From: Ben Greear Date: Sat, 11 Feb 2012 15:40:11 +0000 (+0000) Subject: e1000: Support RX-FCS flag. X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=b0d1562c820ae0f9ffe4d21f43676f1466ccaec2;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git e1000: Support RX-FCS flag. This allows the NIC to pass the Ethernet Frame Checksum (FCS) up the stack. Useful when sniffing packets. Signed-off-by: Ben Greear Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c index bd1d28f4cc9a..8aa8097558f9 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_main.c +++ b/drivers/net/ethernet/intel/e1000/e1000_main.c @@ -1071,6 +1071,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, netdev->features |= netdev->hw_features; netdev->hw_features |= NETIF_F_RXCSUM; + netdev->hw_features |= NETIF_F_RXFCS; if (pci_using_dac) { netdev->features |= NETIF_F_HIGHDMA; @@ -4137,10 +4138,9 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter, ((u32)(rx_desc->errors) << 24), le16_to_cpu(rx_desc->csum), skb); - pskb_trim(skb, skb->len - 4); - - /* probably a little skewed due to removing CRC */ - total_rx_bytes += skb->len; + total_rx_bytes += (skb->len - 4); /* don't count FCS */ + if (likely(!(netdev->features & NETIF_F_RXFCS))) + pskb_trim(skb, skb->len - 4); total_rx_packets++; /* eth type trans needs skb->data to point to something */ @@ -4294,14 +4294,15 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, } } - /* adjust length to remove Ethernet CRC, this must be - * done after the TBI_ACCEPT workaround above */ - length -= 4; - - /* probably a little skewed due to removing CRC */ - total_rx_bytes += length; + total_rx_bytes += (length - 4); /* don't count FCS */ total_rx_packets++; + if (likely(!(netdev->features & NETIF_F_RXFCS))) + /* adjust length to remove Ethernet CRC, this must be + * done after the TBI_ACCEPT workaround above + */ + length -= 4; + e1000_check_copybreak(netdev, buffer_info, length, &skb); skb_put(skb, length);