From: Alessandro Rubini Date: Fri, 5 Mar 2010 11:38:51 +0000 (+0100) Subject: ARM: 5978/1: plat-nomadik: use one-shot clock events X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=b102c01faed5e0083a4e6d29a2d61f6b57716e94;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git ARM: 5978/1: plat-nomadik: use one-shot clock events This is a complete rewrite of the MTU driver, using one-shot for events and a free-running timer for stamping. It allows CONFIG_NO_HZ and CONFIG_HIGH_RES_TIMERS to work on Nomadik and Ux500. Signed-off-by: Alessandro Rubini Acked-by: Linus Walleij Acked-by: Andrea Gallo Signed-off-by: Russell King --- diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c index fa7cb3a57cbf..db67402518a6 100644 --- a/arch/arm/plat-nomadik/timer.c +++ b/arch/arm/plat-nomadik/timer.c @@ -2,7 +2,7 @@ * linux/arch/arm/mach-nomadik/timer.c * * Copyright (C) 2008 STMicroelectronics - * Copyright (C) 2009 Alessandro Rubini, somewhat based on at91sam926x + * Copyright (C) 2010 Alessandro Rubini * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2, as @@ -18,123 +18,124 @@ #include -static u32 nmdk_count; /* accumulated count */ -static u32 nmdk_cycle; /* write-once */ +void __iomem *mtu_base; /* ssigned by machine code */ -/* setup by the platform code */ -void __iomem *mtu_base; - -/* - * clocksource: the MTU device is a decrementing counters, so we negate - * the value being read. - */ +/* clocksource: MTU decrements, so we negate the value being read. */ static cycle_t nmdk_read_timer(struct clocksource *cs) { - u32 count = readl(mtu_base + MTU_VAL(0)); - return nmdk_count + nmdk_cycle - count; - + return -readl(mtu_base + MTU_VAL(0)); } static struct clocksource nmdk_clksrc = { .name = "mtu_0", - .rating = 120, + .rating = 200, .read = nmdk_read_timer, + .mask = CLOCKSOURCE_MASK(32), .shift = 20, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -/* - * Clockevent device: currently only periodic mode is supported - */ +/* Clockevent device: use one-shot mode */ static void nmdk_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev) { + u32 cr; + switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - /* count current value? */ - writel(readl(mtu_base + MTU_IMSC) | 1, mtu_base + MTU_IMSC); + pr_err("%s: periodic mode not supported\n", __func__); break; case CLOCK_EVT_MODE_ONESHOT: - BUG(); /* Not supported, yet */ - /* FALLTHROUGH */ + /* Load highest value, enable device, enable interrupts */ + cr = readl(mtu_base + MTU_CR(1)); + writel(0, mtu_base + MTU_LR(1)); + writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(1)); + writel(0x2, mtu_base + MTU_IMSC); + break; case CLOCK_EVT_MODE_SHUTDOWN: case CLOCK_EVT_MODE_UNUSED: - writel(readl(mtu_base + MTU_IMSC) & ~1, mtu_base + MTU_IMSC); + /* disable irq */ + writel(0, mtu_base + MTU_IMSC); break; case CLOCK_EVT_MODE_RESUME: break; } } +static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev) +{ + /* writing the value has immediate effect */ + writel(evt, mtu_base + MTU_LR(1)); + return 0; +} + static struct clock_event_device nmdk_clkevt = { - .name = "mtu_0", - .features = CLOCK_EVT_FEAT_PERIODIC, + .name = "mtu_1", + .features = CLOCK_EVT_FEAT_ONESHOT, .shift = 32, - .rating = 100, + .rating = 200, .set_mode = nmdk_clkevt_mode, + .set_next_event = nmdk_clkevt_next, }; /* - * IRQ Handler for the timer 0 of the MTU block. The irq is not shared - * as we are the only users of mtu0 by now. + * IRQ Handler for timer 1 of the MTU block. */ static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id) { - /* ack: "interrupt clear register" */ - writel(1 << 0, mtu_base + MTU_ICR); - - /* we can't count lost ticks, unfortunately */ - nmdk_count += nmdk_cycle; - nmdk_clkevt.event_handler(&nmdk_clkevt); + struct clock_event_device *evdev = dev_id; + writel(1 << 1, mtu_base + MTU_ICR); /* Interrupt clear reg */ + evdev->event_handler(evdev); return IRQ_HANDLED; } -/* - * Set up timer interrupt, and return the current time in seconds. - */ static struct irqaction nmdk_timer_irq = { .name = "Nomadik Timer Tick", .flags = IRQF_DISABLED | IRQF_TIMER, .handler = nmdk_timer_interrupt, + .dev_id = &nmdk_clkevt, }; -static void nmdk_timer_reset(void) -{ - u32 cr; - - writel(0, mtu_base + MTU_CR(0)); /* off */ - - /* configure load and background-load, and fire it up */ - writel(nmdk_cycle, mtu_base + MTU_LR(0)); - writel(nmdk_cycle, mtu_base + MTU_BGLR(0)); - cr = MTU_CRn_PERIODIC | MTU_CRn_PRESCALE_1 | MTU_CRn_32BITS; - writel(cr, mtu_base + MTU_CR(0)); - writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0)); -} - void __init nmdk_timer_init(void) { unsigned long rate; - int bits; - - rate = CLOCK_TICK_RATE; /* 2.4MHz */ - nmdk_cycle = (rate + HZ/2) / HZ; + u32 cr = MTU_CRn_32BITS;; + + /* + * Tick rate is 2.4MHz for Nomadik and 110MHz for ux500: + * use a divide-by-16 counter if it's more than 16MHz + */ + rate = CLOCK_TICK_RATE; + if (rate > 16 << 20) { + rate /= 16; + cr |= MTU_CRn_PRESCALE_16; + } else { + cr |= MTU_CRn_PRESCALE_1; + } - /* Init the timer and register clocksource */ - nmdk_timer_reset(); + /* Timer 0 is the free running clocksource */ + writel(cr, mtu_base + MTU_CR(0)); + writel(0, mtu_base + MTU_LR(0)); + writel(0, mtu_base + MTU_BGLR(0)); + writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0)); nmdk_clksrc.mult = clocksource_hz2mult(rate, nmdk_clksrc.shift); - bits = 8*sizeof(nmdk_count); - nmdk_clksrc.mask = CLOCKSOURCE_MASK(bits); if (clocksource_register(&nmdk_clksrc)) - printk(KERN_ERR "timer: failed to initialize clock " - "source %s\n", nmdk_clksrc.name); + pr_err("timer: failed to initialize clock source %s\n", + nmdk_clksrc.name); + + /* Timer 1 is used for events, fix according to rate */ + writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */ + nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift); + nmdk_clkevt.max_delta_ns = + clockevent_delta2ns(0xffffffff, &nmdk_clkevt); + nmdk_clkevt.min_delta_ns = + clockevent_delta2ns(0x00000002, &nmdk_clkevt); + nmdk_clkevt.cpumask = cpumask_of(0); /* Register irq and clockevents */ setup_irq(IRQ_MTU0, &nmdk_timer_irq); - nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift); - nmdk_clkevt.cpumask = cpumask_of(0); clockevents_register_device(&nmdk_clkevt); }