From: Joern Engel Date: Tue, 11 Apr 2006 05:54:17 +0000 (-0700) Subject: [PATCH] Remove blkmtd X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=acc8dadc0b3f007e6e60da77feb2efe2a19c5cda;p=GitHub%2FLineageOS%2Fandroid_kernel_samsung_universal7580.git [PATCH] Remove blkmtd Remove the blkmtd driver. - An alternative exists (block2mtd) that hasn't had bug report for > 1 year. - Most embedded people tend to use ancient kernels with custom patches from mtd cvs and elsewhere, so the 1 year warning period neither helps nor hurts them too much. - It's in the way of klibc. The problems caused by pulling blkmtd support are fairly low, while the problems caused by delaying klibc can be fairly substantial. At best, this would be a severe burden on hpa's time. Signed-off-by: Joern Engel Acked-by: Thomas Gleixner Cc: "H. Peter Anvin" Cc: David Woodhouse Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig index dd628cb51e3..7fac438b5c3 100644 --- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig @@ -129,8 +129,8 @@ config MTDRAM_ABS_POS allocating space from Linux's available memory. Otherwise, leave this set to zero. Most people will want to leave this as zero. -config MTD_BLKMTD - tristate "MTD emulation using block device" +config MTD_BLOCK2MTD + tristate "MTD using block device" depends on MTD help This driver allows a block device to appear as an MTD. It would @@ -141,15 +141,6 @@ config MTD_BLKMTD Testing MTD users (eg JFFS2) on large media and media that might be removed during a write (using the floppy drive). -config MTD_BLOCK2MTD - tristate "MTD using block device (rewrite)" - depends on MTD && EXPERIMENTAL - help - This driver is basically the same at MTD_BLKMTD above, but - experienced some interface changes plus serious speedups. In - the long term, it should replace MTD_BLKMTD. Right now, you - shouldn't entrust important data to it yet. - comment "Disk-On-Chip Device Drivers" config MTD_DOC2000 diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile index 7c5ed217838..b6573670316 100644 --- a/drivers/mtd/devices/Makefile +++ b/drivers/mtd/devices/Makefile @@ -21,7 +21,6 @@ obj-$(CONFIG_MTD_PMC551) += pmc551.o obj-$(CONFIG_MTD_MS02NV) += ms02-nv.o obj-$(CONFIG_MTD_MTDRAM) += mtdram.o obj-$(CONFIG_MTD_LART) += lart.o -obj-$(CONFIG_MTD_BLKMTD) += blkmtd.o obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o obj-$(CONFIG_MTD_M25P80) += m25p80.o diff --git a/drivers/mtd/devices/blkmtd.c b/drivers/mtd/devices/blkmtd.c deleted file mode 100644 index 79f2e1f23eb..00000000000 --- a/drivers/mtd/devices/blkmtd.c +++ /dev/null @@ -1,819 +0,0 @@ -/* - * $Id: blkmtd.c,v 1.27 2005/11/07 11:14:24 gleixner Exp $ - * - * blkmtd.c - use a block device as a fake MTD - * - * Author: Simon Evans - * - * Copyright (C) 2001,2002 Simon Evans - * - * Licence: GPL - * - * How it works: - * The driver uses raw/io to read/write the device and the page - * cache to cache access. Writes update the page cache with the - * new data and mark it dirty and add the page into a BIO which - * is then written out. - * - * It can be loaded Read-Only to prevent erases and writes to the - * medium. