From: Alexander Duyck Date: Wed, 24 Jun 2015 20:34:49 +0000 (-0700) Subject: fm10k: Only trigger data path reset if fabric is up X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=ac98100359e098d03dbd98783ca4becaf2ea7ec3;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git fm10k: Only trigger data path reset if fabric is up This change makes it so that we only trigger the data path reset if the fabric is ready to handle traffic. The general idea is to avoid triggering the reset unless the switch API is ready for us. Otherwise we can just postpone the reset until we receive a switch ready notification. Signed-off-by: Alexander Duyck Signed-off-by: Jacob Keller Signed-off-by: Jeff Kirsher --- diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pf.c b/drivers/net/ethernet/intel/fm10k/fm10k_pf.c index 241b969626bc..d806d87a6192 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k_pf.c +++ b/drivers/net/ethernet/intel/fm10k/fm10k_pf.c @@ -59,6 +59,11 @@ static s32 fm10k_reset_hw_pf(struct fm10k_hw *hw) if (reg & (FM10K_DMA_CTRL_TX_ACTIVE | FM10K_DMA_CTRL_RX_ACTIVE)) return FM10K_ERR_DMA_PENDING; + /* verify the switch is ready for reset */ + reg = fm10k_read_reg(hw, FM10K_DMA_CTRL2); + if (!(reg & FM10K_DMA_CTRL2_SWITCH_READY)) + goto out; + /* Inititate data path reset */ reg |= FM10K_DMA_CTRL_DATAPATH_RESET; fm10k_write_reg(hw, FM10K_DMA_CTRL, reg); @@ -72,6 +77,7 @@ static s32 fm10k_reset_hw_pf(struct fm10k_hw *hw) if (!(reg & FM10K_IP_NOTINRESET)) err = FM10K_ERR_RESET_FAILED; +out: return err; }