From: Ard Biesheuvel Date: Tue, 16 Aug 2016 19:02:32 +0000 (+0200) Subject: arm64: head.S: get rid of x25 and x26 with 'global' scope X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=aea73abb90265110ed59281e370289316fd689f3;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git arm64: head.S: get rid of x25 and x26 with 'global' scope Currently, x25 and x26 hold the physical addresses of idmap_pg_dir and swapper_pg_dir, respectively, when running early boot code. But having registers with 'global' scope in files that contain different sections with different lifetimes, and that are called by different CPUs at different times is a bit messy, especially since stashing the values does not buy us anything in terms of code size or clarity. So simply replace each reference to x25 or x26 with an adrp instruction referring to idmap_pg_dir or swapper_pg_dir directly. Acked-by: Mark Rutland Signed-off-by: Ard Biesheuvel Signed-off-by: Will Deacon --- diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S index b77f58355da1..219676253dbc 100644 --- a/arch/arm64/kernel/head.S +++ b/arch/arm64/kernel/head.S @@ -214,7 +214,7 @@ ENTRY(stext) adrp x24, __PHYS_OFFSET and x23, x24, MIN_KIMG_ALIGN - 1 // KASLR offset, defaults to 0 bl set_cpu_boot_mode_flag - bl __create_page_tables // x25=TTBR0, x26=TTBR1 + bl __create_page_tables /* * The following calls CPU setup code, see arch/arm64/mm/proc.S for * details. @@ -311,23 +311,21 @@ ENDPROC(preserve_boot_args) * been enabled */ __create_page_tables: - adrp x25, idmap_pg_dir - adrp x26, swapper_pg_dir mov x28, lr /* * Invalidate the idmap and swapper page tables to avoid potential * dirty cache lines being evicted. */ - mov x0, x25 - add x1, x26, #SWAPPER_DIR_SIZE + adrp x0, idmap_pg_dir + adrp x1, swapper_pg_dir + SWAPPER_DIR_SIZE bl __inval_cache_range /* * Clear the idmap and swapper page tables. */ - mov x0, x25 - add x6, x26, #SWAPPER_DIR_SIZE + adrp x0, idmap_pg_dir + adrp x6, swapper_pg_dir + SWAPPER_DIR_SIZE 1: stp xzr, xzr, [x0], #16 stp xzr, xzr, [x0], #16 stp xzr, xzr, [x0], #16 @@ -340,7 +338,7 @@ __create_page_tables: /* * Create the identity mapping. */ - mov x0, x25 // idmap_pg_dir + adrp x0, idmap_pg_dir adrp x3, __idmap_text_start // __pa(__idmap_text_start) #ifndef CONFIG_ARM64_VA_BITS_48 @@ -390,7 +388,7 @@ __create_page_tables: /* * Map the kernel image (starting with PHYS_OFFSET). */ - mov x0, x26 // swapper_pg_dir + adrp x0, swapper_pg_dir mov_q x5, KIMAGE_VADDR + TEXT_OFFSET // compile time __va(_text) add x5, x5, x23 // add KASLR displacement create_pgd_entry x0, x5, x3, x6 @@ -405,8 +403,8 @@ __create_page_tables: * accesses (MMU disabled), invalidate the idmap and swapper page * tables again to remove any speculatively loaded cache lines. */ - mov x0, x25 - add x1, x26, #SWAPPER_DIR_SIZE + adrp x0, idmap_pg_dir + adrp x1, swapper_pg_dir + SWAPPER_DIR_SIZE dmb sy bl __inval_cache_range @@ -666,8 +664,6 @@ secondary_startup: /* * Common entry point for secondary CPUs. */ - adrp x25, idmap_pg_dir - adrp x26, swapper_pg_dir bl __cpu_setup // initialise processor adr_l x27, __secondary_switch // address to jump to after enabling the MMU @@ -731,8 +727,10 @@ ENTRY(__enable_mmu) cmp x2, #ID_AA64MMFR0_TGRAN_SUPPORTED b.ne __no_granule_support update_early_cpu_boot_status 0, x1, x2 - msr ttbr0_el1, x25 // load TTBR0 - msr ttbr1_el1, x26 // load TTBR1 + adrp x1, idmap_pg_dir + adrp x2, swapper_pg_dir + msr ttbr0_el1, x1 // load TTBR0 + msr ttbr1_el1, x2 // load TTBR1 isb msr sctlr_el1, x0 isb diff --git a/arch/arm64/kernel/sleep.S b/arch/arm64/kernel/sleep.S index ccf79d849e0a..182129b60fdf 100644 --- a/arch/arm64/kernel/sleep.S +++ b/arch/arm64/kernel/sleep.S @@ -102,8 +102,6 @@ ENTRY(cpu_resume) /* enable the MMU early - so we can access sleep_save_stash by va */ adr_l lr, __enable_mmu /* __cpu_setup will return here */ adr_l x27, _resume_switched /* __enable_mmu will branch here */ - adrp x25, idmap_pg_dir - adrp x26, swapper_pg_dir b __cpu_setup ENDPROC(cpu_resume)