From: Daniel Drake Date: Sun, 11 Mar 2007 19:54:11 +0000 (+0000) Subject: [PATCH] zd1211rw: Reject AL2230S devices X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=ae6ead4623bfbc57f3945ff86f27e51811e2e91b;p=GitHub%2FLineageOS%2Fandroid_kernel_samsung_universal7580.git [PATCH] zd1211rw: Reject AL2230S devices zd1211rw currently detects AL2230S-based devices as AL2230, and hence programs the RF incorrectly. Transmit silently fails on this misconfiguration. After this patch, AL2230S devices are rejected with an error message, to avoid any confusion with an apparent driver bug. Signed-off-by: Daniel Drake Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c index 9c64f894b71..9d299bd1885 100644 --- a/drivers/net/wireless/zd1211rw/zd_chip.c +++ b/drivers/net/wireless/zd1211rw/zd_chip.c @@ -337,6 +337,7 @@ static int read_pod(struct zd_chip *chip, u8 *rf_type) chip->patch_cr157 = (value >> 13) & 0x1; chip->patch_6m_band_edge = (value >> 21) & 0x1; chip->new_phy_layout = (value >> 31) & 0x1; + chip->al2230s_bit = (value >> 7) & 0x1; chip->link_led = ((value >> 4) & 1) ? LED1 : LED2; chip->supports_tx_led = 1; if (value & (1 << 24)) { /* LED scenario */ diff --git a/drivers/net/wireless/zd1211rw/zd_chip.h b/drivers/net/wireless/zd1211rw/zd_chip.h index b07569e391e..ae39c225bc9 100644 --- a/drivers/net/wireless/zd1211rw/zd_chip.h +++ b/drivers/net/wireless/zd1211rw/zd_chip.h @@ -711,7 +711,7 @@ struct zd_chip { u16 link_led; unsigned int pa_type:4, patch_cck_gain:1, patch_cr157:1, patch_6m_band_edge:1, - new_phy_layout:1, + new_phy_layout:1, al2230s_bit:1, is_zd1211b:1, supports_tx_led:1; }; diff --git a/drivers/net/wireless/zd1211rw/zd_rf_al2230.c b/drivers/net/wireless/zd1211rw/zd_rf_al2230.c index 25323a13a3d..5235a7827ac 100644 --- a/drivers/net/wireless/zd1211rw/zd_rf_al2230.c +++ b/drivers/net/wireless/zd1211rw/zd_rf_al2230.c @@ -358,6 +358,12 @@ int zd_rf_init_al2230(struct zd_rf *rf) { struct zd_chip *chip = zd_rf_to_chip(rf); + if (chip->al2230s_bit) { + dev_err(zd_chip_dev(chip), "AL2230S devices are not yet " + "supported by this driver.\n"); + return -ENODEV; + } + rf->switch_radio_off = al2230_switch_radio_off; if (chip->is_zd1211b) { rf->init_hw = zd1211b_al2230_init_hw;