From: cpw@sgi.com Date: Tue, 21 Jun 2011 12:21:33 +0000 (-0500) Subject: x86, UV: Correct UV2 BAU destination timeout X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=ae90c232be376bd8a283f3b6fb37cb5bd2635d67;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git x86, UV: Correct UV2 BAU destination timeout Correct the UV2 broacast assist unit's destination timeout period. And the activation status register in UV2 should be tested for a destination timeout with a 4, not a 2. The values for Active versus Timeout were reversed. This patch is critical for TLB shootdown on an Altix UV2 system (i.e. the follow-on to the current Altix UV). Destination timeout period: The period is set in 4 bits of memory-mapped register MISC_CONTROL. The left bit toggles base period between 10us and 80us. The other 3 bits are the multiplier. Decimal 15, hex f, gives the maximum: 7 * 80us Signed-off-by: Cliff Wickman Link: http://lkml.kernel.org/r/20110621122243.117324443@sgi.com Signed-off-by: Ingo Molnar --- diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h index 16ce58c6d252..37d369859c8e 100644 --- a/arch/x86/include/asm/uv/uv_bau.h +++ b/arch/x86/include/asm/uv/uv_bau.h @@ -67,7 +67,7 @@ * we're using 655us, similar to UV1: 65 units of 10us */ #define UV1_INTD_SOFT_ACK_TIMEOUT_PERIOD (9UL) -#define UV2_INTD_SOFT_ACK_TIMEOUT_PERIOD (65*10UL) +#define UV2_INTD_SOFT_ACK_TIMEOUT_PERIOD (15UL) #define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD (is_uv1_hub() ? \ UV1_INTD_SOFT_ACK_TIMEOUT_PERIOD : \ @@ -106,12 +106,20 @@ #define DS_SOURCE_TIMEOUT 3 /* * bits put together from HRP_LB_BAU_SB_ACTIVATION_STATUS_0/1/2 - * values 1 and 5 will not occur + * values 1 and 3 will not occur + * Decoded meaning ERROR BUSY AUX ERR + * ------------------------------- ---- ----- ------- + * IDLE 0 0 0 + * BUSY (active) 0 1 0 + * SW Ack Timeout (destination) 1 0 0 + * SW Ack INTD rejected (strong NACK) 1 0 1 + * Source Side Time Out Detected 1 1 0 + * Destination Side PUT Failed 1 1 1 */ #define UV2H_DESC_IDLE 0 -#define UV2H_DESC_DEST_TIMEOUT 2 -#define UV2H_DESC_DEST_STRONG_NACK 3 -#define UV2H_DESC_BUSY 4 +#define UV2H_DESC_BUSY 2 +#define UV2H_DESC_DEST_TIMEOUT 4 +#define UV2H_DESC_DEST_STRONG_NACK 5 #define UV2H_DESC_SOURCE_TIMEOUT 6 #define UV2H_DESC_DEST_PUT_ERR 7