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define err(format, arg...) printk(KERN_ERR "blkmtd: " format "\n" , ## arg) -#define info(format, arg...) printk(KERN_INFO "blkmtd: " format "\n" , ## arg) -#define warn(format, arg...) printk(KERN_WARNING "blkmtd: " format "\n" , ## arg) -#define crit(format, arg...) printk(KERN_CRIT "blkmtd: " format "\n" , ## arg) - - -/* Default erase size in K, always make it a multiple of PAGE_SIZE */ -#define CONFIG_MTD_BLKDEV_ERASESIZE (128 << 10) /* 128KiB */ -#define VERSION "$Revision: 1.27 $" - -/* Info for the block device */ -struct blkmtd_dev { - struct list_head list; - struct block_device *blkdev; - struct mtd_info mtd_info; - struct mutex wrbuf_mutex; -}; - - -/* Static info about the MTD, used in cleanup_module */ -static LIST_HEAD(blkmtd_device_list); - - -static void blkmtd_sync(struct mtd_info *mtd); - -#define MAX_DEVICES 4 - -/* Module parameters passed by insmod/modprobe */ -static char *device[MAX_DEVICES]; /* the block device to use */ -static int erasesz[MAX_DEVICES]; /* optional default erase size */ -static int ro[MAX_DEVICES]; /* optional read only flag */ -static int sync; - - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Simon Evans "); -MODULE_DESCRIPTION("Emulate an MTD using a block device"); -module_param_array(device, charp, NULL, 0); -MODULE_PARM_DESC(device, "block device to use"); -module_param_array(erasesz, int, NULL, 0); -MODULE_PARM_DESC(erasesz, "optional erase size to use in KiB. eg 4=4KiB."); -module_param_array(ro, bool, NULL, 0); -MODULE_PARM_DESC(ro, "1=Read only, writes and erases cause errors"); -module_param(sync, bool, 0); -MODULE_PARM_DESC(sync, "1=Synchronous writes"); - - -/* completion handler for BIO reads */ -static int bi_read_complete(struct bio *bio, unsigned int bytes_done, int error) -{ - if (bio->bi_size) - return 1; - - complete((struct completion*)bio->bi_private); - return 0; -} - - -/* completion handler for BIO writes */ -static int bi_write_complete(struct bio *bio, unsigned int bytes_done, int error) -{ - const int uptodate = test_bit(BIO_UPTODATE, &bio->bi_flags); - struct bio_vec *bvec = bio->bi_io_vec + bio->bi_vcnt - 1; - - if (bio->bi_size) - return 1; - - if(!uptodate) - err("bi_write_complete: not uptodate\n"); - - do { - struct page *page = bvec->bv_page; - DEBUG(3, "Cleaning up page %ld\n", page->index); - if (--bvec >= bio->bi_io_vec) - prefetchw(&bvec->bv_page->flags); - - if (uptodate) { - SetPageUptodate(page); - } else { - ClearPageUptodate(page); - SetPageError(page); - } - clear_page_dirty(page); - unlock_page(page); - page_cache_release(page); - } while (bvec >= bio->bi_io_vec); - - complete((struct completion*)bio->bi_private); - return 0; -} - - -/* read one page from the block device */ -static int blkmtd_readpage(struct blkmtd_dev *dev, struct page *page) -{ - struct bio *bio; - struct completion event; - int err = -ENOMEM; - - if(PageUptodate(page)) { - DEBUG(2, "blkmtd: readpage page %ld is already upto date\n", page->index); - unlock_page(page); - return 0; - } - - ClearPageUptodate(page); - ClearPageError(page); - - bio = bio_alloc(GFP_KERNEL, 1); - if(bio) { - init_completion(&event); - bio->bi_bdev = dev->blkdev; - bio->bi_sector = page->index << (PAGE_SHIFT-9); - bio->bi_private = &event; - bio->bi_end_io = bi_read_complete; - if(bio_add_page(bio, page, PAGE_SIZE, 0) == PAGE_SIZE) { - submit_bio(READ_SYNC, bio); - wait_for_completion(&event); - err = test_bit(BIO_UPTODATE, &bio->bi_flags) ? 