From: Michael Buesch Date: Mon, 19 May 2008 21:51:37 +0000 (+0200) Subject: b43: Add panic reason code that doesn't trigger restart X-Git-Tag: MMI-PSA29.97-13-9~33552^2~338^2~72 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=afa83e239af58a93eddd10a7a43ac5618884db15;p=GitHub%2FMotorolaMobilityLLC%2Fkernel-slsi.git b43: Add panic reason code that doesn't trigger restart Add a firmware panic reason code that doesn't trigger a restart. This is useful for firmware debugging and avoiding endless restart loops. We can use FWPANIC_DIE to halt the firmware at a well defined point. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index f588dfa9c1d4..f0041750355d 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -422,12 +422,21 @@ enum { B43_IRQ_RFKILL | \ B43_IRQ_TX_OK) +/* The firmware register to fetch the debug-IRQ reason from. */ +#define B43_DEBUGIRQ_REASON_REG 63 /* Debug-IRQ reasons. */ #define B43_DEBUGIRQ_PANIC 0 /* The firmware panic'ed */ #define B43_DEBUGIRQ_DUMP_SHM 1 /* Dump shared SHM */ #define B43_DEBUGIRQ_DUMP_REGS 2 /* Dump the microcode registers */ #define B43_DEBUGIRQ_ACK 0xFFFF /* The host writes that to ACK the IRQ */ +/* The firmware register to fetch the panic reason from. */ +#define B43_FWPANIC_REASON_REG 3 +/* Firmware panic reason codes */ +#define B43_FWPANIC_DIE 0 /* Firmware died. Don't auto-restart it. */ +#define B43_FWPANIC_RESTART 1 /* Firmware died. Schedule a controller reset. */ + + /* Device specific rate values. * The actual values defined here are (rate_in_mbps * 2). * Some code depends on this. Don't change it. */ diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 6011747bb3b9..e1dfb4074676 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -1662,6 +1662,30 @@ static void b43_set_beacon_int(struct b43_wldev *dev, u16 beacon_int) b43dbg(dev->wl, "Set beacon interval to %u\n", beacon_int); } +static void b43_handle_firmware_panic(struct b43_wldev *dev) +{ + u16 reason; + + /* Read the register that contains the reason code for the panic. */ + reason = b43_shm_read16(dev, B43_SHM_SCRATCH, B43_FWPANIC_REASON_REG); + b43err(dev->wl, "Whoopsy, firmware panic! Reason: %u\n", reason); + + switch (reason) { + default: + b43dbg(dev->wl, "The panic reason is unknown.\n"); + /* fallthrough */ + case B43_FWPANIC_DIE: + /* Do not restart the controller or firmware. + * The device is nonfunctional from now on. + * Restarting would result in this panic to trigger again, + * so we avoid that recursion. */ + break; + case B43_FWPANIC_RESTART: + b43_controller_restart(dev, "Microcode panic"); + break; + } +} + static void handle_irq_ucode_debug(struct b43_wldev *dev) { unsigned int i, cnt; @@ -1672,15 +1696,12 @@ static void handle_irq_ucode_debug(struct b43_wldev *dev) if (!dev->fw.opensource) return; - /* Microcode register 63 contains the debug-IRQ reason. */ - reason = b43_shm_read16(dev, B43_SHM_SCRATCH, 63); + /* Read the register that contains the reason code for this IRQ. */ + reason = b43_shm_read16(dev, B43_SHM_SCRATCH, B43_DEBUGIRQ_REASON_REG); + switch (reason) { case B43_DEBUGIRQ_PANIC: - /* The reason for the panic is in register 3. */ - reason = b43_shm_read16(dev, B43_SHM_SCRATCH, 3); - b43err(dev->wl, "Whoopsy, the microcode panic'ed! Reason: %u\n", - reason); - b43_controller_restart(dev, "Microcode panic"); + b43_handle_firmware_panic(dev); break; case B43_DEBUGIRQ_DUMP_SHM: if (!B43_DEBUG) @@ -1721,7 +1742,9 @@ static void handle_irq_ucode_debug(struct b43_wldev *dev) reason); } out: - b43_shm_write16(dev, B43_SHM_SCRATCH, 63, B43_DEBUGIRQ_ACK); + /* Acknowledge the debug-IRQ, so the firmware can continue. */ + b43_shm_write16(dev, B43_SHM_SCRATCH, + B43_DEBUGIRQ_REASON_REG, B43_DEBUGIRQ_ACK); } /* Interrupt handler bottom-half */