From: Michal Simek Date: Tue, 5 May 2015 09:26:05 +0000 (+0200) Subject: net: axienet: Fix kernel-doc warnings X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=b0d081c524b46c25d71b16a1101e8c80d6e8c86a;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git net: axienet: Fix kernel-doc warnings This patch remove kernel-doc warnings. Signed-off-by: Michal Simek Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h index 2aa6857f930e..7cb9abac95c8 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet.h +++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h @@ -411,6 +411,10 @@ struct axidma_bd { * supported, the maximum frame size would be 9k. Else it is * 1522 bytes (assuming support for basic VLAN) * @rxmem: Stores rx memory size for jumbo frame handling. + * @csum_offload_on_tx_path: Stores the checksum selection on TX side. + * @csum_offload_on_rx_path: Stores the checksum selection on RX side. + * @coalesce_count_rx: Store the irq coalesce on RX side. + * @coalesce_count_tx: Store the irq coalesce on TX side. */ struct axienet_local { struct net_device *ndev; @@ -474,7 +478,7 @@ struct axienet_option { * @lp: Pointer to axienet local structure * @offset: Address offset from the base address of Axi Ethernet core * - * returns: The contents of the Axi Ethernet register + * Return: The contents of the Axi Ethernet register * * This function returns the contents of the corresponding register. */ diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index 1781265e3dc3..4208dd7ef101 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -117,7 +117,7 @@ static struct axienet_option axienet_options[] = { * @lp: Pointer to axienet local structure * @reg: Address offset from the base address of the Axi DMA core * - * returns: The contents of the Axi DMA register + * Return: The contents of the Axi DMA register * * This function returns the contents of the corresponding Axi DMA register. */ @@ -179,8 +179,7 @@ static void axienet_dma_bd_release(struct net_device *ndev) * axienet_dma_bd_init - Setup buffer descriptor rings for Axi DMA * @ndev: Pointer to the net_device structure * - * returns: 0, on success - * -ENOMEM, on failure + * Return: 0, on success -ENOMEM, on failure * * This function is called to initialize the Rx and Tx DMA descriptor * rings. This initializes the descriptors with required default values @@ -320,7 +319,7 @@ static void axienet_set_mac_address(struct net_device *ndev, void *address) * @ndev: Pointer to the net_device structure * @p: 6 byte Address to be written as MAC address * - * returns: 0 for all conditions. Presently, there is no failure case. + * Return: 0 for all conditions. Presently, there is no failure case. * * This function is called to initialize the MAC address of the Axi Ethernet * core. It calls the core specific axienet_set_mac_address. This is the @@ -622,7 +621,7 @@ static void axienet_start_xmit_done(struct net_device *ndev) * @lp: Pointer to the axienet_local structure * @num_frag: The number of BDs to check for * - * returns: 0, on success + * Return: 0, on success * NETDEV_TX_BUSY, if any of the descriptors are not free * * This function is invoked before BDs are allocated and transmission starts. @@ -645,7 +644,7 @@ static inline int axienet_check_tx_bd_space(struct axienet_local *lp, * @skb: sk_buff pointer that contains data to be Txed. * @ndev: Pointer to net_device structure. * - * returns: NETDEV_TX_OK, on success + * Return: NETDEV_TX_OK, on success * NETDEV_TX_BUSY, if any of the descriptors are not free * * This function is invoked from upper layers to initiate transmission. The @@ -800,7 +799,7 @@ static void axienet_recv(struct net_device *ndev) * @irq: irq number * @_ndev: net_device pointer * - * returns: IRQ_HANDLED for all cases. + * Return: IRQ_HANDLED for all cases. * * This is the Axi DMA Tx done Isr. It invokes "axienet_start_xmit_done" * to complete the BD processing. @@ -849,7 +848,7 @@ out: * @irq: irq number * @_ndev: net_device pointer * - * returns: IRQ_HANDLED for all cases. + * Return: IRQ_HANDLED for all cases. * * This is the Axi DMA Rx Isr. It invokes "axienet_recv" to complete the BD * processing. @@ -899,7 +898,7 @@ static void axienet_dma_err_handler(unsigned long data); * axienet_open - Driver open routine. * @ndev: Pointer to net_device structure * - * returns: 0, on success. + * Return: 0, on success. * -ENODEV, if PHY cannot be connected to * non-zero error value on failure * @@ -980,7 +979,7 @@ err_tx_irq: * axienet_stop - Driver stop routine. * @ndev: Pointer to net_device structure * - * returns: 0, on success. + * Return: 0, on success. * * This is the driver stop routine. It calls phy_disconnect to stop the PHY * device. It also removes the interrupt handlers and disables