Reg *****/ -enum { - PHY_L_QS_D_RATE = 3<<14,/* Bit 15..14: Data Rate */ - PHY_L_QS_TX_STAT = 1<<13, /* Bit 13: Transmitting */ - PHY_L_QS_RX_STAT = 1<<12, /* Bit 12: Receiving */ - PHY_L_QS_COL_STAT = 1<<11, /* Bit 11: Collision */ - PHY_L_QS_L_STAT = 1<<10, /* Bit 10: Link is up */ - PHY_L_QS_DUP_MOD = 1<<9, /* Bit 9: Full/Half Duplex */ - PHY_L_QS_AN = 1<<8, /* Bit 8: AutoNeg is On */ - PHY_L_QS_AN_C = 1<<7, /* Bit 7: AN is Complete */ - PHY_L_QS_LLE = 7<<4,/* Bit 6..4: Line Length Estim. */ - PHY_L_QS_PAUSE = 1<<3, /* Bit 3: LP advertised Pause */ - PHY_L_QS_AS_PAUSE = 1<<2, /* Bit 2: LP adv. asym. Pause */ - PHY_L_QS_ISOLATE = 1<<1, /* Bit 1: CIM Isolated */ - PHY_L_QS_EVENT = 1<<0, /* Bit 0: Event has occurred */ -}; - -/***** PHY_LONE_INT_ENAB 16 bit r/w Interrupt Enable Reg *****/ -/***** PHY_LONE_INT_STAT 16 bit r/o Interrupt Status Reg *****/ -enum { - PHY_L_IS_AN_F = 1<<13, /* Bit 13: Auto-Negotiation fault */ - PHY_L_IS_CROSS = 1<<11, /* Bit 11: Crossover used */ - PHY_L_IS_POL = 1<<10, /* Bit 10: Polarity correct. used */ - PHY_L_IS_SS = 1<<9, /* Bit 9: Smart Speed Downgrade */ - PHY_L_IS_CFULL = 1<<8, /* Bit 8: Counter Full */ - PHY_L_IS_AN_C = 1<<7, /* Bit 7: AutoNeg Complete */ - PHY_L_IS_SPEED = 1<<6, /* Bit 6: Speed Changed */ - PHY_L_IS_DUP = 1<<5, /* Bit 5: Duplex Changed */ - PHY_L_IS_LS = 1<<4, /* Bit 4: Link Status Changed */ - PHY_L_IS_ISOL = 1<<3, /* Bit 3: Isolate Occured */ - PHY_L_IS_MDINT = 1<<2, /* Bit 2: (ro) STAT: MII Int Pending */ - PHY_L_IS_INTEN = 1<<1, /* Bit 1: ENAB: Enable IRQs */ - PHY_L_IS_FORCE = 1<<0, /* Bit 0: ENAB: Force Interrupt */ -}; - -/* int. mask */ -#define PHY_L_DEF_MSK (PHY_L_IS_LS | PHY_L_IS_ISOL | PHY_L_IS_INTEN) - -/***** PHY_LONE_LED_CFG 16 bit r/w LED Configuration Reg *****/ -enum { - PHY_L_LC_LEDC = 3<<14,/* Bit 15..14: Col/Blink/On/Off */ - PHY_L_LC_LEDR = 3<<12,/* Bit 13..12: Rx/Blink/On/Off */ - PHY_L_LC_LEDT = 3<<10,/* Bit 11..10: Tx/Blink/On/Off */ - PHY_L_LC_LEDG = 3<<8,/* Bit 9..8: Giga/Blink/On/Off */ - PHY_L_LC_LEDS = 3<<6,/* Bit 7..6: 10-100/Blink/On/Off */ - PHY_L_LC_LEDL = 3<<4,/* Bit 5..4: Link/Blink/On/Off */ - PHY_L_LC_LEDF = 3<<2,/* Bit 3..2: Duplex/Blink/On/Off */ - PHY_L_LC_PSTRECH= 1<<1, /* Bit 1: Strech LED Pulses */ - PHY_L_LC_FREQ = 1<<0, /* Bit 0: 30/100 ms */ -}; - -/***** PHY_LONE_PORT_CTRL 16 bit r/w Port Control Reg *****/ -enum { - PHY_L_PC_TX_TCLK = 1<<15, /* Bit 15: Enable TX_TCLK */ - PHY_L_PC_ALT_NP = 1<<13, /* Bit 14: Alternate Next Page */ - PHY_L_PC_GMII_ALT= 1<<12, /* Bit 13: Alternate GMII driver */ - PHY_L_PC_TEN_CRS = 1<<10, /* Bit 10: Extend CRS*/ -}; - -/***** PHY_LONE_CIM 16 bit r/o CIM Reg *****/ -enum { - PHY_L_CIM_ISOL = 0xff<<8,/* Bit 15..8: Isolate Count */ - PHY_L_CIM_FALSE_CAR = 0xff, /* Bit 7..0: False Carrier Count */ -}; - -/* - * Pause Bits (PHY_L_AN_ASP and PHY_L_AN_PC) encoding - */ -enum { - PHY_L_P_NO_PAUSE= 0<<10,/* Bit 11..10: no Pause Mode */ - PHY_L_P_SYM_MD = 1<<10, /* Bit 11..10: symmetric Pause Mode */ - PHY_L_P_ASYM_MD = 2<<10,/* Bit 11..10: asymmetric Pause Mode */ - PHY_L_P_BOTH_MD = 3<<10,/* Bit 11..10: both Pause Mode */ -}; - -/* - * National-Specific - */ -/***** PHY_NAT_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/ -enum { - PHY_N_1000C_TEST= 7<<13,/* Bit 15..13: Test Modes */ - PHY_N_1000C_MSE = 1<<12, /* Bit 12: Master/Slave Enable */ - PHY_N_1000C_MSC = 1<<11, /* Bit 11: M/S Configuration */ - PHY_N_1000C_RD = 1<<10, /* Bit 10: Repeater/DTE */ - PHY_N_1000C_AFD = 1<<9, /* Bit 9: Advertise Full Duplex */ - PHY_N_1000C_AHD = 1<<8, /* Bit 8: Advertise Half Duplex */ - PHY_N_1000C_APC = 1<<7, /* Bit 7: Asymmetric Pause Cap. */}; - - -/***** PHY_NAT_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/ -enum { - PHY_N_1000S_MSF = 1<<15, /* Bit 15: Master/Slave Fault */ - PHY_N_1000S_MSR = 1<<14, /* Bit 14: Master/Slave Result */ - PHY_N_1000S_LRS = 1<<13, /* Bit 13: Local Receiver Status */ - PHY_N_1000S_RRS = 1<<12, /* Bit 12: Remote Receiver Status*/ - PHY_N_1000S_LP_FD= 1<<11, /* Bit 11: Link Partner can FD */ - PHY_N_1000S_LP_HD= 1<<10, /* Bit 10: Link Partner can HD */ - PHY_N_1000C_LP_APC= 1<<9, /* Bit 9: LP Asym. Pause Cap. */ - PHY_N_1000S_IEC = 0xff, /* Bit 7..0: Idle Error Count */ -}; - -/***** PHY_NAT_EXT_STAT 16 bit r/o Extended Status Register *****/ -enum { - PHY_N_ES_X_FD_CAP= 1<<15, /* Bit 15: 1000Base-X FD capable */ - PHY_N_ES_X_HD_CAP= 1<<14, /* Bit 14: 1000Base-X HD capable */ - PHY_N_ES_T_FD_CAP= 1<<13, /* Bit 13: 1000Base-T FD capable */ - PHY_N_ES_T_HD_CAP= 1<<12, /* Bit 12: 1000Base-T HD capable */ -}; - /** Marvell-Specific */ enum { PHY_M_AN_NXT_PG = 1<<15, /* Request Next Page */ @@ -2540,10 +2187,6 @@ enum { }; -/* XM_PHY_ADDR 16 bit r/w PHY Address Register */ -#define XM_PHY_ADDR_SZ 0x1f /* Bit 4..0: PHY Address bits */ - - /* XM_GP_PORT 32 bit r/w General Purpose Port Register */ enum { XM_GP_ANIP = 1<<6, /* Bit 6: (ro) Auto-Neg. in progress */ @@ -2855,7 +2498,6 @@ struct skge_port { static inline u32 skge_read32(const struct skge_hw *hw, int reg) { return readl(hw->regs + reg); - } static inline u16 skge_read16(const struct skge_hw *hw, int reg)