0 : -EIO; - bio_put(bio); - } - } - - if(err) - SetPageError(page); - else - SetPageUptodate(page); - flush_dcache_page(page); - unlock_page(page); - return err; -} - - -/* write out the current BIO and wait for it to finish */ -static int blkmtd_write_out(struct bio *bio) -{ - struct completion event; - int err; - - if(!bio->bi_vcnt) { - bio_put(bio); - return 0; - } - - init_completion(&event); - bio->bi_private = &event; - bio->bi_end_io = bi_write_complete; - submit_bio(WRITE_SYNC, bio); - wait_for_completion(&event); - DEBUG(3, "submit_bio completed, bi_vcnt = %d\n", bio->bi_vcnt); - err = test_bit(BIO_UPTODATE, &bio->bi_flags) ? 0 : -EIO; - bio_put(bio); - return err; -} - - -/** - * blkmtd_add_page - add a page to the current BIO - * @bio: bio to add to (NULL to alloc initial bio) - * @blkdev: block device - * @page: page to add - * @pagecnt: pages left to add - * - * Adds a page to the current bio, allocating it if necessary. If it cannot be - * added, the current bio is written out and a new one is allocated. Returns - * the new bio to add or NULL on error - */ -static struct bio *blkmtd_add_page(struct bio *bio, struct block_device *blkdev, - struct page *page, int pagecnt) -{ - - retry: - if(!bio) { - bio = bio_alloc(GFP_KERNEL, pagecnt); - if(!bio) - return NULL; - bio->bi_sector = page->index << (PAGE_SHIFT-9); - bio->bi_bdev = blkdev; - } - - if(bio_add_page(bio, page, PAGE_SIZE, 0) != PAGE_SIZE) { - blkmtd_write_out(bio); - bio = NULL; - goto retry; - } - return bio; -} - - -/** - * write_pages - write block of data to device via the page cache - * @dev: device to write to - * @buf: data source or NULL if erase (output is set to 0xff) - * @to: offset into output device - * @len: amount to data to write - * @retlen: amount of data written - * - * Grab pages from the page cache and fill them with the source data. - * Non page aligned start and end result in a readin of the page and - * part of the page being modified. Pages are added to the bio and then written - * out. - */ -static int write_pages(struct blkmtd_dev *dev, const u_char *buf, loff_t to, - size_t len, size_t *retlen) -{ - int pagenr, offset; - size_t start_len = 0, end_len; - int pagecnt = 0; - int err = 0; - struct bio *bio = NULL; - size_t thislen = 0; - - pagenr = to >> PAGE_SHIFT; - offset = to & ~PAGE_MASK; - - DEBUG(2, "blkmtd: write_pages: buf = %p to = %ld len = %zd pagenr = %d offset = %d\n", - buf, (long)to, len, pagenr, offset); - - /* see if we have to do a partial write at the start */ - if(offset) { - start_len = ((offset + len) > PAGE_SIZE) ? PAGE_SIZE - offset : len; - len -= start_len; - } - - /* calculate the length of the other two regions */ - end_len = len & ~PAGE_MASK; - len -= end_len; - - if(start_len) - pagecnt++; - - if(len) - pagecnt += len >> PAGE_SHIFT; - - if(end_len) - pagecnt++; - - mutex_lock(&dev->wrbuf_mutex); - - DEBUG(3, "blkmtd: write: start_len = %zd len = %zd end_len = %zd pagecnt = %d\n", - start_len, len, end_len, pagecnt); - - if(start_len) { - /* do partial start region */ - struct page *page; - - DEBUG(3, "blkmtd: write: doing partial start, page = %d len = %zd offset = %d\n", - pagenr, start_len, offset); - - BUG_ON(!buf); - page = read_cache_page(dev->blkdev->bd_inode->i_mapping, pagenr, (filler_t *)blkmtd_readpage, dev); - lock_page(page); - if(PageDirty(page)) { - err("to = %lld start_len = %zd len = %zd end_len = %zd pagenr = %d\n", - to, start_len, len, end_len, pagenr); - BUG(); - } - memcpy(page_address(page)+offset, buf, start_len); - set_page_dirty(page); - SetPageUptodate(page); - buf += start_len; - thislen = start_len; - bio = blkmtd_add_page(bio, dev->blkdev, page, pagecnt); - if(!bio) { - err = -ENOMEM; - err("bio_add_page failed\n"); - goto write_err; - } - pagecnt--; - pagenr++; - } - - /* Now do the main loop to a page aligned, n page sized output */ - if(len) { - int pagesc = len >> PAGE_SHIFT; - DEBUG(3, "blkmtd: write: whole pages start = %d, count = %d\n", - pagenr, pagesc); - while(pagesc) { - struct page *page; - - /* see if page is in the page cache */ - DEBUG(3, "blkmtd: write: grabbing page %d from page cache\n", pagenr); - page = grab_cache_page(dev->blkdev->bd_inode->i_mapping, pagenr); - if(PageDirty(page)) { - BUG(); - } - if(!page) { - warn("write: cannot grab cache page %d", pagenr); - err = -ENOMEM; - goto write_err; - } - if(!buf) { - memset(page_address(page), 0xff, PAGE_SIZE); - } else { - memcpy(page_address(page), buf, PAGE_SIZE); - buf += PAGE_SIZE; - } - bio = blkmtd_add_page(bio, dev->blkdev, page, pagecnt); - if(!bio) { - err = -ENOMEM; - err("bio_add_page failed\n"); - goto write_err; - } - pagenr++; - pagecnt--; - set_page_dirty(page); - SetPageUptodate(page); - pagesc--; - thislen += PAGE_SIZE; - } - } - - if(end_len) { - /* do the third region */ - struct page *page; - DEBUG(3, "blkmtd: write: doing partial end, page = %d len = %zd\n", - pagenr, end_len); - BUG_ON(!buf); - page = read_cache_page(dev->blkdev->bd_inode->i_mapping, pagenr, (filler_t *)blkmtd_readpage, dev); - lock_page(page); - if(PageDirty(page)) { - err("to = %lld start_len = %zd len = %zd end_len = %zd pagenr = %d\n", - to, start_len, len, end_len, pagenr); - BUG(); - } - memcpy(page_address(page), buf, end_len); - set_page_dirty(page); - SetPageUptodate(page); - DEBUG(3, "blkmtd: write: writing out partial end\n"); - thislen += end_len; - bio = blkmtd_add_page(bio, dev->blkdev, page, pagecnt); - if(!bio) { - err = -ENOMEM; - err("bio_add_page failed\n"); - goto write_err; - } - pagenr++; - } - - DEBUG(3, "blkmtd: write: got %d vectors to write\n", bio->bi_vcnt); - write_err: - if(bio) - blkmtd_write_out(bio); - - DEBUG(2, "blkmtd: write: end, retlen = %zd, err = %d\n", *retlen, err); - mutex_unlock(&dev->wrbuf_mutex); - - if(retlen) - *retlen = thislen; - return err; -} - - -/* erase a specified part of the device */ -static int blkmtd_erase(struct mtd_info *mtd, struct erase_info *instr) -{ - struct blkmtd_dev *dev = mtd->priv; - struct mtd_erase_region_info *einfo = mtd->eraseregions; - int numregions = mtd->numeraseregions; - size_t from; - u_long len; - int err = -EIO; - size_t retlen; - - instr->state = MTD_ERASING; - from = instr->addr; - len = instr->len; - - /* check erase region has valid start and length */ - DEBUG(2, "blkmtd: erase: dev = `%s' from = 0x%zx len = 0x%lx\n", - mtd->name+9, from, len); - while(numregions) { - DEBUG(3, "blkmtd: checking erase region = 0x%08X size = 0x%X num = 