the interrupts. @@ -1020,7 +1019,7 @@ static int axienet_stop(struct net_device *ndev) * @ndev: Pointer to net_device structure * @new_mtu: New mtu value to be applied * - * returns: Always returns 0 (success). + * Return: Always returns 0 (success). * * This is the change mtu driver routine. It checks if the Axi Ethernet * hardware supports jumbo frames before changing the mtu. This can be @@ -1087,6 +1086,8 @@ static const struct net_device_ops axienet_netdev_ops = { * not be found, the function returns -ENODEV. This function calls the * relevant PHY ethtool API to get the PHY settings. * Issue "ethtool ethX" under linux prompt to execute this function. + * + * Return: 0 on success, -ENODEV if PHY doesn't exist */ static int axienet_ethtools_get_settings(struct net_device *ndev, struct ethtool_cmd *ecmd) @@ -1108,6 +1109,8 @@ static int axienet_ethtools_get_settings(struct net_device *ndev, * relevant PHY ethtool API to set the PHY. * Issue e.g. "ethtool -s ethX speed 1000" under linux prompt to execute this * function. + * + * Return: 0 on success, -ENODEV if PHY doesn't exist */ static int axienet_ethtools_set_settings(struct net_device *ndev, struct ethtool_cmd *ecmd) @@ -1142,6 +1145,8 @@ static void axienet_ethtools_get_drvinfo(struct net_device *ndev, * * This implements ethtool command for getting the total register length * information. + * + * Return: the total regs length */ static int axienet_ethtools_get_regs_len(struct net_device *ndev) { @@ -1228,11 +1233,13 @@ axienet_ethtools_get_pauseparam(struct net_device *ndev, * axienet_ethtools_set_pauseparam - Set device pause parameter(flow control) * settings. * @ndev: Pointer to net_device structure - * @epauseparam:Pointer to ethtool_pauseparam structure + * @epauseparm:Pointer to ethtool_pauseparam structure * * This implements ethtool command for enabling flow control on Rx and Tx * paths. Issue "ethtool -A ethX tx on|off" under linux prompt to execute this * function. + * + * Return: 0 on success, -EFAULT if device is running */ static int axienet_ethtools_set_pauseparam(struct net_device *ndev, @@ -1269,6 +1276,8 @@ axienet_ethtools_set_pauseparam(struct net_device *ndev, * This implements ethtool command for getting the DMA interrupt coalescing * count on Tx and Rx paths. Issue "ethtool -c ethX" under linux prompt to * execute this function. + * + * Return: 0 always */ static int axienet_ethtools_get_coalesce(struct net_device *ndev, struct ethtool_coalesce *ecoalesce) @@ -1292,6 +1301,8 @@ static int axienet_ethtools_get_coalesce(struct net_device *ndev, * This implements ethtool command for setting the DMA interrupt coalescing * count on Tx and Rx paths. Issue "ethtool -C ethX rx-frames 5" under linux * prompt to execute this function. + * + * Return: 0, on success, Non-zero error value on failure. */ static int axienet_ethtools_set_coalesce(struct net_device *ndev, struct ethtool_coalesce *ecoalesce) @@ -1481,9 +1492,8 @@ static void axienet_dma_err_handler(unsigned long data) /** * axienet_probe - Axi Ethernet probe function. * @pdev: Pointer to platform device structure. - * @match: Pointer to device id structure * - * returns: 0, on success + * Return: 0, on success * Non-zero error value on failure. * * This is the probe routine for Axi Ethernet driver. This is called before diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c index 315136db37c9..2a5a16834c01 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c @@ -37,7 +37,7 @@ int axienet_mdio_wait_until_ready(struct axienet_local *lp) * @phy_id: Address of the PHY device * @reg: PHY register to read * - * returns: The register contents on success, -ETIMEDOUT on a timeout + * Return: The register contents on success, -ETIMEDOUT on a timeout * * Reads the contents of the requested register from the requested PHY * address by first writing the details into MCR register. After a while @@ -80,7 +80,7 @@ static int axienet_mdio_read(struct mii_bus *bus, int phy_id, int reg) * @reg: PHY register to write to * @val: Value to be written into the register * - * returns: 0 on success, -ETIMEDOUT on a timeout + * Return: 0 on success, -ETIMEDOUT on a timeout * * Writes the value to the requested register by first writing the value * into MWD register. The the MCR register is then appropriately setup @@ -119,7 +119,7 @@ static int axienet_mdio_write(struct mii_bus *bus, int phy_id, int reg, * @lp: Pointer to axienet local data structure. * @np: Pointer to device node * - * returns: 0 on success, -ETIMEDOUT on a timeout, -ENOMEM when + * Return: 0 on success, -ETIMEDOUT on a timeout, -ENOMEM when * mdiobus_alloc (to allocate memory for mii bus structure) fails. * * Sets up the MDIO interface by initializing the MDIO clock and enabling the