From: David Lechner Date: Mon, 7 Aug 2017 17:39:38 +0000 (-0500) Subject: dt-bindings: add binding for Sitronix ST7586 display panels X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=aee02b0fc0258c67941ddfe95fb68d80b54ad4ad;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git dt-bindings: add binding for Sitronix ST7586 display panels This adds a new binding for Sitronix ST7586 display panels. Using lego as the vendor prefix in the compatible string because the display panel I am working with is an integral part of the LEGO MINDSTORMS EV3. Signed-off-by: David Lechner Acked-by: Rob Herring Signed-off-by: Noralf Trønnes Link: https://patchwork.freedesktop.org/patch/msgid/1502127581-10517-3-git-send-email-david@lechnology.com --- diff --git a/Documentation/devicetree/bindings/display/sitronix,st7586.txt b/Documentation/devicetree/bindings/display/sitronix,st7586.txt new file mode 100644 index 000000000000..1d0dad1210d3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/sitronix,st7586.txt @@ -0,0 +1,22 @@ +Sitronix ST7586 display panel + +Required properties: +- compatible: "lego,ev3-lcd". +- a0-gpios: The A0 signal (since this binding is for serial mode, this is + the pin labeled D1 on the controller, not the pin labeled A0) +- reset-gpios: Reset pin + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in ../spi/spi-bus.txt must be specified. + +Optional properties: +- rotation: panel rotation in degrees counter clockwise (0,90,180,270) + +Example: + display@0{ + compatible = "lego,ev3-lcd"; + reg = <0>; + spi-max-frequency = <10000000>; + a0-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>; + };