0x%x\n", - einfo->offset, einfo->erasesize, einfo->numblocks); - if(from >= einfo->offset - && from < einfo->offset + (einfo->erasesize * einfo->numblocks)) { - if(len == einfo->erasesize - && ( (from - einfo->offset) % einfo->erasesize == 0)) - break; - } - numregions--; - einfo++; - } - - if(!numregions) { - /* Not a valid erase block */ - err("erase: invalid erase request 0x%lX @ 0x%08zX", len, from); - instr->state = MTD_ERASE_FAILED; - err = -EIO; - } - - if(instr->state != MTD_ERASE_FAILED) { - /* do the erase */ - DEBUG(3, "Doing erase from = %zd len = %ld\n", from, len); - err = write_pages(dev, NULL, from, len, &retlen); - if(err || retlen != len) { - err("erase failed err = %d", err); - instr->state = MTD_ERASE_FAILED; - } else { - instr->state = MTD_ERASE_DONE; - } - } - - DEBUG(3, "blkmtd: erase: checking callback\n"); - mtd_erase_callback(instr); - DEBUG(2, "blkmtd: erase: finished (err = %d)\n", err); - return err; -} - - -/* read a range of the data via the page cache */ -static int blkmtd_read(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, u_char *buf) -{ - struct blkmtd_dev *dev = mtd->priv; - int err = 0; - int offset; - int pagenr, pages; - size_t thislen = 0; - - DEBUG(2, "blkmtd: read: dev = `%s' from = %lld len = %zd buf = %p\n", - mtd->name+9, from, len, buf); - - if(from > mtd->size) - return -EINVAL; - if(from + len > mtd->size) - len = mtd->size - from; - - pagenr = from >> PAGE_SHIFT; - offset = from - (pagenr << PAGE_SHIFT); - - pages = (offset+len+PAGE_SIZE-1) >> PAGE_SHIFT; - DEBUG(3, "blkmtd: read: pagenr = %d offset = %d, pages = %d\n", - pagenr, offset, pages); - - while(pages) { - struct page *page; - int cpylen; - - DEBUG(3, "blkmtd: read: looking for page: %d\n", pagenr); - page = read_cache_page(dev->blkdev->bd_inode->i_mapping, pagenr, (filler_t *)blkmtd_readpage, dev); - if(IS_ERR(page)) { - err = -EIO; - goto readerr; - } - - cpylen = (PAGE_SIZE > len) ? len : PAGE_SIZE; - if(offset+cpylen > PAGE_SIZE) - cpylen = PAGE_SIZE-offset; - - memcpy(buf + thislen, page_address(page) + offset, cpylen); - offset = 0; - len -= cpylen; - thislen += cpylen; - pagenr++; - pages--; - if(!PageDirty(page)) - page_cache_release(page); - } - - readerr: - if(retlen) - *retlen = thislen; - DEBUG(2, "blkmtd: end read: retlen = %zd, err = %d\n", thislen, err); - return err; -} - - -/* write data to the underlying device */ -static int blkmtd_write(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf) -{ - struct blkmtd_dev *dev = mtd->priv; - int err; - - if(!len) - return 0; - - DEBUG(2, "blkmtd: write: dev = `%s' to = %lld len = %zd buf = %p\n", - mtd->name+9, to, len, buf); - - if(to >= mtd->size) { - return -ENOSPC; - } - - if(to + len > mtd->size) { - len = mtd->size - to; - } - - err = write_pages(dev, buf, to, len, retlen); - if(err > 0) - err = 0; - DEBUG(2, "blkmtd: write: end, err = %d\n", err); - return err; -} - - -/* sync the device - wait until the write queue is empty */ -static void blkmtd_sync(struct mtd_info *mtd) -{ - /* Currently all writes are synchronous */ -} - - -static void free_device(struct blkmtd_dev *dev) -{ - DEBUG(2, "blkmtd: free_device() dev = %p\n", dev); - if(dev) { - kfree(dev->mtd_info.eraseregions); - kfree(dev->mtd_info.name); - if(dev->blkdev) { - invalidate_inode_pages(dev->blkdev->bd_inode->i_mapping); - close_bdev_excl(dev->blkdev); - } - kfree(dev); - } -} - - -/* For a given size and initial erase size, calculate the number - * and size of each erase region. Goes round the loop twice, - * once to find out how many regions, then allocates space, - * then round the loop again to fill it in. - */ -static struct mtd_erase_region_info *calc_erase_regions( - size_t erase_size, size_t total_size, int *regions) -{ - struct mtd_erase_region_info *info = NULL; - - DEBUG(2, "calc_erase_regions, es = %zd size = %zd regions = %d\n", - erase_size, total_size, *regions); - /* Make any user specified erasesize be a power of 2 - and at least PAGE_SIZE */ - if(erase_size) { - int es = erase_size; - erase_size = 1; - while(es != 1) { - es >>= 1; - erase_size <<= 1; - } - if(erase_size < PAGE_SIZE) - erase_size = PAGE_SIZE; - } else { - erase_size = CONFIG_MTD_BLKDEV_ERASESIZE; - } - - *regions = 0; - - do { - int tot_size = total_size; - int er_size = erase_size; - int count = 0, offset = 0, regcnt = 0; - - while(tot_size) { - count = tot_size / er_size; - if(count) { - tot_size = tot_size % er_size; - if(info) { - DEBUG(2, "adding to erase info off=%d er=%d cnt=%d\n", - offset, er_size, count); - (info+regcnt)->offset = offset; - (info+regcnt)->erasesize = er_size; - (info+regcnt)->numblocks = count; - (*regions)++; - } - regcnt++; - offset += (count * er_size); - } - while(er_size > tot_size) - er_size >>= 1; - } - if(info == NULL) { - info = kmalloc(regcnt * sizeof(struct mtd_erase_region_info), GFP_KERNEL); - if(!info) - break; - } - } while(!(*regions)); - DEBUG(2, "calc_erase_regions done, es = %zd size = %zd regions = %d\n", - erase_size, total_size, *regions); - return info; -} - - -static struct blkmtd_dev *add_device(char *devname, int readonly, int erase_size) -{ - struct block_device *bdev; - int mode; - struct blkmtd_dev *dev; - - if(!devname) - return NULL; - - /* Get a handle on the device */ - - -#ifdef MODULE - mode = (readonly) ? O_RDONLY : O_RDWR; - bdev = open_bdev_excl(devname, mode, NULL); -#else - mode = (readonly) ? FMODE_READ : FMODE_WRITE; - bdev = open_by_devnum(name_to_dev_t(devname), mode); -#endif - if(IS_ERR(bdev)) { - err("error: cannot open device %s", devname); - DEBUG(2, "blkmtd: opening bdev returned %ld\n", PTR_ERR(bdev)); - return NULL; - } - - DEBUG(1, "blkmtd: found a block device major = %d, minor = %d\n", - MAJOR(bdev->bd_dev), MINOR(bdev->bd_dev)); - - if(MAJOR(bdev->bd_dev) == MTD_BLOCK_MAJOR) { - err("attempting to use an MTD device as a block device"); - blkdev_put(bdev); - return NULL; - } - - dev = kmalloc(sizeof(struct blkmtd_dev), GFP_KERNEL); - if(dev == NULL) { - blkdev_put(bdev); - return NULL; - } - - memset(dev, 0, sizeof(struct blkmtd_dev)); - dev->blkdev = bdev; - if(!readonly) { - mutex_init(&dev->wrbuf_mutex); - } - - dev->mtd_info.size = dev->blkdev->bd_inode->i_size & PAGE_MASK; - - /* Setup the MTD structure */ - /* make the name contain the block device in */ - dev->mtd_info.name = kmalloc(sizeof("blkmtd: ") + strlen(devname), GFP_KERNEL); - if(dev->mtd_info.name == NULL) - goto devinit_err; - - sprintf(dev->mtd_info.name, "blkmtd: %s", devname); - dev->mtd_info.eraseregions = calc_erase_regions(erase_size, dev->mtd_info.size, - &dev->mtd_info.numeraseregions); - if(dev->mtd_info.eraseregions == NULL) - goto devinit_err; - - dev->mtd_info.erasesize = dev->mtd_info.eraseregions->erasesize; - DEBUG(1, "blkmtd: init: found %d erase regions\n", - dev->mtd_info.numeraseregions); - - if(readonly) { - dev->mtd_info.type = MTD_ROM; - dev->mtd_info.flags = MTD_CAP_ROM; - } else { - dev->mtd_info.type = MTD_RAM; - dev->mtd_info.flags = MTD_CAP_RAM; - dev->mtd_info.erase = blkmtd_erase; - dev->mtd_info.write = blkmtd_write; - dev->mtd_info.writev = default_mtd_writev; - dev->mtd_info.sync = blkmtd_sync; - } - dev->mtd_info.read = blkmtd_read; - dev->mtd_info.readv = default_mtd_readv; - dev->mtd_info.priv = dev; - dev->mtd_info.owner = THIS_MODULE; - - list_add(&dev->list, &blkmtd_device_list); - if (add_mtd_device(&dev->mtd_info)) { - /* Device didnt get added, so free the entry */ - list_del(&dev->list); - goto devinit_err; - } else { - info("mtd%d: [%s] erase_size = %dKiB %s", - dev->mtd_info.index, dev->mtd_info.name + strlen("blkmtd: "), - dev->mtd_info.erasesize >> 10, - readonly ? "(read-only)" : ""); - } - - return dev; - - devinit_err: - free_device(dev); - return NULL; -} - - -/* Cleanup and exit - sync the device and kill of the kernel thread */ -static void __devexit cleanup_blkmtd(void) -{ - struct list_head *temp1, *temp2; - - /* Remove the MTD devices */ - list_for_each_safe(temp1, temp2, &blkmtd_device_list) { - struct blkmtd_dev *dev = list_entry(temp1, struct blkmtd_dev, - list); - blkmtd_sync(&dev->mtd_info); - del_mtd_device(&dev->mtd_info); - info("mtd%d: [%s] removed", dev->mtd_info.index, - dev->mtd_info.name + strlen("blkmtd: ")); - list_del(&dev->list); - free_device(dev); - } -} - -#ifndef MODULE - -/* Handle kernel boot params */ - - -static int __init param_blkmtd_device(char *str) -{ - int i; - - for(i = 0; i < MAX_DEVICES; i++) { - device[i] = str; - DEBUG(2, "blkmtd: device setup: %d = %s\n", i, device[i]); - strsep(&str, ","); - } - return 1; -} - - -static int __init param_blkmtd_erasesz(char *str) -{ - int i; - for(i = 0; i < MAX_DEVICES; i++) { - char *val = strsep(&str, ","); - if(val) - erasesz[i] = simple_strtoul(val, NULL, 0); - DEBUG(2, "blkmtd: erasesz setup: %d = %d\n", i, erasesz[i]); - } - - return 1; -} - - -static int __init param_blkmtd_ro(char *str) -{ - int i; - for(i = 0; i < MAX_DEVICES; i++) { - char *val = strsep(&str, ","); - if(val) - ro[i] = simple_strtoul(val, NULL, 0); - DEBUG(2, "blkmtd: ro setup: %d = %d\n", i, ro[i]); - } - - return 1; -} - - -static int __init param_blkmtd_sync(char *str) -{ - if(str[0] == '1') - sync = 1; - return 1; -} - -__setup("blkmtd_device=", param_blkmtd_device); -__setup("blkmtd_erasesz=", param_blkmtd_erasesz); -__setup("blkmtd_ro=", param_blkmtd_ro); -__setup("blkmtd_sync=", param_blkmtd_sync); - -#endif - - -/* Startup */ -static int __init init_blkmtd(void) -{ - int i; - - info("version " VERSION); - /* Check args - device[0] is the bare minimum*/ - if(!device[0]) { - err("error: missing `device' name\n"); - return -EINVAL; - } - - for(i = 0; i < MAX_DEVICES; i++) - add_device(device[i], ro[i], erasesz[i] << 10); - - if(list_empty(&blkmtd_device_list)) - return -EINVAL; - - return 0; -} - -module_init(init_blkmtd); -module_exit(cleanup_blkmtd);